Dishwasher Knob, Dial & Button

Color: White.

Color: White

This timer skirt is the bezel that sits behind the timer knob on the control panel. It replaces a cracked or missing ring so you can securely turn the knob and select settings.

• Sits around the timer shaft as the cosmetic/structural ring behind the knob
• Supports and stabilizes the timer knob during setting selection
• Replaces a cracked, warped, or missing bezel that causes a loose or wobbly knob
• Typical symptoms include a broken ring, misaligned knob, or difficulty selecting settings

• Disconnect power before servicing
• Pull off the timer knob; remove any retaining clip or nut if present
• Remove the old skirt; align and seat the new skirt in the control panel
• Reinstall the knob and verify smooth operation

This replacement control-panel button provides the physical interface to press the underlying switch on your appliance. Swap a cracked, missing, or sticky button to restore reliable actuation and a clean, finished look on the console.

• Interfaces with the control panel's switch to register button presses
• Allows selection of settings or power depending on its position
• Common symptoms: button loose, cracked, sticking, missing, or not engaging the switch
• Restores proper feel and alignment when the original is worn or damaged

• Disconnect power to the appliance before servicing
• Access the control console/fascia to reach the button location
• Remove the old button and seat the new button into the panel, aligning with the actuator
• Reassemble the console and test operation

This timer knob is the user control that sets and advances wash cycles on your dishwasher. Replacing a worn or broken knob restores positive engagement with the timer shaft so you can reliably select and start cycles.

• Attaches to the timer shaft on the control panel to select and advance wash cycles
• Provides a secure grip and proper indexing to the dial markings
• Common fix for a stripped, cracked, loose, or missing knob
• When the knob no longer engages the shaft, the timer may not turn or settings may not change

• Disconnect power at the breaker before servicing
• Pull the old knob straight off the shaft; retain any spacer or clip from the original
• Align the new knob's insert with the flat/D-shape on the shaft and press firmly until fully seated
• Verify smooth engagement through the settings before restoring power

Replacement white timer knob for oven or range controls, restoring a secure, easy grip for setting the timer and selecting cooking durations; designed to slip onto the control shaft for straightforward replacement. What it does:

• Provides a tactile grip to turn and set the appliance's mechanical or manual timer control.
• Restores positive engagement with the control shaft so settings stay set and adjustments feel firm.
• Common symptoms that indicate replacement: cracked, faded, loose, slipping, or a knob that won't turn.
• Intended for direct-replacement use on matching spline-style timer shafts; verify shaft shape before ordering.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing controls.
• Remove the old knob by pulling straight off the control shaft; avoid twisting or levering on fragile bezels.
• Align the knob splines with the control shaft and push firmly until fully seated.
• If the knob does not fit easily, stop and verify spline pattern and part number to avoid forcing and damaging the control.

This is a white on/off pushbutton that restores the user control for turning the appliance on and off. It replaces a worn, cracked, or missing button to make the control panel usable again. What it does:

• Acts as the primary on/off actuator on the appliance control panel
• Allows reliable on/off switching when pressed
• Replaces cracked, chipped, or non-responsive buttons
• Helps resolve symptoms like a loose, stuck, or missing on/off button

• One white on/off pushbutton

• Disconnect power to the appliance before attempting any service
• This button typically snaps into the control panel; use gentle prying to remove the old button
• Inspect the control panel bezel and switch mechanism for damage before installing

This dishwasher control knob replaces a cracked or missing front-panel knob so you can select cycles and start the appliance normally. It restores a secure grip and a clean, factory look in a black finish.

• Fits onto the control shaft to turn and select wash cycles and settings
• Provides positive engagement so the control turns without slipping
• Common symptoms: knob cracked or stripped, loose or falling off, hard to turn, or unable to select/start cycles
• Useful when the original knob is lost or discolored

• Disconnect power to the dishwasher before servicing
• Pull the old knob straight off the control shaft; if tight, rock gently—avoid prying on the panel
• Align the flat/keyed side of the new knob with the shaft and press fully into place

This replacement knob timer restores manual cycle selection and user control for your appliance's timer dial, making it easier to set and change cycles. It installs on the timer shaft and provides a firm grip for accurate adjustments. What it does:

• Replaces a worn, cracked, or missing timer knob so you can turn and set the timer dial again
• Provides a secure fit on the timer shaft to prevent slipping while selecting cycles
• Helps resolve symptoms like a loose or spinning knob, difficulty selecting settings, or inability to start timed cycles
• Restores tactile feedback and clear pointer alignment for accurate cycle selection

• One replacement knob timer (1 count)

• Disconnect power to the appliance before starting any repair
• Most installs require pulling the old knob straight off the timer shaft and pushing the new knob onto the shaft until fully seated
• Inspect the timer shaft for damage or debris before installing the new knob

Color: White.

This black timer knob replaces a worn, cracked, or missing control knob so you can easily set the oven or range timer. Restores a positive grip and clear pointer for accurate timer adjustments. What it does:

• Fits onto the timer/control shaft to allow manual setting of the cook/timer function
• Replaces broken or stripped knobs that spin or won't engage the control
• Provides a visible pointer for precise timing and repeatable settings
• Improves user grip and control when turning the timer dial

• One black timer knob

• Power off the appliance before servicing electrical controls
• Pull the old knob straight off the shaft; align and push the new knob onto the splined shaft until fully seated
• Do not force the knob onto the shaft; verify correct spline alignment to avoid damage
• If the knob does not seat or the control shaft is damaged, inspect the control assembly and replace as needed

This push button is the user-facing control button that completes a control circuit when pressed, restoring responsiveness to a worn or broken selector interface. It provides a direct, replaceable way to fix unresponsive or stuck control input. What it does

• Acts as the external control button that engages the appliance's internal switch when pressed
• Restores tactile feedback and reliable control input if the original button is cracked, loose, or missing
• Common symptom fix: buttons that stick, don't depress fully, or fail to activate functions
• Works with the matched internal switch assembly to ensure consistent operation

• Disconnect power before any service
• Remove the control panel or bezel as needed to access the button; avoid prying on surrounding trim
• Replace the button by aligning and snapping it into the button housing; do not force or bend retaining tabs
• If the button does not restore function, inspect the underlying switch/mechanism for damage before ordering additional parts

This replacement timer control knob lets you set and turn the appliance's timer with a clear grip and click-action feedback. It restores a worn or missing knob so you can reliably select time settings and operate the timer control. What it does:

• Provides a secure grip for turning the timer control and selecting time settings
• Replaces cracked, stripped, or missing timer knobs that are hard to turn
• Restores tactile click and positional indexing for accurate control
• Helps eliminate slipping or wandering of the timer pointer during use

• Install on the timer shaft by aligning the hub and pressing firmly until seated
• If knob is difficult to remove, use a flat tool gently; avoid damaging surrounding trim
• Disconnect power to the appliance before servicing timer components
• If the timer mechanism itself is damaged or nonfunctional, replace the complete timer assembly

This knob latch secures a control knob to the appliance control shaft so knobs stay engaged and turn smoothly. It replaces a worn or broken latch to restore proper knob fit and reliable control operation. What it does:

• Holds the control knob onto the control shaft so knobs don't wobble or fall off
• Ensures consistent engagement for accurate temperature and function selection
• Commonly used to address loose or slipping knobs and intermittent control contact
• Works as a direct-fit replacement when the original latch is damaged or worn

• Disconnect power to the appliance before starting any repair.
• Typically installed from the front of the control panel after removing the knob; basic hand tools may be required.
• Inspect the control shaft and knob for wear and replace damaged components together for best fit.

This push button is a replacement control panel button that restores a responsive tactile switch on your appliance. It provides a simple, user-facing interface for selecting cycles or options. What it does:

• Replaces a worn, broken, or missing control panel button so selections can be made reliably
• Restores tactile feedback for accurate button presses
• Helps resolve symptoms such as unresponsive or stuck buttons and cosmetic damage to the panel
• Designed to fit the original button location and align with the underlying switch mechanism

• One (1) push button

• Install by removing the appliance control panel or trim per your model's service instructions
• Ensure power is disconnected before attempting replacement to avoid shock or damage
• Handle the button and surrounding bezel carefully to avoid bending clips or scratching the panel