Dishwasher Knob, Dial & Button

This replacement control panel push button restores a responsive, secure button on the appliance's front console so you can reliably select cycles and settings. It's a direct-fit cosmetics/function piece for worn, broken, or missing buttons. What it does:

• Replaces a damaged, cracked, or missing control panel push button
• Provides a solid contact surface for selecting cycles and settings
• Helps resolve a button that sticks, is loose, or fails to engage
• Restores original look and tactile feedback on the console

• Disconnect power to the appliance before beginning any work.
• Remove the console or trim per the manufacturer's instructions to access and replace the button.
• Snap the new button into place; avoid forcing or bending surrounding parts.
• Check the underlying switch or control assembly.

This inset control knob replaces a worn or broken stove/oven control knob to restore secure, easy control of temperature and function settings. It matches OEM fit for direct replacement on compatible GE ranges and cooktops. What it does:

• Replaces a damaged or stripped control knob so settings turn and stay in place
• Provides a positive grip for precise temperature and function selection
• Restores correct fit on the control shaft to prevent slipping or wobble
• Helps resolve symptoms like a loose, cracked, or hard-to-turn knob

• Disconnect power or unplug the appliance before servicing to avoid shock or injury
• Pull off the old knob straight from the control shaft; align splines and press the new knob onto the shaft until fully seated
• Do not force the knob; if it won't seat, verify shaft type and orientation to avoid damage

A replacement knob latch handle that secures and indexes the appliance control knob for reliable selection and tactile feedback. Restores proper knob engagement to help prevent slipping or incomplete setting changes. What it does:

• Latches and holds the control knob in selected positions so settings stay engaged.
• Provides tactile detents for clear position feedback when turning the knob.
• Commonly replaces worn, cracked, or broken latch pieces that let the knob slip or fail to engage.
• Fits directly onto the control shaft and works with the existing knob assembly.

• Disconnect power (unplug or switch off circuit) before servicing to avoid shock or injury.
• Removal typically requires removing the control knob and/or console trim to access the latch; keep track of fasteners.
• Inspect the control shaft and surrounding components for wear; replace damaged knobs or retention clips as needed.

This replacement knob timer dial restores reliable control of your appliance's timer, giving a solid grip for setting cycles and improving user control. Ideal for replacing cracked, worn, or loose timer knobs. What it does:

• Provides a durable dial surface for turning and selecting timer settings
• Replaces cracked, stripped, or loose knobs that slip on the timer shaft
• Helps restore proper engagement so the timer responds to user input
• Improves safety and usability by giving a secure, easy-to-turn grip

• Disconnect power to the appliance before beginning any work
• Most knobs pull straight off the timer shaft; align splines and push the replacement on until seated
• Do not force the knob—confirm correct orientation before full installation

This replacement timer knob restores manual control of the oven timer and makes it easy to set cooking durations and timed functions. Simple push-on design gives a like-new feel when the original knob is cracked, worn, or missing. What it does:

• Replaces a damaged or missing oven timer knob so you can set and adjust the timer accurately
• Provides a clear pointer for selecting time settings and monitoring countdowns
• Helps eliminate slipping or stripped-feel when turning the timer shaft
• Restores safe, consistent user control of timer functions

• Disconnect power to the appliance before starting any work.
• Line up the knob's splines with the timer shaft and push firmly until fully seated; do not force.
• If the shaft is damaged or the knob won't seat correctly, inspect the timer shaft and replace the control if needed.

This replacement knob latch secures a control or selector knob and restores stable knob engagement on compatible GE appliances. It helps stop knobs from slipping, popping off, or failing to stay in the selected position. What it does:

• Holds a control or selector knob in place so settings stay engaged
• Restores normal knob-click action and tactile feedback
• Common fix when a knob slips, pops off, or won't stay set
• Small plastic latch used inside the control assembly

• Disconnect power to the appliance before beginning any repair.
• Remove the control knob and any trim to access the old latch; installation typically requires panel access.
• Replace the faulty latch with the new part and reassemble; verify knob operation before returning appliance to service.

This bezel is a trim piece for Frigidaire dishwashers that finishes and protects an opening on the door/control panel, helping the mating component sit properly while restoring a clean, factory look.

• Frames and protects the panel opening for a control or latch component
• Helps keep the mating part aligned and seated correctly
• Covers raw edges and gaps to reduce wear and debris buildup
• Common symptoms: broken or missing trim, loose/wobbly bezel, cracked retaining tabs, cosmetic damage

• Disconnect power to the dishwasher before servicing
• Remove the control knob or latch handle to access the bezel
• Release the bezel's retaining tabs/clips and lift it out from the panel
• Align the new bezel and snap/secure it into place; reinstall any removed parts and test operation

A replacement push-style control button that restores tactile operation for electronic control panels. Replaces a worn, broken, or missing button so panel controls are easier to press and clearer to operate. What it does:

• Physically engages the control switch when pressed so selections register properly
• Replaces buttons that are cracked, loose, or missing and stops accidental button presses
• Helps resolve symptoms like unresponsive or intermittent button operation and broken or stuck buttons
• Matches original shape and mounting to fit the control panel opening

• One control button

• Power off and unplug the appliance before accessing the control panel
• Remove the control panel bezel or housing per the appliance service instructions to access the button
• Inspect the button retainer and switch for damage; replace any damaged fasteners or clips as needed

A replacement black select button for the control console that restores a responsive, easy-to-use selector on compatible GE appliances. Replaces a cracked, worn or non-moving button so settings can be chosen reliably. What it does:

• Acts as the user-facing selector button on the control panel
• Allows selection of oven/cooktop or cycle options when pressed
• Fixes symptoms like a broken, stuck, loose or missing button
• Restores normal tactile feel and visual appearance of the console

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Access may require removing the control panel or overlay—refer to your model's service instructions.
• Gently remove the old button and snap or press the replacement into place; avoid forcing it.

This push-button replaces the Delay/Star control on compatible GE laundry appliances, restoring a responsive delay-start/select function on the console. It's a simple, direct replacement that lets the machine accept delay-start inputs reliably. What it does:

• Registers user presses for the delay/start feature so the washer/dryer can accept delayed-start commands.
• Provides the tactile "push" action and electrical contact needed for console input.
• Commonly used when the delay/select button is unresponsive, sticky, or physically damaged.
• Works as a single-button replacement; matches OEM fit and function.

• One push-button Delay/Star control.

• Disconnect power to the appliance before starting any service.
• Access requires removing the control panel; handle internal connectors and ribbon cables gently.
• Do not operate the appliance with panels removed; ensure all parts and fasteners are reinstalled.

This is the On/Off push button used to operate the appliance's power control. It restores a reliable tactile switch surface so the unit responds correctly when turning power on or off. What it does:

• Replaces a worn or broken On/Off push button so the control panel registers user input reliably
• Helps resolve symptoms like a loose, stuck, or non-responsive power button
• Restores proper tactile feedback for confident operation
• Works with the panel's existing switch mechanism and trim to complete power input actions

• One On/Off push button

• Turn power to the appliance off at the breaker or unplug before servicing
• Remove control panel trim to access and replace the push button; handle internal parts gently
• Verify fit and orientation before final reassembly