Whirlpool Handle

Color: Stainless. For black order W10246505. For white order W10295692.

Color: Black. For white order W10295692. For stainless order W10272107.

This stainless-finish door handle restores a solid, comfortable grip for opening and closing the appliance door. Replace a cracked, loose, or worn handle to keep the door operating safely while maintaining a matching stainless appearance.

• Provides a secure handhold to open and close the door
• Restores safe, reliable access when the original handle is cracked, loose, or missing
• Matches stainless-finish appliances for a consistent look
• Common signs: wobbling handle, broken mounting points, difficulty opening the door

• Disconnect power before servicing; allow any hot surfaces to cool
• Access the handle mounting screws; on many models, the inner door panel or trim must be removed
• Transfer any end caps, spacers, or trim from the original handle if required
• Tighten screws evenly and verify alignment and proper door operation after installation

This black refrigerator container handle replaces a worn, cracked, or missing pull on an interior bin or drawer. It restores a secure grip so you can easily slide the container in and out on compatible models.

• Attaches to the front of a refrigerator container or its cover to provide a solid handhold
• Replaces cracked, loose, or missing handle pieces
• Helps bins open and close smoothly without stressing the cover/front
• Common symptoms: handle broken or missing, tabs snapped, handle won't stay attached, drawer hard to pull

• Remove the bin/drawer and place the cover or front on a flat, protected surface
• Release the old handle by removing screws or disengaging tabs/clips (varies by model); keep hardware for reuse
• Align the new handle and snap or screw it into place; do not overtighten
• Handle glass and plastic parts carefully; wearing cut-resistant gloves is recommended

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

Replacement door handle that restores a secure grip and smooth opening for compatible Whirlpool appliances. Designed to match factory fit and mounting locations to replace cracked, loose, or damaged handles. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces cracked, broken, bent, or loose handles that interfere with normal use.
• Matches factory mounting points for a secure, stable replacement.
• Restores function and helps prevent further wear around the door edge.

• Typical installation uses common hand tools (screwdriver or hex driver); follow manufacturer diagrams for correct orientation.
• Disconnect power or unplug the appliance before working near electrical components or sealed areas.
• Align handle over mounting posts, install fasteners securely, and avoid overtightening to prevent damage.

This door catch and strike work together to keep the door securely closed and engage the safety interlock switch. Replacing worn pieces restores a firm latch and reliable operation when the door is properly shut.

• Aligns and engages the latch so the door stays closed during operation
• Activates the door switch so cycles can start
• Helps prevent the door from popping open mid-cycle
• Common symptoms: door won't latch without force, unit won't start, visible wear or a bent strike

• Disconnect power to the appliance before servicing
• Open the door and remove mounting fasteners to swap the catch and strike
• Adjust strike alignment/depth so the latch engages fully and the door sits flush
• Restore power and test for smooth closing and proper cycle start

Replace a cracked or loose door handle and restore a secure, comfortable grip for opening and closing the appliance door. This direct replacement helps bring back smooth operation and a clean, factory look. What it does:

• Provides the gripping surface to open and close the door
• Restores safe handling when the original handle is cracked or loose
• Helps maintain proper door operation and appearance
• Common symptoms: broken or missing handle, wobbling/loose handle, difficulty opening the door, cosmetic damage

• 1 door handle

• Disconnect power to the appliance before servicing
• Access and remove the handle's mounting screws (often from the inner door panel or under trim)
• Transfer any spacers/end caps/screws from the old handle as required for your model
• Tighten mounting screws securely but do not overtighten; verify door alignment and operation

This door latch assembly secures the appliance door and engages the door switch so cycles start and run normally. It replaces a worn or broken latch to restore reliable door closure and operation. What it does

• Secures and holds the door closed during operation so the appliance can run
• Engages the door switch/lock circuit to allow the control to start cycles
• Prevents the door from opening mid-cycle, improving safety and performance
• Common symptom fix: door won't stay closed, won't latch, or appliance won't start

• Disconnect power (and water, if applicable) before beginning any work
• Removal of the outer door or access panel may be required for replacement
• Handle plastic clips and mounts carefully to avoid breakage during installation

Color: Black

This replacement door handle restores a solid, comfortable grip for opening and closing the refrigerator door. It replaces cracked, broken or loose handles so the door operates safely and reliably. What it does:

• Provides a secure gripping surface to open and close the refrigerator door
• Replaces cracked, broken or missing handles that make the door hard to use
• Restores proper engagement with the door hardware for reliable operation
• Helps prevent accidental drops or further damage from a failing handle

• Disconnect power to the appliance or unplug the refrigerator before starting any work
• Remove any trim or end caps to access mounting screws; retain original hardware unless stated otherwise
• Hand-tighten mounting screws, then snug—do not overtighten to avoid cracking the handle

This replacement door handle restores a secure, comfortable grip for opening and closing your refrigerator or freezer door. It replaces a cracked, broken, or loose handle to improve safety and daily use. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, broken, or loose handles that can catch or pinch
• Helps prevent further damage to door trim from continued use of a damaged handle
• Restores normal operation and appearance to the appliance front

• Disconnect power to the appliance or unplug before starting any work to avoid injury
• Remove any food and clear workspace around the door for easier access
• Minor disassembly of the door trim or end cap may be required; retain all fasteners
• Follow the manufacturer's instructions for correct torque and alignment

This genuine replacement door handle restores a secure grip and smooth opening for your appliance door. It replaces damaged, cracked or loose handles so you can open and close the door safely and comfortably. What it does:

• Provides a firm, ergonomically-shaped grip for opening and closing the appliance door
• Replaces broken, cracked or loose handles that no longer secure properly
• Restores normal operation and reduces risk of the door slipping from your hand
• Matches OEM fit and mounting points for a direct replacement

• One replacement door handle

• Disconnect power (and water for refrigerators with dispenser) before servicing the appliance
• Remove any trim or access panels per your appliance service instructions to access mounting screws
• Align handle with mounting points, secure with original hardware; do not overtighten to avoid cracking

This stainless steel door handle restores a damaged or worn handle to bring back a secure grip and the refrigerator's finished look. It's a direct replacement designed for the matching Whirlpool appliance series. What it does:

• Replaces cracked, bent, loose or cosmetically damaged door handles
• Provides a solid grip to open and close the door reliably
• Restores the appliance's stainless finish for a consistent appearance
• Matches OEM fit and mounting points when installed correctly

• One stainless steel replacement door handle

• Support the door while removing/installing the handle to avoid damage or injury
• Some installations require removing the door trim or top hinge screws—use common hand tools
• Do not overtighten fasteners; thread engagement should be secure but not forced

This replacement door handle restores a secure, easy-to-grip opening surface for your appliance, improving usability and appearance after the original handle cracks, breaks, or comes loose. What it does

• Replaces a cracked, broken, or loose door handle to restore safe opening and closing
• Provides a solid grip so the door operates smoothly and securely
• Helps prevent damage to the door finish from makeshift grips or tools
• Matches OEM fit form for straightforward reattachment when correct part is used

• One replacement handle

• Remove any power source only if manual access requires it; most handle swaps are done with the appliance off and doors empty
• Use the correct fasteners and do not overtighten screws to avoid cracking the handle or distorting the door
• If the handle attaches to a trim or bracket, keep track of small clips, screws, and spacers for reassembly