Dryer Belt

The Drive Belt is an OEM replacement part for GE dryers. It is responsible for transferring rotational power from the dryer's motor to the drum, allowing it to spin during the drying cycle.

Symptoms of a faulty dryer drive belt include:

• Drum not spinning
• Unusual noises coming from the dryer
• Inability to start the drying cycle

A bad dryer drive belt can be caused by wear and tear over time or damage due to excessive tension, improper installation, or overloading the dryer. If you notice that the drum is not spinning or if you hear unusual noises during operation, it may be time to replace the old or damaged drive belt with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Drive Belt and Timing Gear is an essential component for maintaining the smooth operation of your dryer. Designed specifically for Samsung dryers, this genuine OEM part ensures a perfect fit and reliable performance. The durable drive belt works in tandem with the timing gear to facilitate efficient drum rotation, preventing common issues like slipping or uneven drying. By replacing worn or damaged parts with this high-quality belt and gear assembly, you can extend the life of your appliance and restore its optimal functionality. Installation is straightforward, allowing you to quickly get your dryer back to work without the need for professional assistance. Choosing this genuine OEM part guarantees compatibility and durability, providing peace of mind and enhancing your dryerGÇÖs performance. Whether you're experienced in DIY repairs or tackling a project for the first time, the Dryer Drive Belt and Timing Gear is a reliable choice to keep your Samsung dryer running smoothly and efficiently.

This drive belt transfers the motor's rotation to the appliance's drive system, allowing the mechanism to move as designed. A stretched, glazed, or broken belt can stop movement or cause slipping and noise.

• Transfers motor power to the drive system for proper operation
• May cause no movement even though the motor runs or hums
• May produce squealing/chirping or a burning rubber smell
• Visible belt wear can include cracks, fraying, or glazing
• Intermittent slipping or reduced performance under load

• Disconnect power before servicing; shut off gas supply.
• Access the belt through the designated service panel; note the belt routing before removal.
• Inspect pulleys and the idler/tensioner for wear; replace worn components.
• Align and tension the new belt, then hand-rotate to verify tracking before testing.

The Belt is an OEM component for Whirlpool dryers. It is a crucial component that transfers the rotational motion from the dryer's motor to the drum, enabling the tumbling action that facilitates efficient drying.

Causes of a bad belt can include excessive wear and tear due to prolonged use, exposure to high temperatures, or improper installation. A damaged or worn-out belt can lead to various issues with the dryer's performance.

Symptoms of a bad belt include:

• The drum is not spinning or rotating properly
• Squeaking or grinding noises during the operation
• Visible cracks, fraying, or signs of damage on the belt
• Clothes taking longer to dry or not drying completely

This OEM part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dryer drum belt wraps around the drum and engages the motor and idler to rotate the load. Replacing a worn or broken belt restores consistent tumbling, helping clothes dry evenly and preventing slippage and related noise. What it does:

• Transfers motor rotation to the drum for tumbling.
• Works with the idler pulley to maintain proper belt tension and smooth rotation.
• Common symptoms: drum won't turn though the motor runs; loud squeal or thump; burning rubber smell; clothes stay wet due to no tumbling.

• One dryer drum belt.

• Disconnect power and shut off gas before servicing.
• Access the belt by removing the top/front panels; note the routing around the drum, idler, and motor pulley.
• Inspect the idler pulley and drum rollers while open; replace any worn components.
• After routing the belt, rotate the drum by hand to ensure alignment before reassembly.

The Drive Belt is an OEM part for Bosch dryers. It works to transfer power from the dryer motor to the drum, helping rotate and tumble clothes during the drying cycle.

Causes of a bad drive belt usually come down to regular use over several years. Infrequent belt replacement intervals can lead to premature failure.

Symptoms of a bad drive belt can include:

• The dryer not starting or not completing full cycles
• Loud squealing or slipping noises coming from the dryer
• Visible cracking, fraying, or looseness of the belt

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Belt Drive is an OEM part for Bosch dryers. It provides power transmission from the motor to the drum through its durable, stretch-resistant belt. Precise alignment of the belt is crucial for smooth, efficient operation.

Symptoms of a bad belt drive include slipping, squealing noises, or vibrations during use. The belt may show signs of cracking, stretching, or looseness. 

Causes can be normal wear over many cycles of use, overloading the dryer with too many wet items, or accidentally impacting or bending internal components.

Causes of a bad belt drive include:

• Misalignment placing undue stress on the belt or pulleys
• Stretching, cracking, or loosening of the belt over time
• Damage to the belt from snags or debris caught in the mechanism

This OEM Bosch part is also compatible with some Kenmore, Maytag, and Whirpool dryers. Replace yours today for quiet, dependable performance.
 

This 5-rib poly-V drive belt transfers the motor's power to the appliance's drive system so the drum or basket turns smoothly. Replacing a stretched, glazed, or broken belt restores proper rotation and reduces slipping and noise.

• Transfers motor rotation to the drive system to spin or tumble the drum/basket
• Provides the necessary friction grip across pulleys; a worn belt may slip under load
• Typical symptoms: squealing or chirping, burning rubber odor, slow or no spin/tumble, visible cracks or fraying
• Intermittent movement at startup can also indicate belt wear

• Disconnect power and allow moving parts to stop before servicing
• Access the belt through the service panel(s) per your model's service information and note the routing path
• If equipped, release the belt tensioner/idler, remove the old belt, route the new belt, then reapply tension
• Rotate the pulley/drum by hand to seat the belt and verify alignment before reassembly and test

The Blower Belt is an OEM part for Bosch dryers. This belt efficiently transmits rotation from the motor to the blower fan, circulating heated air through the dryer drum.

Causes of a bad blower belt can include drying and cracking from heat exposure over many cycles.

Symptoms of a bad blower belt include:

• The blower fan not spinning or rotating slower than usual
• Longer dry times or an inability to fully dry clothes
• An intermittent squealing or squeaking noise from the belt

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This poly-V blower belt links the motor to the blower wheel to move air through the appliance. Replacing a worn or broken belt restores proper airflow and helps maintain reliable drying/venting performance. What it does:

• Transfers motor rotation to the blower/impeller to circulate air
• Helps maintain proper airflow through the cabinet and exhaust
• Common failure signs include weak or no airflow at the vent, longer run times, or safety shutdown from poor airflow
• Physical clues: belt broken, frayed, glazed, stretched, or squealing from the blower area

• 1 poly-V blower belt

• Disconnect power and, if applicable, shut off gas supply before servicing
• Access varies by model; remove panels or blower cover to reach the belt
• Note routing; seat belt ribs in pulley grooves and ensure correct tracking
• Rotate the blower by hand to confirm alignment before reassembly and test run

This replacement drive belt transfers power from the motor to the appliance's moving component. Replacing a worn, stretched, or broken belt restores proper motion and helps eliminate slippage, noise, and poor performance.

• Transfers motor rotation to a pulley-driven component
• Maintains proper grip and tension when routed over the idler/tensioner
• Ideal replacement for belts that are cracked, glazed, frayed, or broken

• Disconnect power; turn off gas supply if applicable
• Access the belt through the service panel per your model's service information
• Note the routing and idler/tensioner position before removal; take a photo for reference
• Inspect pulleys and the idler for wear; alignment and belt tension after installation

Measures 72". If longer belt is needed use WP8182481 which measures 73 5/8".

This drive belt transfers the motor's power to the machine's drive system so the tub or drum can rotate. Replacing a stretched, glazed, or broken belt restores consistent movement and helps eliminate slippage noises and burning-rubber odors.

• Transfers rotation from the motor pulley to the drive/transmission pulley
• Typical symptoms of a worn belt: no spin or weak spin, no agitation, motor runs but tub/drum doesn't move
• Visual signs include cracks, fraying, glazing, or excessive slack

• Disconnect power; turn off water supply before servicing
• Access the belt by removing the appropriate panel; note the belt routing before removal
• Release the tensioner or loosen motor mounts to remove the old belt, then fit the new belt around the pulleys and rotate by hand to seat it
• Confirm proper tracking and clearance before reassembly and test run

This is a replacement dryer drive belt that wraps around the drum to turn it during drying cycles, restoring proper drum rotation for even drying. Designed to fit specified GE laundry dryers that use this OEM part number. What it does:

• Wraps around the dryer drum and motor/idler to transmit motor power and rotate the drum
• Replaces a stretched, cracked, frayed, or broken belt that causes the drum not to tumble
• Stops slipping or intermittent rotation that can lengthen drying times or prevent tumbling
• Helps eliminate squealing or grinding noises caused by a failing belt rubbing on components

• One dryer drive belt

• Disconnect power to the dryer before starting any repair; follow lockout/tagout best practices
• Access the drum per your model's service instructions (top/front panel or rear panel removal may be required)
• Route the belt around the drum and over the idler pulley/motor shaft as shown in your service diagram; ensure proper belt alignment and tension before reassembly
• Inspect idler pulley, rollers, and drum glides for wear while the dryer is open; replace if worn to prevent premature belt failure

This drive belt turns the dryer drum by linking the motor pulley and idler assembly. Replacing a stretched or broken belt restores smooth tumbling performance and helps eliminate slippage noises so clothes can dry evenly. What it does:

• Transfers motor rotation to the drum for consistent tumbling
• Works with the idler/tensioner to maintain proper belt tension and grip
• Typical failure symptoms: drum won't turn, motor runs but drum is still, squealing or thumping noises, burning-rubber smell, or a visibly frayed/split belt
• On models with a belt switch, a broken belt can stop the dryer shortly after starting

• 1 drive belt

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the belt by removing the top and front panels; support the drum when the front is off
• Release belt tension from the idler, note the routing, and install the new belt around the drum, idler, and motor pulley per your model's diagram
• Rotate the drum by hand to seat the belt before reassembly and testing

This replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum for normal drying. Replaces worn or broken belts to restore tumbling and help your dryer move loads evenly. What it does:

• Transfers motor power to the drum so clothing tumbles during the drying cycle
• Commonly used when the drum slips, won't turn, or makes a rubbing/squealing noise
• Helps maintain proper drum alignment and smooth rotation when in good condition

• Disconnect power before any service; follow the dryer's service manual for safe access
• Inspect idler pulley and motor shaft for wear when replacing the belt
• Re-tension and route the belt per the OEM diagram to avoid mis-tracking