Need Help?
Call
Replacement dispenser actuator pads for refrigerator ice and water controls. Installs on dispenser housing. Replace if cracked, broken, or worn.
Replaced the actuator pad on the Whirlpool Gold Series, releasing the electronic menu pad to get to the water activator pad was the biggest hurdle. The release tabs are underneath the menu pad and you may feel as if you may break them when releasing them. They did not break but I did hold by breath. Read more
Fix a detergent lid that won't stay closed or open properly with this dispenser lid pin. Simple repair with video guide—most DIYers complete in minutes.
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more
Soap not dispensing or lid won't open during cycle? This dishwasher dispenser assembly releases detergent and rinse aid at the right time. Moderate DIY.
Replaced dispenser Read more
The Dispenser Lid is an OEM replacement part for Whirlpool dishwashers. Located at the top of the dishwasher door, it provides access to add detergent and rinse aid to the internal dispenser compartment below. This dishwasher soap dispenser lid is included in the dispenser cover kit 4387043. Causes of a bad dispenser lid can include wear and tear of hinge points from years of repeated openings. Cracks may also arise in the plastic material. Symptoms of a bad Dispenser Lid include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Amana, and some Kenmore models.
I watched the video on your site and it showed step by step how to replace the spring. Excellent shipping time. Good customer service on chat forum. Read more
This is a gray dispenser actuator pad located on the front of the refrigerator's water or ice dispenser. It serves as the push pad that you press with a glass or cup to activate the dispenser mechanism. Replace this part if it is cracked, broken, or missing, or if pressing the dispenser no longer reliably triggers water or ice output.
Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks Read more
Refrigerator dispenser pad installs on the control panel for water and ice operation. Replace if cracked, unresponsive, or causing erratic dispensing.
I researched the part needed and ordered it from appliance parts store Read more
Fix F30 error codes and non-dispensing detergent drawers. This dispenser motor assembly controls detergent release timing. 30-minute DIY repair with video.
My appliance is a Kenmore, and even though the video mentioned lots of other brands, it showed the exact same problem I was having. My dispenser motor just spun and spun, never stopping at the various positions it was apparently supposed to. Then it would trip the F30 code. The part description again mentioned these other brands but did say in fine print it fits some Kenmore products. I could tell visually from the video the part was the same as on my washer so I felt confident the part... Read more
This fabric softener dispenser assembly stores the softener and releases it at the proper time in the rinse cycle. Replace a cracked, clogged, or missing dispenser to restore reliable dispensing and help prevent leaks or residue.
This company is great & I highly recommend it to anyone. I was beyond pleased with the customer service when I called to order my part. The price was unbelievably cheap. I ordered it on Friday at 5:00 pm & it was delivered less than 24 hours later! I will definitely use A.P.P. again. Read more
White plastic lever that activates refrigerator water dispensing. Replaces stained, discolored, cracked, or loose levers on door dispenser assembly.
Once the parts arrived, I followed the help video that was emailed to me with my order confirmation step by step. Super useful! The video quality and editing were well done and the instructions were very specific. I felt like a pro! Read more
White paddle that activates your refrigerator's ice dispenser. Replace if cracked, broken, stained, or worn to restore a clean appearance and smooth operation.
Replacement water dispenser lever for refrigerators. Installs on the front control panel to activate water flow. Replace if cracked, stained, or broken.
Even though the refrigerator is 13 years old, I was able to find replacement parts on your site. The DIY video provided on-line for each of the four parts ordered was very helpful ; even though my refrigerator wasn't exactly like the one in the video, it was still helpful. I'm not usually the DIY type- but with your help the repair was very successful! Thank you ! Read more
Fixes broken or cracked detergent drawer that won't stay in place. Simple 5-minute replacement—just pull out old drawer and snap in new one.
Had to buy a new draw handle and detergent draw..they attach together by two plastic tabs that take a lot of stress each time you open it..unfortunately had to buy both to fix the problem.. Read more
Grille sits below the water and ice dispenser on your refrigerator door to catch spills. Replace if cracked, stained, or damaged. Snaps into place.
The Actuator is an OEM part for Whirlpool dishwashers. This actuator is responsible for releasing detergent from the dispenser at the appropriate time during the wash cycle, ensuring effective cleaning of the dishes.
Causes of a bad detergent dispenser actuator can include electrical malfunctions, wear and tear from frequent use, or physical damage to the actuator mechanism.
Symptoms of a bad detergent dispenser actuator include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Fix a broken or cracked dispenser drawer handle that won't open or close properly. Simple snap-in replacement takes about 2 minutes with no tools required.
I called and was given fabulous service. I received the part the next day. It just snapped in. Read more
Cracked bleach dispenser leaking onto your washer? This cup holds and meters bleach during wash cycles. Simple snap-in installation, video included.
Replaced top ring and removed inner drum to remove pieces that were broken. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.