Whirlpool Filter

This is a set of two charcoal filters designed for a range hood operating in recirculating (non-vented) mode. The charcoal absorbs odors and smoke from cooking before the air is recirculated back into the kitchen. Replace these filters if you notice lingering cooking odors, reduced air freshening performance, or if they have been in use for six months or longer.

Secures and seals your refrigerator's water filter. Replace if cracked, leaking, or filter won't seat properly. Confirm fit with your model number.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-7/16" x 7-1/2" x 3/32" (5.4375 x 7.5 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

Carbon filter for range hoods and over-the-range microwaves. Dimensions: 5-5/16" x 12" x 3/8" (5.3125 x 12 x 0.375). Rectangle shape. Removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Lint filter catches fluff and debris before it escapes the dryer vent. Replace when clogged or damaged to maintain airflow and prevent blockages.

This is an aluminum mesh grease filter designed to trap grease and airborne cooking particles as air passes through the range hood. It helps protect the hood's internal components and ductwork from grease buildup. Replace this filter if it is visibly clogged with grease, bent, or damaged, or if you notice reduced airflow and lingering cooking odors.

Charcoal filter kit removes cooking odors and grease from recirculating range hoods. Replace when odors persist or airflow weakens. Confirm fit by model.

Grease and odor filter for range hoods and over-the-range microwaves. Dimensions: 8-3/4" x 10-1/2" x 7/16" (8.75 x 10.5 x 0.4375). Rectangle shape. Captures grease and removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Captures airborne grease and cooking particles to protect your range hood blower and maintain effective ventilation. Replace when clogged or damaged.

Captures lint and debris during drying cycles. Replace when torn, damaged, or clogged despite cleaning. Confirm compatibility with your model number.

Traps lint and debris during drying to prevent duct clogs and maintain efficiency. Replace when torn, warped, or clogged. Verify fit with your model.

In-line filter installs behind refrigerators without built-in filtration. Reduces contaminants for clean, fresh water. Replace every 6 months.

This factory replacement filter helps protect your appliance by trapping unwanted debris and contaminants so the system can perform as designed. Replace a damaged or clogged filter to restore proper flow and dependable operation. What it does

• Screens particles to protect internal components and maintain airflow or water flow
• Helps sustain performance and reduce wear on the appliance
• Common signs it's time to replace: reduced flow/venting, lingering odors, or visible damage
• Preventive replacement can help maintain efficiency over time

• 1 filter

• Disconnect power to the appliance; shut off water supply if applicable
• Access and remove the old filter, noting orientation and seals
• Install the new filter fully seated; do not overtighten any fasteners or fittings
• Restore power (and water, if used) and check for proper operation and leaks/airflow

Filters debris from water to protect pump and spray arms. Replace if you notice slow drainage, poor cleaning, or water left in tub. Verify fit by model.

Traps grease and airborne particles from your cooktop's exhaust system. Replace when clogged or damaged to maintain proper ventilation. Verify fit.

Fine mesh screen filter sits in the dishwasher sump to trap food particles and debris, protecting the pump and wash system. Replace when clogged or damaged. Confirm fit with your model number.