Whirlpool Touch Pad

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power

Color: Black

The User Control and Display Console is an OEM part for Whirlpool washing machines. It houses the digital display and membrane buttons that allow for cycle and setting selection. As the interface constantly subjected to touch during use, this console can show normal wear like faded graphics or non-responsive buttons over time.

Causes may include extended use wear from repeated cycling as well as occasional moisture exposure inside the console.

Symptoms of a faulty console include:

• Cycle or temperature buttons not responding
• Unreadable or blank display screen
• Inability to scroll through options

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Console assembly replaces the appliance's front control panel, restoring a secure housing for the buttons and user interface so you can operate the machine reliably and protect internal electronics. What it does:

• Houses the user controls, button pads and display and provides the mounting location for the control board.
• Replaces cracked, broken or faded panels that make buttons hard to use.
• Addresses symptoms such as missing, sticky or hard-to-press buttons and visible console damage.
• Protects internal electronics from dust and impact while keeping controls accessible.

• Disconnect power to the appliance before beginning work to avoid electric shock.
• Follow the OEM service manual for disassembly and reassembly steps; console removal typically requires removing trim and fasteners.
• Handle display ribbons, connectors and the control board with care to avoid damage.

This is the adhesive label that covers your appliance's console. It restores clear, durable button and cycle markings so you can easily read and select settings while refreshing the look of the control panel.

• Adheres to the console to display cycle and option labels
• Helps protect the keypad surface from everyday wear
• Common symptoms: peeling or bubbling film, faded/illegible text, cracks, or lifting edges
• Cosmetic/labeling part that improves readability of the controls

• Disconnect power before servicing
• Remove the old overlay and clean the console surface of residue
• Carefully align with the console/keypad openings; once pressed down, it cannot be repositioned
• Apply pressure from center outward to ensure full adhesion

This electronic control board manages the dishwasher's settings and cycle operations, restoring responsive touch controls and reliable cycle sequencing so dishes are cleaned on the selected program. Replaces a failed or unresponsive console control module. What it does:

• Interprets user inputs and runs the dishwasher's programmed cycles.
• Controls timing, wash/dry functions, and interface feedback.
• Common symptom: touchpad or display unresponsive or erratic behavior.
• Common symptom: cycles fail to start, stop mid-cycle, or show error codes tied to control faults.

• One electronic control board (W10757829).

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the board by edges to avoid ESD damage; use anti-static precautions if available.
• Some models require removing the control panel or inner door trim to access the board.

This dispenser facade replaces the outer trim pieces around your refrigerator's ice and water dispenser, restoring appearance and proper fit for smooth operation and sealing. It's a direct-fit cosmetic and protective assembly. What it does:

• Covers and protects the dispenser opening and controls from damage and debris
• Provides a finished look and helps direct water/ice into the cup
• Restores proper alignment when cracked, warped, or broken facade causes interference
• Helps prevent drafts and minor water splash at the dispenser area

• Disconnect power and shut off water to the appliance before servicing
• Many installations require removing the dispenser bezel and releasing snap-clips or screws; save hardware for reinstallation
• Handle plastic trim carefully to avoid scratches; use a soft pad when setting parts down

This dispenser trim is the exterior bezel that finishes the refrigerator dispenser opening, restoring a clean appearance and helping align the dispenser components for smooth operation. What it does:

• Covers and protects the dispenser opening from scratches and wear
• Helps position the dispenser controls and chute for reliable use
• Prevents debris from entering behind the dispenser assembly
• Commonly replaced when the bezel is cracked, chipped, or loose

• One dispenser trim piece as shown

• Disconnect power to the appliance before beginning service
• Remove any clips or screws holding the existing trim and lift the old bezel away carefully
• Align the new trim and secure with the original fasteners; avoid overtightening

This console assembly is the appliance's user control panel that houses the display and touch/button interface, restoring normal control and feedback when the original console is damaged or unresponsive. What it does

• Replaces a damaged or cracked front control console so buttons and the display can be used reliably
• Restores responsive button/touch input when controls become unresponsive or sticky
• Fixes issues where the display is dim, unreadable, or not showing feedback from selections
• Helps resolve intermittent control behavior tied to a failed console interface

• One control panel (console assembly)

• Disconnect power to the appliance before beginning any repair to avoid shock
• Removal typically requires access to the appliance console and disconnecting the wiring harness; save all screws and fasteners
• Handle the new console carefully to avoid damage to the display or control surfaces

This separator is a molded plastic divider that helps keep ice organized inside the ice bin for smoother dispensing and less clumping. It restores proper spacing so ice moves freely during dispense cycles. What it does:

• Divides and guides ice inside the ice bin to reduce jamming and clumping
• Helps improve ice feed into the auger or dispenser chute
• Reduces shifting and rattling of ice during door movement
• Restores intended bin geometry after a cracked or missing divider

• One separator

• Unplug the refrigerator or shut off power before working on the ice bin or dispenser
• Empty the ice bin and remove any loose ice to avoid spills during replacement
• Snap the separator into the molded slots in the ice bin; no tools typically required

This white membrane assembly is the thin keypad/overlay that sits on the appliance control console, restoring tactile button response and sealing the control area from spills and debris. What it does:

• Replaces a worn or damaged keypad membrane so buttons register presses reliably
• Helps restore control panel functionality when buttons are sticky or unresponsive
• Protects the underlying electronics from light moisture and dirt
• Maintains correct alignment and spacing for the console buttons

• One white membrane assembly

• Disconnect power to the appliance before beginning any work
• Remove the console or control housing to access the old membrane; handle the new membrane gently to avoid creases or damage
• Align the membrane carefully with the button openings and the PCB; avoid touching circuit contacts with bare hands
• Reassemble the console and test button operation before finishing; if controls still do not respond, the underlying switch/PCB is functional

This dispenser trim is the exterior bezel that surrounds a refrigerator's ice/water dispenser, restoring a finished appearance and protecting internal dispenser components from daily wear. It replaces cracked, chipped, or faded trim pieces. What it does:

• Provides a finished, protective bezel around the dispenser opening
• Helps keep the dispenser area aligned and prevents gaps that trap dirt or moisture
• Commonly replaced when trim is cracked, broken, loose, or cosmetically damaged
• Restores proper fit and appearance after impact or wear

• Disconnect power to the appliance before starting work; shut off the water supply if the dispenser is connected to plumbing
• Installation typically requires removing the inner dispenser panel or door trim; keep track of all fasteners
• Handle edges carefully — trim pieces or adjacent metal can be sharp