Whirlpool Handle

This commercial-style handle restores a solid, comfortable grip on your appliance door or drawer. Replacing a broken or loose handle keeps everyday opening and closing smooth while maintaining the original factory fit and appearance.

• Provides a sturdy pull point to open and close the door or drawer
• Replaces cracked, broken, stripped, or missing handle assemblies
• Can resolve a loose or wobbly handle that won't stay tight
• Maintains correct fit when installed with the proper mounting hardware

• Disconnect power to the appliance before starting.
• Protect the panel/door surface with tape or a cloth while working.
• Reuse original mounting screws, set screws, or spacers unless damaged.
• Tighten mounting fasteners evenly; do not overtighten to avoid damage.

The Door handle assembly is an OEM part for Whirlpool ranges. It is a component that includes both the door handle for convenient access, as well as the vent responsible for safely removing heat, smoke, and odors from the oven cavity.

Causes of a bad door handle and vent assembly can include wear from continuous use, heat exposure warping plastic components, or damage from impacts over time. Grease and food debris buildup can also deteriorate vent fan motors and air channels.

Symptoms of a bad assembly include:

• Difficulty opening or closing the oven door
• Excessive smoke or burned food smells
• The vent fan not operating or exhausting properly
• Internal components like springs or bearings becoming loose

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement screw fastens appliance panels and components securely. Replace a missing, stripped, or corroded original to restore a tight fit and help prevent rattling, vibration, and gradual loosening of assemblies.

• Secures panels, brackets, and internal assemblies to the frame
• Replaces damaged or missing hardware to maintain proper fit
• Helps reduce vibration, noise, and movement caused by loose parts
• Supports correct alignment at the original mounting points

• Disconnect power and shut off water or gas before service.
• Match the original screw's location and length; replace one at a time if needed.
• Use the correct driver/bit and avoid overtightening to prevent stripping plastic or metal.
• Reuse any washers or clips only if in good condition.

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It is a component that facilitates easy access to the fresh food and freezer compartments. The handle interfaces directly with users to open and close refrigerator doors.

Causes of a bad door handle can include wear and tear over time from repeated use, or damage such as cracks, chips or breaks from accidental impact. Temperature fluctuations from frequent door openings can also cause handles to warp or fail prematurely.

Symptoms of a bad refrigerator door handle include:

• Difficulty opening or closing the refrigerator door
• The door not latching securely
• Internal components like springs or cables becoming loose or worn

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Handle is an OEM part for Whirlpool refrigerators. This sturdy handle serves as a convenient way to open and close the doors of your appliance. The door handle offers a comfortable grip and provides an easy way to access your refrigerator and freezer compartments. 

A bad door handle can occur due to excessive force, accidental impacts, or simply regular use over time. If you notice symptoms such as a loose or wobbly handle, difficulty in opening or closing the doors, or visible cracks or damage, it may be time to replace this part.

Symptoms of a bad door handle include:

• Loose or wobbly handle
• Difficulty in opening or closing the doors
• Visible cracks or damage

Restore your Whirlpool refrigerator by replacing the worn or damaged door handle with this genuine OEM part.

This OEM part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Color: White

This genuine replacement handle restores a secure grip and the finished look of your appliance door. Designed to replace damaged or worn handles so you can open and close the door safely and comfortably. What it does:

• Provides a secure, ergonomic grip to open and close the appliance door
• Replaces cracked, loose, or broken handles that cause slipping or poor fit
• Covers and protects the door mounting area for a finished appearance
• Restores normal door operation and user safety when the original handle is damaged

• Disconnect power to the appliance before beginning any work.
• Use basic hand tools to remove the old handle and fasten the replacement; keep fasteners snug but do not overtighten.
• Retain removed fasteners and any trim pieces for reassembly.

The Dispenser Drawer Handle is an OEM part specifically designed for Whirlpool washing machines. It controls detergent dispensing for optimized cycles.

Symptoms of a faulty drawer handle include: 

• Inability to open the dispenser drawer for addition of detergent  
• The handle mechanism sticking or failing to engage the latch
• Premature wear frustrating normal operation 

Over many years of opening and closing, physical stresses can deform or compromise handle workings. Small cracks reduce latched security.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This replacement door handle restores a secure grip and proper opening for the appliance door. It matches the original fit and finish to keep the door easy to open and the exterior looking right. What it does:

• Replaces a broken, cracked or loose door handle to restore safe, reliable opening
• Provides the original-style grip and alignment for normal door operation
• Helps prevent items from dropping when opening or closing the door
• Matches the appliance's exterior for a clean, factory appearance

• One replacement door handle

• Intended for users comfortable with basic appliance repairs; disconnect power if working near electrical components
• May require removing trim or end caps; retain original fasteners if reusing
• Use proper-size screwdriver or socket to avoid stripping hardware

This replacement oven door handle restores a secure grip for opening and closing the oven door. It replaces a damaged, loose, or missing handle to make door use safer and more convenient. What it does:

• Provides a sturdy grip for opening and closing the oven door
• Replaces handles that are cracked, bent, loose, or missing
• Helps prevent slippage and improves user control when handling hot appliances
• Matches the original mounting style for a straightforward replacement

• Use basic hand tools; support the door while removing and installing the handle to avoid injury or damage
• Disconnect power to the appliance or ensure it is cool before attempting replacement
• Tighten mounting fasteners securely but do not overtighten to avoid stripping