Whirlpool Parts

This factory replacement filter helps protect your appliance's internal systems by capturing debris and contaminants, maintaining proper flow and performance. Replacing a damaged or clogged filter can help restore efficiency and prevent avoidable wear.

• Screens particles from the air or water stream to safeguard internal components
• Helps reduce buildup that can lead to odors, residue, or restricted flow/airflow
• Replace if torn, warped, broken, or persistently clogged
• Common symptoms include reduced performance, unusual noises, residue buildup, or poor circulation

• Disconnect power (and shut off water supply if applicable) before servicing
• Access and removal method varies by model; note orientation and locking tabs or latches
• Do not force the filter; align and seat fully to ensure a proper seal
• Never operate the appliance without all required filters in place; refer to your model's user guide for specifics

This replacement air filter helps reduce odors and keeps the refrigerator interior smelling fresher by filtering refrigerator air circulation. It installs in the cabinet air path and is a direct-fit replacement when specified by your model. What it does:

• Traps and helps reduce common food and household odors in the refrigerator compartment
• Helps maintain fresher-smelling interior air, improving overall storage conditions
• Restores designed air circulation where a clogged or missing filter causes noticeable odors
• Simple passive filtration—no electrical connection or electronics

• Install in the designated refrigerator cabinet/filter slot per the owner's manual; orientation may matter
• Remove old filter and dispose of properly before installing the new filter
• Use gloves if desired; avoid forcing the filter into place to prevent damage

The Filter is an OEM part for Whirlpool cooktops. This part is responsible for trapping grease and other airborne particles, ensuring that your kitchen remains clean and free from unwanted odors during cooking. It effectively captures grease and prevents it from accumulating in the exhaust system.

A bad grease filter can occur due to clogging, damage, or excessive wear. If you notice symptoms such as poor ventilation, persistent cooking odors, or visible grease buildup in the downdraft vent, it may be time to replace the worn-out or clogged grease filter with this genuine OEM part.

Symptoms of a bad grease filter include:

• Poor ventilation and airflow
• Lingering cooking odors
• Visible grease accumulation in the downdraft vent

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This refrigerator water filter cartridge replaces the installed filter to help restore clear, better-tasting water and improve ice quality. It's a direct-fit replacement designed for compatible Whirlpool refrigeration systems. What it does:

• Filters water to reduce common impurities that can affect taste and clarity
• Helps improve the quality of ice produced by the refrigerator
• Can resolve symptoms like cloudy water, off-taste, or reduced water flow from the dispenser
• Restores proper filtration performance when the original filter is expired or clogged

• Follow the refrigerator manufacturer's instructions for removal and installation.
• Run and discard the recommended amount of water after installation to flush the system before use.
• Turn off the water supply and disconnect power if required by your model before servicing.
• Inspect the new filter for damage; do not use a damaged filter.

A replacement refrigerator water filter cartridge that helps reduce common tap-water tastes and odors for cleaner-tasting water and ice. Fits front-access filter housings; designed as a service replacement to restore filtered water performance. What it does

• Removes or reduces common contaminants that affect taste and odor, improving drinking water and ice quality
• Restores proper water flow through the refrigerator's filter housing when a clogged or old filter causes slow flow
• Helps reduce visible particles and sediment that may appear in dispenser water or ice
• Appropriate when water tastes or smells off, ice has an unusual taste, or water flow from the dispenser is weak

• One refrigerator water filter cartridge (single replacement)

• Replace with the refrigerator powered off or water supply shut off if recommended by your appliance manual
• Follow the refrigerator manufacturer's installation steps: push-twist or insert-and-lock depending on housing style
• After installation, flush several gallons of water through the dispenser to clear air and carbon fines
• Dispose of used filter according to local regulations

This refrigerator water filter replaces your fridge's internal filtration cartridge to help restore clear, better-tasting drinking water and ice. Simple to swap, it helps maintain household water quality when performance declines. What it does:

• Traps sediment and particulates to improve water clarity
• Reduces chlorine taste and odor for fresher-tasting water and ice
• Helps prevent scale and particulates from reaching dispenser and ice maker
• Common symptoms: cloudy or bad-tasting water, off-odors, or reduced water flow from dispenser

• Turn off the water supply and follow the refrigerator manufacturer's removal instructions before replacing the filter.
• Push/turn or slide new filter into the filter housing until it seats; follow OEM instructions for your model.
• After installation, flush several quarts of water through the dispenser to clear air and any loose carbon residue.
• Replace at recommended intervals and discard used filters per local regulations; do not use with water that is microbiologically unsafe without adequate disinfection.

This noise filter reduces electrical interference on the appliance's power line to help prevent buzzing, humming or intermittent operation caused by electrical noise. It restores quieter, more reliable performance when the filter is the worn component. What it does:

• Suppresses electrical noise and interference on the appliance power line
• Helps reduce audible buzzing, humming or intermittent electronic behavior
• Protects sensitive control electronics from stray electrical transients
• Restores normal operation when a damaged filter is the root cause

• Disconnect power before servicing to avoid shock hazard
• Handle and mount the filter per OEM orientation; secure connections firmly

This Whirlpool Water Filter Housing is an OEM part for specific Whirlpool refrigerator models. It plays a role in accommodating the water filter, ensuring clean and safe drinking water is dispensed from your fridge. 

A faulty housing may lead to water leaks, improper filter fitting, or reduced effectiveness in water filtration, affecting the quality of the water dispensed.

Symptoms of a bad water filter housing include:

• Leaking water near the filter area.
• Difficulty in installing or removing the water filter.
• Unusual noise or vibration when the water dispenser is used.
• The water filter does not lock in place securely.
• Noticeable decrease in water flow from the dispenser.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This replacement screen is a protective mesh that helps keep debris out of the appliance's internal flow pathways and components. It restores proper screening to prevent clogging and helps maintain reliable operation. What it does

• Catches lint, rust, scale, and other debris before it reaches valves, pumps, or sensors
• Helps maintain proper water/air flow to reduce service issues caused by blockages
• Protects internal components from premature wear due to particulate contamination
• Can help resolve symptoms like reduced flow, intermittent operation, or debris-related errors

• One replacement screen

• For safety, disconnect power (and water if applicable) before starting work
• Access and removal steps vary by model—refer to your service manual for exact disassembly
• Inspect mating seals or housings; replace any damaged parts to ensure a proper fit

This genuine-style refrigerator water filter cartridge replaces the inline filter that removes common taste and odor issues from your fridge's water and ice dispenser. It helps restore clearer, better-tasting water for drinking and ice-making. What it does

• Filters sediment and common contaminants that can cause cloudy water or unusual taste or odor.
• Helps improve the quality of water used for drinking and ice production.
• Restores normal water flow and dispenser performance when a clogged filter causes slow dispensing.
• Works as the direct replacement filter cartridge for the factory filter assembly.

• Turn off the water supply or follow your refrigerator's shutdown steps before removing the old filter.
• Remove the old filter per the refrigerator manufacturer's instructions and install the new cartridge until it seats securely.
• After installing, run the water dispenser until the water runs clear to flush the system.
• If you smell or see discoloration after installing, re-seat the filter and repeat flushing.

This is a 2 pack. Color: metallic. Size: 5-3/4 inches x 10-3/4 inches.

This Lint Screen is an OEM part compatible with Whirlpool dryers. Designed specifically for Whirlpool models, this lint screen effectively captures lint and debris during the drying cycle, ensuring your dryer operates efficiently and safely. Its fine mesh construction is optimized for trapping even the smallest particles without obstructing airflow. 

A lint screen can become faulty due to wear and tear, overloading of the dryer, or improper maintenance. Accumulated lint or damage to the screen can reduce its effectiveness, potentially leading to longer drying times and increased energy consumption. 

Symptoms of a bad lint screen include:

• Reduced drying efficiency.
• Excessive lint accumulation on clothes.
• Longer than usual drying times.
• Unusual noises during the drying cycle.
• Visible damage or wear on the screen.

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
 

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation