Washer Clip Or Clamp

Best Seller

Genuine Lg part

Outer Door Boot Seal Clamp

By: Lg

Part Number: ACA56078801

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

Water leaks from the door area during the wash cycle
Loose or shifting door boot seal
Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

Do-It-Yourself Stories from Customers like You LG front load washer door gasket needed replacement due to mold buildup Howard F. • Port Orange , FL • April 15, 2020

If you have an older model WM8000H_A you MUST pay attention to the type of door gasket (boot seal) that it uses. Every video I could find for replacing the seal on the WM8000HWA involved a different product than what was required for our specific washer. I wound up getting the wrong one by ordering it without help and had to exchange it - after I had the machine taken apart. Thanks to AppliancePartsPros I got the correct seal and front retaining ring the next day. NOTE! The retaining rings are... Read more

$20.62

Compare At:: $24.74
You Save:: $4.12

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Lg part

Outer Door Gasket Clamp

4.9 (85)

By: Lg

Part Number: 2W20017E

The Outer Door Gasket Clamp is an OEM part for LG washing machines. It is designed to secure the outer door gasket, ensuring a tight seal between the door and the drum. This helps prevent water leaks during the wash cycle and maintains the efficiency of the washing machine.

Causes of a bad outer door gasket clamp can include regular wear and tear, damage from heavy use, or corrosion over time. A compromised clamp can lead to a loose gasket, resulting in water leaks and reduced washing machine performance.

Symptoms of a bad Outer Door Gasket Clamp include:

Water leaking from the door area during wash cycles
A loose or misaligned door gasket
Difficulty in securing the door properly
Visible rust or damage on the clamp

This OEM LG part is also compatible with Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Washer basket was loose banging/knocking when running eventually gave a 'load out of balance code" Dwayne D. • Hopewell Junction , NY • September 29, 2014

The repair was fairly straight foward as shown in the video. However, driving the shaft from the bearings took some doing. It required replacing the use of the board with a spare bolt and a 2lb hand sledge. (having an air hammer as reserve, also not a bad idea) I rated this reair as a "1" however I've been an auto mechanic for 40 years. If you do not have good general mechanical ablities you may find this more challenging as you get it further apart. I suggest anyone making this repair should... Read more

$20.62

Compare At:: $24.54
You Save:: $3.92

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Timer Knob Clip

4.9 (74)

By: Ge

Part Number: WH1X2117

The Timer Knob Clip is an OEM part for GE washing machines. It secures the timer knob to the timer shaft, allowing users to set and adjust the washing cycle duration accurately.

You should replace the timer knob clip if it becomes worn out, broken, or lost. Common causes of a bad timer knob clip include regular use leading to wear and tear, physical damage from excessive force, or accidental breakage during maintenance or operation.

Symptoms of a bad timer knob clip include:

The timer knob spinning freely without engaging
Difficulty in setting or adjusting the timer
The timer knob falling off or feeling loose
The washing machine not starting or stopping cycles correctly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drain Hose Clip

5.0 (84)

By: Ge

Part Number: WH16X513

The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.

Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.

Symptoms of a bad drain hose clip include:

Water leaking from the back of the washer
Drain hose detaching or becoming loose during operation
Difficulty securing the drain hose in place
Visible damage or cracking on the clip

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the entire drain hose, use part number WH41X10096.

Do-It-Yourself Stories from Customers like You Discharge hose for 15 year old hot point washer Edith P. • Shelton , CT • October 06, 2014

The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars, Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Clutch Band And Lining Kit

4.8 (43)

By: Whirlpool

Part Number: 285790

The Clutch Band and Lining Kit is an OEM part for Whirlpool washing machines. It contains the clutch band and clutch lining components essential for proper transmission of power from the washer motor to its drum during the spin cycle. The clutch band and lining allow for a controlled amount of slippage to safely extract water from clothes without damage.

Symptoms of a bad clutch band and lining include:

Excessive noise or vibration during spin
Slow or ineffective spinning
The drum failing to spin or “locking up”
Premature wear of other transmission parts

Over time and with heavy use, these components can wear down. If slipping or damage is detected, it’s important to replace the kit to avoid potential transmission repairs.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Spins slowly
Will not agitate
Pumps but will not spin

Do-It-Yourself Stories from Customers like You Squealing during spin cycle and very weak agitation Elijah S. • Stockton , CA • May 24, 2015

My parents have the older 80 series washer and dryer that gets used way more than a consumer washer and dryer was ever meant to be used. The washing machine finally said im tired. During the spin cycle it was making a really loud squealing noise and during the agitation cycle it would barely agitate the clothes. So i ordered the basket drive to get rid of the squealing during spin cycle and noticed the dogs on the cams were warn and werent grabbing so ordered the whole cam kit to be safe... Read more

$44.95

Compare At:: $53.49
You Save:: $8.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Compression Ring

4.9 (22)

By: Ge

Part Number: WH02X10093

The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.

You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.

Symptoms of a bad compression ring include:

Excessive shaking or movement of the washing machine during cycles
Unusual noises during operation
The washing machine tub appearing misaligned or loose
Ineffective washing due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft Jeffery B. • Donalsonville , GA • September 04, 2015

I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting... Read more

$18.95

Compare At:: $22.55
You Save:: $3.60

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Lg part

Inner Door Gasket Clamp

4.7 (23)

By: Lg

Part Number: 4861ER2001D

The Inner Door Gasket Clamp is an OEM part for LG washing machines. It secures the inner door gasket in place, ensuring a tight seal to prevent water leaks during the wash cycle. This clamp is essential for maintaining the efficiency and reliability of the washing machine by keeping the door gasket firmly in position.

Over time, wear and tear, exposure to water and detergent, or accidental mishandling can compromise the integrity of the clamp, leading to potential leaks.

Symptoms of a bad inner door gasket clamp include:

Water leaking from the door area
The door gasket not staying securely in place
Visible damage or corrosion on the clamp

This OEM LG part is also compatible with Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020

The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back... Read more

$37.58

Compare At:: $45.10
You Save:: $7.52

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hose Clamp

5.0 (24)

By: Whirlpool

Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

Leaks at the hose connection points
Hoses slipping off the connections
Visible rust or damage on the clamp
Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not stop filling with water
Leaking

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Outer Door Boot Seal Clamp

4.9 (23)

By: Ge

Part Number: WH01X10279

The Outer Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp ensures that the seal is tightly held in place, preventing water from leaking out of the front load washer during operation.

Causes of a bad Outer Door Boot Seal Clamp can range from corrosion due to exposure to moisture and detergents, to physical damage from improper installation or removal of the door seal.

Symptoms of a malfunctioning Outer Door Boot Seal Clamp include:

Water leaking from the front of the washing machine
The door boot seal coming loose or detaching from the front panel
Visible damage or corrosion on the clamp, compromising its integrity

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Leaking rubber gasket GE washer model no: wpdh8800j3mg Michael C. • North Truro , MA • January 22, 2024

I replaced the following parts in the GE WASHER that I have owned for approximately 14 years: Part no.: WH08X10038 - rubber gasket Part no.: WH01X10277 - inside gasket clamp Part no.: WH01x10279 - outside gasket clamp The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago. I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years... Read more

$22.52

Compare At:: $26.80
You Save:: $4.28

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hose Clamp

4.9 (17)

By: Whirlpool

Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

Water leaks around the hose connection points
The hose slipping off the fitting
Visible rust or wear on the clamp
Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

$9.95

Compare At:: $11.74
You Save:: $1.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Lg part

Hose Clamp

4.9 (16)

By: Lg

Part Number: 4861FR3068A

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

Water leaking from hose connections
Hoses coming loose or detaching during operation
Visible rust or damage on the clamp
Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Do-It-Yourself Stories from Customers like You Bad bearings seal and spider David R. • Jacksonville , FL • February 04, 2017

If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it. After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.) Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with... Read more

$11.95

Compare At:: $14.10
You Save:: $2.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Clamp (Hose/Boot Connection)

4.5 (4)

By: Frigidaire

Part Number: 134616300

This clamp secures a flexible connection inside your appliance, holding a hose or boot firmly to its fitting to maintain a tight, leak-resistant seal and prevent connections from backing off during operation. What it does:

Holds a hose or boot to a tub, pump, or port to keep the joint sealed
Helps prevent leaks and disconnections from vibration or pressure changes
Restores proper sealing when the original clamp is stretched, rusted, broken, or missing
Typical symptoms include drips at the joint, a loose/slipping connection, or visible clamp damage

What's included:

1 clamp

Install notes:

Disconnect power and turn off water supply; place a towel to catch residual water
Note the clamp's position before removal; seat the hose/boot fully over the fitting bead
Position the clamp just behind the bead and engage/tighten it evenly
Run a short test cycle and check the joint for leaks

Do-It-Yourself Stories from Customers like You E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

$22.95

Compare At:: $27.54
You Save:: $4.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Lg part

Suspension Spring Holder

4.9 (11)

By: Lg

Part Number: 4930FR3040A

The Suspension Spring Holder is an OEM part for LG washing machines. This holder supports the suspension springs that help stabilize the washer drum during operation, reducing vibration and movement. It plays a critical role in ensuring smooth and quiet operation of the washing machine.

Over time, the suspension spring holder can become worn or damaged due to regular use, heavy loads, or accidental impacts. Causes of a bad suspension spring holder include wear and tear, physical damage, or corrosion from moisture exposure.

Symptoms of a bad suspension spring holder include:

Excessive vibration or shaking during wash cycles
Unusual noises, such as banging or clunking
The washer drum appearing misaligned or sagging
The washing machine moving or walking during operation

This OEM LG part is also compatible with Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Lg washer was rocking really badly and the drum was hitting the sides during every spin cycle and even coming off the top spring mount Benjamin M. • Lynchburg , VA • January 18, 2016

Replaced all three dampers and then replaced locking gaskets for the top spring mounts for the drum, replaced the old feet pads I had and works like a charm! Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Bosch part

Fastening Ring

5.0 (5)

By: Bosch

Part Number: 00439671

The Fastening Ring is an OEM part for Bosch front load washers. It secures the door boot seal to the front panel of the washer, ensuring a tight and leak-free connection. This ring is essential for maintaining the washer's seal during operation, preventing water from escaping the drum.

Causes of a bad fastening ring can include normal wear and tear, rust or corrosion, and damage from over-tightening or mishandling during maintenance.

Symptoms of a bad fastening ring include:

Water leaking from the door area
The door boot seal becoming loose or detached
Visible damage or deformation of the ring

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking washing machine replaced rubber door boot.. Gerhard P. • Dagsboro , DE • November 04, 2019

Fixing was easy and took approximately 1 hour. I have a Bosch Axxis washing machine and all parts came exactly as ordered and within 2 days of order. I had to take off front and top panel and the door switch. The new wire and spring was part of the order and I had to pay for it. The old parts looked fine to me and I could have reused them but since I had the new ones, I replaced them anyhow. I wish I would have the option to buy the rubber gasket only. Read more

$16.68

Compare At:: $19.68
You Save:: $3.00

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Anti-Siphon Clip (Drain Hose)

4.9 (12)

By: Ge

Part Number: WH1X2725

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

Maintains an air break at the drain to help stop unintended siphoning
Holds the drain hose securely to a standpipe or sink/tub
Helps prevent "filling and draining at the same time" or low water levels
Helps keep the hose from vibrating loose or popping out during cycles

What's included: 1 anti-siphon clip Install notes:

Unplug the appliance and shut off water before starting
Route the drain hose per the installation manual; avoid kinks or submerging the hose end
Snap the clip onto the hose and fasten it to the standpipe or tub edge
Run a quick test to verify no leaks and correct hose position

Do-It-Yourself Stories from Customers like You Burned out capacitor Mary V. • Ellenton , FL • June 06, 2016

My son fixed it Read more

$13.95

Compare At:: $16.60
You Save:: $2.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Inner Door Boot Seal Clamp

4.8 (11)

By: Ge

Part Number: WH01X10277

The Inner Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp secures the door boot seal, ensuring it stays in place and forms a watertight barrier between the washer door and drum.

Causes of a bad clamp can include regular wear and tear, corrosion from detergent and water exposure, or physical damage from rough handling.

Symptoms of a bad inner door boot seal clamp include:

Water leaking from the front of the washing machine
The door boot seal coming loose or not staying in place
The washing machine door not closing properly
Visible rust or damage on the clamp

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking rubber gasket GE washer model no: wpdh8800j3mg Michael C. • North Truro , MA • January 22, 2024

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Washer clip or clamp replacement parts are essential to keep your home running smoothly. These small but mighty components play a crucial role in ensuring your washing machine operates at peak performance, securing hoses and connections, and preventing leaks and malfunctions.

Washing machines are fundamental in any household, making laundry tasks more efficient. With quality washer clips and clamps, you can maintain or restore your washing machine's functionality with ease. Properly secured hoses ensure that water stays where it's supposed to, minimizing the risk of damage to your home and extending the life of your appliance. OEM replacement parts, in particular, offer a promise of exceptional quality and perfect compatibility, fitting seamlessly into your existing setup.

Knowing you have access to durable and dependable washer clips and clamps brings peace of mind. You can be confident that these parts will keep your washing machine running smoothly, allowing you to focus on more enjoyable aspects of life.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Washer Clip Or Clamp

Outer Door Boot Seal Clamp

Outer Door Gasket Clamp

Timer Knob Clip

Drain Hose Clip

Clutch Band And Lining Kit

Compression Ring

Inner Door Gasket Clamp

Hose Clamp

Outer Door Boot Seal Clamp

Hose Clamp

Hose Clamp

Clamp (Hose/Boot Connection)

Suspension Spring Holder

Fastening Ring

Anti-Siphon Clip (Drain Hose)

Inner Door Boot Seal Clamp

Brands

Common Problems