Dishwasher Cable Or Retainer

This arm valve installs in the dishwasher's spray arm feed to control water flow. It helps maintain proper pressure so the spray arm spins and distributes water evenly for effective cleaning.

• Directs water through the spray arm and helps maintain wash pressure
• Prevents unintended backflow that can reduce spray performance
• If worn, stuck, or missing, lead to weak spray or poor cleaning results
• Common signs include intermittent wash coverage or spray arm not rotating as expected

• Disconnect power and turn off water before servicing
• Remove the rack/spray arm or feed manifold to access the valve
• Note the valve's orientation and seat the new valve fully in the same direction
• Reassemble and run a quick cycle to check for proper spray and leaks

Rope spring assembly that connects the dishwasher door to the base for smooth opening and closing. Replace if broken, frayed, or missing tension.

Guides the door balance cable in your dishwasher's hinge system. Replace if cracked, broken, or causing squeaking when opening the door.

Guides the dishwasher door balance cable for smooth operation. Replace if cracked, worn, or causing squeaking when opening or closing the door.

Secures the door cable assembly in your dishwasher. Replace this retainer if cracked, broken, or missing to restore proper door tension and operation.

Support strap that cushions and secures the dishwasher circulation motor, stabilizing the motor assembly to reduce vibration and help maintain alignment for steadier, quieter operation. Designed for circulation motors with softer bearings. What it does:

• Cushions and supports the circulation motor to limit movement and vibration and reduce motor noise.
• Secures the motor assembly to the tub/chassis to maintain proper clearance and fit.
• Helps prevent undue stress on motor bearings and mounting points that can cause premature wear.
• Commonly replaced when the strap is cracked, stretched, or no longer holds the motor firmly in place.

• Disconnect power and water supply before servicing; follow all safety and OEM service instructions.
• Remove access panels and any obstructing components to reach the circulation motor as required.
• Replace using the original mounting hardware; inspect motor mounts and bearings while accessible.
• Reassemble and run a short test cycle to confirm reduced vibration/noise and proper motor operation.

Rope cable that connects the door hinge spring to the dishwasher frame. Replace if broken, frayed, or snapped to restore door counterbalance support.

The Dishwasher Door Spring is an essential component designed to restore the functionality of your Samsung dishwasher. This genuine OEM part ensures that your dishwasher door operates smoothly, providing the right tension for easy opening and closing. Crafted with high-quality materials, the Dishwasher Door Spring is built to last, offering durability and reliable performance over time. Its precise design guarantees a perfect fit with a variety of Samsung dishwasher models, making installation straightforward and hassle-free. By choosing this genuine OEM part, you can trust that your appliance will maintain its original performance and efficiency, helping to extend its lifespan. Whether your current door spring is worn out, broken, or missing, the Dishwasher Door Spring is the ideal solution to restore your dishwasher's proper operation. Enhance your dishwasherGÇÖs reliability and enjoy a seamless user experience with this dependable and high-quality replacement part.

This is a steel cable that connects to the door hinge and pulley mechanism of your dishwasher, controlling how the door opens and closes. It provides tension to prevent the door from dropping open too quickly and helps it stay in position. Replace this cable if the dishwasher door slams down when opened, feels loose, or if the existing cable is frayed or snapped.

Cable retainer link kit for dishwashers. Secures and connects cables inside the dishwasher door assembly. Replace if cracked, broken, or missing.

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

Cable pulley assembly for dishwashers. Guides the lift cable that raises and lowers dish racks. Replace if pulley is cracked, worn, or broken.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

Harness cable tie secures and organizes wiring inside your appliance. Replace if damaged, cracked, or no longer holding wires firmly in place.

This is a small plastic or rubber fitting that secures the power cord where it enters the dishwasher's junction box or base. It prevents the electrical wiring from being pulled, kinked, or damaged by absorbing tension on the cord. Replace this part if it is cracked or missing, which can leave wiring exposed and vulnerable to damage during installation or use.

The Dishwasher Door Cable is an OEM replacement part for GE dishwashers. It works with the door latch assembly to ensure secure closure of the dishwasher door. The cable is responsible for connecting the door handle mechanism to the latch, allowing users to easily open and close the door with a gentle pull or push. Note: It is recommended to replace both at the same time.

Symptoms of a bad door cable include: 

• The door not fully latching or staying closed securely
• Excessive movement or play of the door when closed
• The cable becoming worn, frayed, or detached

Causes of a bad cable can be frequent use that results in wear and fatigue of the internal wiring over time. Damage from harsh detergents or excess moisture can also compromise the cable.

This OEM GE replacement part is compatible with models from Hotpoint, RCA, and some Kenmore dishwashers as well.