Cooktop Tube Or Fitting

Tube and nut assembly for gas cooktops. Connects gas supply to burner components. Replace if cracked, corroded, or leaking to restore safe operation.

Tube and nut assembly for gas cooktops. Connects gas supply lines between components. Replace if cracked, loose, leaking, or damaged during service.

Gas tube assembly for cooktop burners. Connects gas supply to rear burner. Replace if tube is cracked, damaged, or has loose connections causing leaks.

Burner tube for gas cooktops. Connects gas valve to burner head. Replace if cracked, corroded, or damaged to restore proper gas flow to burner.

Burner tube that connects gas valve to the burner assembly on your cooktop. Replace if cracked, corroded, or damaged to restore proper gas flow.

Burner tube for gas cooktops. Connects the gas valve to the burner head. Replace if cracked, corroded, or damaged to restore proper gas flow to burners.

Main burner tube for gas cooktops. Delivers gas from the valve to the burner head. Replace if tube is cracked, corroded, or gas flow is obstructed.

Burner tube assembly for gas cooktops. Delivers gas from the valve to the burner head. Replace if cracked, corroded, or damaged to restore proper fit.

Gas supply tubing connects your cooktop's gas valve to the burner assembly. Replace if tubing is cracked, kinked, damaged, or leaking gas during use.

Gas supply tube that connects the manifold to the burner valves on your gas cooktop. Replace if cracked, damaged, or leaking to restore safe operation.

This 90° elbow fits fluid/gas lines, providing a compact right-angle connection between a 3/8" male NPT fitting and a 5/16" tubing. It helps route lines neatly and prevent kinks in tight appliance spaces. What it does:

• Creates a sealed right-angle transition from 3/8" male NPT to 5/16" soft or hard tubing
• Used where space requires a compact turn in water, refrigerant, or drainage lines
• Can reduce stress on hoses and tubing that would otherwise bend sharply
• Common replacement when fittings leak, vibrate, or become corroded

• Inspect mating threads and tubing for damage; replace any worn seals or ferrules before installing
• Hand-start threads to avoid cross-threading, then tighten with appropriate wrench — do not overtighten
• Use thread sealant or tape only if specified for the application; follow appliance manufacturer guidance
• Disconnect power and water/gas supply and relieve system pressure where applicable before servicing