Craftsman Parts

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Sponge air filter prevents dirt and debris from reaching your engine. Replace when dirty or damaged to avoid carburetor clogs and performance loss.

Carburetor assembly for snow throwers and small engines. Installs in the engine to mix air and fuel. Replace if cracked, clogged, or worn from use.

Drive belt for lawn tractors and riding mowers. Replace if worn, cracked, or slipping during operation. Verify fit with your model number.

This replacement part is a belt and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by MTD. Belts are important to many appliances and have many responsibilities. Belts are used to keep everything inside the machine running smoothly as the systems and parts turn. A new belt might be needed if the current one is loose, stretched out, or damaged in any way. The user can tell if the belt is not operating properly if there are abnormal noises coming from the equipment. Always double check the size of the belt as different machines require different specific parts. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.

Transmission belt transfers power from engine to drive system on riding mowers. Replace if you experience slipping, poor acceleration, or visible wear.

V-belt rotates tiller tines. Replace when worn, stretched, or broken to restore tilling performance. Verify fit with your model number before ordering.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part for a lawnmower. This v-belt facilitates rotation so that power is directed to the wheels and the mower deck. The v-belt works in conjunction with the small engine to power the lawnmower.Visible signs of damage include punctures, tears, scratches, rips, and erosion to the material that could prevent it from properly facilitating rotation in the lawnmower. If this occurs, the v-belt should be removed and replaced with this genuine OEM replacement part before using the lawnmower again.This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Yard Man, Troy-Bilt, and Cub Cadet.

Grass catcher bag for walk-behind mowers. Attaches to cutting deck frame to collect clippings. Replace if torn, worn, or damaged for proper collection.

Blade removal tool for lawn mowers and garden tractors. Safely holds the blade in place during removal or installation. Replace if damaged or missing.

Replacement oil tank cap for chainsaws with integrated press bulb. Covers oil reservoir to prevent debris contamination. Needed when cracked or broken.

Replacement tire and rim assembly for chipper shredders and log splitters. Installs on wheel axle for easy equipment transport. Order when damaged or worn.

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.

Hex head screw fastener for walk-behind lawn mowers. Secures components and housing parts. Replace if stripped, rusted, or missing for proper assembly.

The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.