Dishwasher Panel Parts

The Facia Panel is an OEM part for Bosch dishwashers. It's the front interface of the appliance, housing the control buttons and display that allow users to select and monitor wash cycles.

The causes of a bad Facia Panel can be varied. Over time, the panel may exhibit wear and tear, the labels on the buttons can fade, or the buttons themselves can become unresponsive due to frequent use. In some cases, exposure to moisture or an accidental impact can damage the panel, affecting its appearance and functionality.

Symptoms of a bad Facia Panel include:

• Unresponsive buttons
• Faded labels or displays
• Physical damage like cracks or chips
• Difficulty in operating the dishwasher due to malfunctioning controls

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Control Panel Facia is an OEM replacement part for Bosch built-in dishwashers. As the interface displays cycle selections and status lights, it plays a pivotal role in machine operation.

Causes usually relate to the extended exposure facias endure to environmental conditions and physical contact over years of use. As a high-touch interface, replacement becomes necessary when usability declines to restore optimized functionality.

Symptoms of a compromised control panel facia can include:

• Difficulty distinguishing settings or cycle progress lights
• Loose or unstable mounting allows unwanted movement
• Cracked facia surfaces breaching external barrier protection
• Peeling or flaking overlay defeating clear legibility

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

Color: White

This console cover replaces the front control panel fascia on the dishwasher. It restores a clean, readable control surface so you can select cycles and options reliably.

• Houses and labels the control buttons for cycle selection
• Protects internal control components from moisture and everyday use
• Wear, cracks, peeling graphics, or unresponsive/erratic button areas indicate replacement
• Cosmetic damage or faded markings can make controls hard to read

• Disconnect power before service
• Open the door and remove screws securing the console; transfer any switches or keypad ribbon as directed
• Handle the ribbon cable and connectors carefully to avoid damage
• Verify proper alignment and secure all fasteners before restoring power

The Panel-Facia is an OEM part for Bosch dishwashers. It provides an interface and housing for the control buttons and touch display of the dishwasher.

Causes of a bad panel-facia can include normal wear and tear over time, exposure to moisture or impacts, or failure of the electronic components behind the panel.

Symptoms of a bad panel-facia include:

• Unresponsive or intermittent control buttons
• Flickering or non-functional display screen
• Physical damage like cracks, scratches or missing pieces that compromise the panel's protective barrier

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Dishwasher Control Panel Facia is an OEM replacement part designed specifically for Bosch dishwashers. It serves as the interface to control all wash cycles and provides informative displays. Causes of a damaged control panel facia can be general wear and tear over time. 

Symptoms of a bad control panel facia include:

• Non-responsive buttons
• Cracked or broken surfaces
• Controls that do not align properly

This genuine Bosch facia restores the correct function and appearance of the control panel. This Bosch part can also be used on Thermador and Gaggenau appliances.

The Dishwasher Front Lower Cover Assembly is an essential component for maintaining the appearance and functionality of your Samsung dishwasher. This genuine OEM part ensures a perfect fit, seamlessly integrating with your appliance to restore its original look. Designed specifically for Samsung dishwashers, the front lower cover assembly protects the internal components from dust and debris, enhancing the overall efficiency of your appliance. Its durable construction guarantees long-lasting performance, providing reliable protection and a sleek finish. Installing the Dishwasher Front Lower Cover Assembly is straightforward, allowing you to quickly replace a cracked, missing, or damaged cover without hassle. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your dishwasher operates smoothly. Whether you're repairing an older model or maintaining a current appliance, this cover assembly is the ideal solution to keep your dishwasher looking and working like new. Enhance your kitchen experience with this dependable and high-quality replacement part.

The Panel Facia is an OEM part for Bosch dishwashers. It is responsible for covering the front interior panel and electrical components of the dishwasher. The panel facia plays an important protective and aesthetic role.

Causes of a bad panel facia can include damage from harsh cleaning chemicals, cracks or breaks from impact, or signs of normal wear and tear over time. 

Symptoms of a bad panel facia include:

• Cracks, broken pieces, or warped panels
• Troubles with buttons not responding properly  
• Exposure to electrical wiring
• Deterioration of surface finishes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Panel-Facia is an OEM part for Bosch dishwashers. As the front panel interface, it houses all control buttons, displays, and status indicators.

Symptoms of a bad panel-facia can include non-responsive or stuck buttons, indecipherable displays, or cracks that compromise the panel's integrity. 

Causes of a bad panel-facia dishwasher include:

• Unresponsive or inaccurate control buttons
• Fault codes that cannot be cleared  
• Cracked or damaged fascia compromising controls
• Disrupted electronic communication preventing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Panel-Facia is an OEM part for Bosch dishwashers. As the front panel interface, it houses all control buttons, displays, and status indicators.

Symptoms of a bad panel-facia can include non-responsive or stuck buttons, indecipherable displays, or cracks that compromise the panel's integrity. 

Causes of a bad panel-facia dishwasher include:

• Unresponsive or inaccurate control buttons
• Fault codes that cannot be cleared  
• Cracked or damaged fascia compromising controls
• Disrupted electronic communication preventing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Color: Black

The Panel-Facia is an OEM component specifically designed for select Bosch dishwashers featuring full-paneled front doors. It serves as the outer enclosure protecting internal electronics and circuitry.

Premium high-gloss surfaces endure years of moisture exposure without dulling. Thick reinforced polymers guard valuables against accidental bumps or bashes from nearby foot traffic.

Causes for replacement typically relate to direct impact fractures exposing delicate insides to potential liquid intrusion. Prolonged harsh chemical contact may also lead to stress cracks developing over time.

Symptoms requiring a new panel-facia include:

- Loose fasteners allowing unwanted side-side movement or door misalignment  
- Physical splits, punctures, or holes compromising the waterproof barrier
- Faded, scratched, or damaged finishes detracting from the modern aesthetic

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and selected full-paneled Kenmore dishwashers maintaining consistent appearances. Reinstallation preserves protection and attractiveness.
 

This lower front toe kick panel restores a clean, finished look at the base of the dishwasher and helps shield the bottom area from debris and bumps. Replace a cracked, dented, or missing panel to secure the opening.

• Covers and conceals the lower access opening at floor level
• Helps protect base components from accidental contact and household debris
• Restores appearance when the original panel is damaged or missing
• Common symptoms: visible gap at the bottom front, loose or rattling kickplate, bent or broken panel

• Disconnect electrical power before servicing
• Open the door to access and remove the mounting screws holding the old panel
• Position the new panel, align tabs/slots, and reinstall screws—do not overtighten
• The panel clears the floor and does not interfere with door operation

Color: Black. Other colors: For white use WP3369614.

This lower front kickplate for dishwashers covers the base opening to protect internal components and complete the appliance's appearance. The almond-finish toe kick helps reduce noise escape and restores a clean look when the original panel is damaged or missing. What it does:

• Covers and protects the lower access area, hiding leveling legs and insulation
• Helps contain sound from the base area
• Restores a clean, finished front appearance
• Replace if the kickplate is cracked, bent, rattling, discolored, or missing

• 1 toe kick panel (almond)

• Disconnect power at the breaker before starting; edges may be sharp
• Open the door to access and remove the mounting screws securing the old panel
• Reuse original screws/insulation; align the new panel and set height using the mounting slots
• Tighten screws evenly and verify the door opens/closes without rubbing the panel

Color: White

Color: White