Whirlpool Handle

Replace a cracked or loose door handle with this factory-fit handle for select dishwashers. It restores a secure grip for opening and closing the door and refreshes the front appearance.

• Provides the handhold needed to open and close the dishwasher door
• Direct replacement for a broken, cracked, loose, or missing handle
• Helps correct a wobbly or unstable grip point on the door
• Refreshes the look of the appliance front panel

• Disconnect power at the breaker before servicing the door
• Open the door and access the handle's mounting screws from the inside; support the handle while removing hardware
• Transfer and reuse existing screws or end caps if your model uses them
• Tighten evenly; check door operation before restoring power

Color: Stainless)

This pocket-style door handle provides the recessed grip used to open and close the appliance door. Replacing a cracked or missing handle restores a clean look and a secure, comfortable grasp for everyday use. What it does:

• Provides a built-in finger pocket for reliably opening and closing the door
• Replaces a broken, cracked, loose, or missing handle
• Helps resolve difficulty gripping the door or sharp/rough edges from damage
• Maintains proper look and prevents stress on adjacent trim or panels

• 1 pocket-style door handle

• Disconnect power to the appliance before servicing.
• Open the door and remove the screws/clips retaining the old handle; note orientation and placement.
• Reuse the existing fasteners/brackets as required and align the new handle carefully.
• Tighten fasteners snugly without overtightening; verify smooth door operation.

Color: White

Color: Black. For white order W10295692. For stainless order W10272107.

This black oven door handle restores a secure grip and clean look to your appliance. Replace a cracked, loose, or missing handle to safely open and close the oven door.

• Provides the handhold used to open and close the oven door
• Replaces damaged or missing handle to restore normal operation
• Helps address a loose, wobbly, or sagging handle
• Refreshes the door's appearance when the old handle is scuffed or broken

• Disconnect power at the breaker; for gas units, shut off gas. Allow the oven to cool completely.
• Remove the door or inner panel per your model's manual to access the handle mounting screws.
• Support the outer glass/trim while removing and installing hardware to prevent damage.
• Tighten mounting screws evenly and verify smooth door operation before use.

This handle assembly attaches to the storage drawer on a laundry pedestal, providing a solid, comfortable grip. Replace a cracked, loose, or missing handle to restore smooth drawer operation and the pedestal's original, finished appearance.

• Mounts to the pedestal drawer front and serves as the user pull
• Helps ensure consistent, easy opening and closing of the storage drawer
• Typical failure symptoms: cracked or broken handle, loose handle, difficulty opening the drawer
• Restores proper fit and appearance after damage or wear

• Disconnect power and remove drawer contents before beginning
• Remove the drawer to access the handle fasteners; place it on a protected surface
• Remove fasteners, align the new handle, and secure; reuse existing hardware if in good condition
• Test drawer operation and avoid overtightening screws

This is a white replacement handle assembly that restores a solid, comfortable grip and fresh appearance to your appliance. Use it to replace a cracked, loose, or missing handle so doors or drawers open and close smoothly.

• Provides the rigid handhold used to open and close the appliance door or drawer
• Helps resolve a loose, broken, or missing handle
• Can improve operation when the door is hard to open due to a damaged handle
• Refreshes the look of the appliance after cosmetic wear or discoloration

• Disconnect power before servicing
• Open the door to access mounting fasteners; retain and reuse original screws and any trim caps
• Transfer any spacers or brackets from the old handle to the new one
• Align carefully and tighten fasteners evenly—do not overtighten

The Dryer Door Handle is an OEM replacement part for Whirlpool dryers. A dryer door handle can deteriorate due to prolonged use, repeated force when opening or closing the door, or accidental impact that causes cracks or breakage. These factors may compromise the handle's structural integrity and make it less reliable.

Color: White

Symptoms of a bad Dryer Door Handle include:

• Loose or wobbly handle
• Cracks or visible damage to the handle
• Difficulty opening or closing the dryer door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

The Fridge Handle is an OEM part for Whirlpool refrigerators. This handle is essential for opening and closing the refrigerator door, providing a sturdy and comfortable grip. The handle measures 20 inches in length. Please note that this item does not come with screws for installation. This means you may need to use the existing screws or obtain suitable replacements separately.

You should replace the fridge handle if it becomes damaged or loose. Causes of a bad handle can include wear and tear from regular use, accidental impacts that cause cracks or breaks, or the loosening of attachment screws over time. A compromised handle can make it difficult to open the refrigerator door and may even pose a safety risk.

Symptoms of a bad Fridge Handle include:

• The handle feeling loose or wobbly
• Cracks or breaks in the handle
• Difficulty in opening or closing the refrigerator door
• The handle detaching from the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Dark grey used on pewter models. For light grey order WP8181846. For blue order 8181877. For bisque order 8182081. Fits front load Whirlpool/Kenmore made washers. Genuine Whirlpool part.

Color: Black

This white handle mounts to your appliance and provides a secure, comfortable grip for everyday use. Replace a cracked or loose handle to restore smooth operation and bring back a clean, factory look. What it does:

• Attaches to the door or drawer front and serves as the pull point for opening and closing
• Helps resolve issues like a cracked/broken or wobbly/missing handle
• Improves ease of use when the handle no longer secures properly
• Refreshes worn or discolored exterior appearance with a matching OEM-style finish

• One handle in white

• Disconnect power to the appliance before servicing; turn off gas if applicable
• Access and remove the fasteners securing the old handle, noting their location/orientation
• Align the new handle; transfer and reuse existing screws, spacers, or end caps as required by your model
• Start all fasteners by hand, tighten evenly, and verify secure fit and smooth operation

This black oven door handle replaces a cracked, loose, or missing handle and restores a secure, comfortable grip on your range. It matches the original finish and helps keep the door easy to open and close.

• Provides a sturdy handhold for opening and closing the oven door
• Replaces a handle that is cracked, broken, loose, or missing
• Helps eliminate wobble and improves door control
• Refreshes the appliance's appearance with a matching black finish

• Disconnect power and allow the oven to cool completely before servicing.
• Support the door and glass while removing inner trim screws to access the handle fasteners.
• Transfer existing end caps/mounting hardware from the old handle; align the new handle and tighten screws snugly—do not overtighten.
• Reassemble and check that the handle is secure before use.

Restore a solid, comfortable grip on your freezer door with this black Freezer Door Handle. It replaces a damaged or worn handle to bring back dependable daily use and a clean, factory look.

• Provides a sturdy handhold for opening and closing the freezer door
• Direct replacement for a cracked, broken, loose, or missing handle
• Refreshes the appliance's appearance if the old handle is scuffed or discolored
• Installs on the existing mounting points for your model

• Unplug the appliance and secure the door before service.
• Access and loosen the handle's set screws or mounting screws, then remove the old handle.
• Position the new handle; transfer and tighten existing fasteners evenly—do not overtighten.
• Verify smooth door operation and alignment after installation.