Whirlpool Dishwasher Parts

This rinse aid sensor detects the presence/level of rinse aid and signals the dishwasher control so the dispenser and cycle logic respond correctly. Replaces a failed sensor to restore proper rinse-aid detection. What it does

• Acts as a reed-style sensor that notifies the control when rinse aid is present
• Helps the dispenser and control board make rinse-aid–related decisions
• Commonly replaced when rinse-aid indicators fail or rinse-aid detection errors occur
• Small, low-voltage sensing device used in the dishwasher dispenser area

• One rinse aid sensor (reed switch)

• Disconnect power to the appliance before starting any service
• Access may require removing the door inner panel or dispenser assembly; follow the service manual
• Handle gently and avoid bending the sensor leads; ensure secure electrical connections

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

Bottle with brush. Acyrlic touch-up paint. Color: Empire red. Size: 0.6 fl.oz.

Replacement plate holder clip assembly that secures the appliance's glass plate or tray to the drive hub, helping restore stable, even rotation and reduce wobble or slipping during use. What it does:

• Secures the glass plate or tray to the drive hub so it rotates evenly
• Helps prevent the plate from wobbling, scraping, or slipping out of position
• Can reduce noisy or irregular turntable movement
• Supports consistent heating by keeping the plate aligned

• Disconnect power before servicing the appliance to avoid electric shock
• Remove the glass plate and turntable support to access the clip; handle glass carefully
• Press the clip onto the drive hub or shaft until fully seated
• After installation, reinstall the plate and run a short test cycle to ensure smooth rotation

Includes 6` Stainless Steel Braided Hose, Power cord & Connectors

This is the center lid that fits into the washing basket/tub assembly to cover the center opening and help contain laundry during the wash cycle. It restores a proper seal and keeps items from entering the agitator area. What it does:

• Covers the center opening of the washer basket to prevent clothes from getting caught in the agitator
• Helps maintain normal wash action and water containment around the tub center
• Can resolve symptoms like items snagging near the agitator, visible gap in the basket center, or loose/missing center cover
• Matches OEM fit and geometry for correct placement in the basket assembly

• One lid, basket center

• Disconnect power and water to the appliance before beginning any repair
• Removal/install typically requires accessing the washer basket; follow the OEM service manual for steps
• Use hand tools as needed and avoid forcing plastic tabs to prevent breakage

Collector hose assembly that channels wastewater from internal tubs to the drain area. Replace if cracked, leaking, or damaged to prevent water leaks.

Secures panels and components in your dishwasher to prevent shifting and rattling. Replace if cracked, broken, or missing to restore proper alignment.

Replacement push button for dishwasher control panels. Restores tactile interface when original button is cracked, broken, worn, or missing.

Prevents backflow from sink into dishwasher drain line. Replace if cracked, leaking, or missing. Installs at sink edge to create air break.

Inset control knob for cooktop or range. Replaces worn, cracked, or broken original knobs. Restores secure grip and control of burner settings.

Replacement mounting screw for dishwashers. Secures panels, brackets, and internal components. Order a new screw if yours is stripped, missing, or damaged.

Secures your dishwasher to the floor by attaching to the metal base flange. Replace if bracket is bent, broken, or missing from your installation.

Water fill hose for dishwashers. Connects water supply to the tub inlet valve. Replace if cracked, leaking, kinked, or damaged to restore proper fill.

Replace your dishwasher's spring adjustment bracket if cracked, bent, or missing. This structural component secures the spring mechanism inside your unit.