Cooktop Knob, Dial & Button

Replace a cracked, broken, or missing control knob on your electric range. This knob installs on the control panel for selecting cooking settings.

Black plastic control knob with stainless trim for range hood switch. Restores secure grip and function when original knob is cracked, stripped, or missing.

This burner valve knob replaces a worn or missing surface burner control so you can turn the gas on/off and set flame levels precisely. It restores smooth, secure control of your cooktop's surface burners.

• Mounts to the surface burner valve stem to control gas flow and flame height
• Restores accurate turning and feel when the original knob is cracked, stripped, or loose
• Common symptoms: knob falls off, won't engage the stem, hard to adjust flame, missing knob
• Helps ensure the burner reliably turns fully Off and adjusts smoothly through settings

• Turn all controls OFF and allow the cooktop to cool before servicing
• Unplug or disconnect power to the range for safety
• Pull the old knob straight off; align the new knob with the valve stem (match the flat/D-shaped side) and push straight on—do not force
• Confirm smooth operation and proper Off alignment after installation

Replace a cracked, stripped, loose, or missing surface burner control knob on your range. Attaches to the valve stem to restore secure grip and control.

Black control knob for range temperature adjustment. Replaces cracked, broken, or missing knobs on cooktop surface. Attaches to infinite switch stem.

Black surface burner control knob attaches to the valve stem on your range or cooktop. Replace a cracked, broken, or missing knob to restore control.

Black control knob for cooktop burners. Attaches to valve stem to control ignition and flame adjustment. Replaces worn, cracked, or broken knobs.

White thermostat control knob for gas and electric ranges. Replaces worn, cracked, or broken temperature selector knobs. Includes metal insert for secure fit.

This surface burner knob replaces a worn or missing control knob on your gas cooktop or range, restoring precise flame adjustment and a clean, finished look. It fits onto the burner valve stem for smooth, reliable operation.

• Turns the surface burner valve to control flame level from low to high
• Common fix for knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps when burner heat is difficult to set or won't hold steady
• Restores consistent, easy-to-grip control of the burner

• Turn off power and ensure all burners are cool before starting; shut off gas supply if working near the control area
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the new knob with the stem orientation and press firmly until fully seated
• Test burner operation to confirm smooth adjustment through the full range

Replacement control knob for ranges and cooktops. Installs on the control shaft to adjust burner or oven settings. Needed when original is cracked, worn, or missing.

Replace your worn, cracked, or missing cooktop control knob. Attaches to the control shaft for secure fit and clear heat setting selection.

Replacement control knob for electric range. Installs on splined stems. Needed when original knob is cracked, broken, worn, or missing. Restores grip.

Replacement knob bezel for gas cooktops. Sits behind burner control knobs as a decorative base. Replace if cracked, broken, or missing from wear.

Surface burner control knob for gas cooktops/ranges with a black stainless finish. Replaces a worn or broken knob to restore smooth, accurate flame adjustment and a clean, factory look.

• Mounts on the burner valve stem to turn gas on/off and set flame level
• Common symptoms: cracked or stripped hub, loose knob, missing/faded markings, knob won't stay on
• Direct push-on replacement; no tools typically required for the knob swap
• Black stainless finish matches coordinating appliances

• Disconnect power and ensure all burners are cool before servicing
• Pull the old knob straight off the valve stem; avoid twisting or prying on the stem
• Align the new knob with the stem and press straight on until fully seated
• Verify smooth rotation and correct pointer alignment before use

Replacement control knob that restores reliable turning and selection on your appliance. Provides a secure grip and clear tactile feedback so settings are easier to change and hold, helping return normal control operation. What it does:

• Fits onto the appliance control shaft so you can turn and set functions or temperatures.
• Replaces cracked, stripped, loose, or hard-to-turn knobs that slip or won't stay set.
• Restores positive engagement and smooth rotation for accurate selection.
• Helps eliminate erratic or difficult control operation caused by damaged knobs.

• Disconnect power or unplug the appliance before replacing controls.
• Most knobs pull straight off the control shaft; align splines and push new knob fully onto the shaft until seated.
• If the knob won't seat or control still slips, inspect the control shaft for damage—do not force the part.

Replacement burner control knob for ranges. Fits over the infinite switch to adjust surface element heat. Replace if cracked, broken, or missing.