Dryer Filter

Color: white. Measures about 10-1/2 inches wide by 13-1/2 inches deep.

Color: Gray. Measures about 16 inches wide by 7 inches high.

This Lint Screen is an OEM part compatible with Whirlpool dryers. Designed specifically for Whirlpool models, this lint screen effectively captures lint and debris during the drying cycle, ensuring your dryer operates efficiently and safely. Its fine mesh construction is optimized for trapping even the smallest particles without obstructing airflow. 

A lint screen can become faulty due to wear and tear, overloading of the dryer, or improper maintenance. Accumulated lint or damage to the screen can reduce its effectiveness, potentially leading to longer drying times and increased energy consumption. 

Symptoms of a bad lint screen include:

• Reduced drying efficiency.
• Excessive lint accumulation on clothes.
• Longer than usual drying times.
• Unusual noises during the drying cycle.
• Visible damage or wear on the screen.

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
 

Color: white. It measures about 12-1/2 inches wide by 8 inches high.

A lint filter or lint trap prevents clogging of the dryer vent. When a garment is tumbling around in the dryer, the high heat combined with agitation can lead to fiber shedding. The lint filter captures the fibers and prevents them from blocking the dryer vent hose. If there is too much accumulation already, the excess fibers may not stay in the filter and could flow into the hose. Installing a brand-new lint filter can solve this problem. It can promote better energy consumption, faster drying, proper airflow, and reduced fire risk. Replacement is simple and straightforward and no tools are needed. Open the dryer and access the lint filter housing. Open the cover and slide the old filter out. Insert the replacement. This SpeedQueen 61376P Lint Filter is a genuine replacement part that will work with dryers made by Amana, Kenmore, SpeedQueen, and Caloric. It has a screen and a plastic frame. This OEM SpeedQueen lint filter is sold individually. A gas valve coil kit is available but sold separately.

Replacement grill trim that restores your appliance's exterior finish and helps direct airflow. Use this grill when the original piece is cracked, missing, loose, or cosmetically damaged to regain a clean, finished appearance. What it does:

• Covers and protects internal components behind the appliance front or vent area.
• Helps direct airflow and reduce drafts around the appliance opening.
• Prevents debris or fingers from contacting internal parts.
• Stops rattling or vibration caused by a bent or loose grill.
• Restores the appliance's original look when the factory grill is damaged.

• Disconnect power at the breaker and allow the appliance to cool before starting any work.
• Remove existing fasteners or clips; retain original screws if they are reusable.
• Align the new grill, then secure with the original hardware; avoid over-tightening to prevent cracking.

This lint filter is the removable screen that traps lint and debris from dryer exhaust so air flows freely and loads dry more efficiently. Designed as a direct replacement for the factory lint-trap element. What it does

• Captures lint, fibers and small debris from the dryer drum exhaust to help prevent clogs.
• Restores proper airflow that can reduce long dry times and help the dryer operate more efficiently.
• Helps prevent lint buildup in the dryer vent and blower housing, lowering risk of overheating.
• Easy to remove and clean for routine maintenance and improved drying performance.

• One lint filter (screen) as shown.

• Disconnect power to the dryer before inspecting or replacing parts.
• Remove the old lint screen, clean the housing, then seat the new screen fully into the slot.
• Clean or replace the screen regularly; inspect the housing for obstructions.
• If you feel resistance or the screen doesn't seat properly, stop and check for foreign objects or damage.

The Dryer Lint Filter Assembly is essential for maintaining optimal dryer performance. This genuine OEM part effectively traps lint and debris, preventing buildup that can reduce efficiency and pose a fire hazard. Designed for compatibility with a wide range of Samsung dryer models, it ensures a perfect fit and easy installation. Replacing your old or damaged lint filter assembly with this Dryer Lint Filter Assembly will help your dryer run smoothly, extend its lifespan, and improve drying results. Durable and reliable, this genuine OEM part guarantees the quality and functionality you expect from your Samsung appliance, providing peace of mind and enhanced performance for your household.

By Frigidaire. Flat, 13" wide, 8" high

This lint screen felt is a replacement seal that fits around the dryer lint screen to help block lint and improve airflow through the lint trap. It restores a tight seal for more consistent drying performance. What it does:

• Seals the gap between the lint screen and housing to help keep lint in the trap
• Helps maintain proper airflow through the lint screen area
• Reduces lint bypass that can lead to extra lint buildup in the cabinet
• Commonly used when the original felt is worn, torn, or compressed

• One lint screen felt

• Disconnect power to the dryer before starting any service
• Remove the lint screen and fit the felt into the screen housing slot, making sure it seats evenly
• Clean the lint trap area of debris before installing the new felt
• If adhesive is required by the dryer design, use only manufacturer-recommended adhesive; otherwise the felt should press-fit into place

This replacement screen is a protective mesh that helps keep debris out of the appliance's internal flow pathways and components. It restores proper screening to prevent clogging and helps maintain reliable operation. What it does

• Catches lint, rust, scale, and other debris before it reaches valves, pumps, or sensors
• Helps maintain proper water/air flow to reduce service issues caused by blockages
• Protects internal components from premature wear due to particulate contamination
• Can help resolve symptoms like reduced flow, intermittent operation, or debris-related errors

• One replacement screen

• For safety, disconnect power (and water if applicable) before starting work
• Access and removal steps vary by model—refer to your service manual for exact disassembly
• Inspect mating seals or housings; replace any damaged parts to ensure a proper fit

The Lint Filter Support for Dryer is an OEM replacement part for GE electric dryers. The lint filter support holds the lint filter securely at the exhaust vent opening, preventing lint from escaping into the home during the drying cycle. It plays a key role in capturing lint and controlling its removal from circulating air.

Symptoms of a bad lint filter support include: 

• The lint filter not sitting properly at the exhaust vent
• Lint escaping past the filter and potentially blocking the vent tube
• Visible damage like cracks or loose clips 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore dryer models. 

The Lint Filter is an OEM part for LG dryers. It is responsible for capturing lint and debris from the laundry, preventing it from clogging the dryer vent and providing easy cleaning. A bad lint filter can be caused by regular use and the accumulation of lint and debris over time. It may also become damaged if not cleaned regularly or if items such as coins or small objects accidentally get caught in the filter. Measures: about 12 in wide by 11 in high

Causes of a lint filter can include normal wear and tear over time, excessive lint buildup or clogging, or physical damage due to improper cleaning or handling.

Symptoms of a bad lint filter include:

• Clothes taking longer than usual to dry.
• Reduced airflow or poor drying efficiency.
• Lint accumulating on the dryer drum or around the door.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Note: If your filter won't seat all the way down in the housing, order filter ADQ56656403. Due to manufacturer changes, in some cases, the filter guide MEA49050001 and filter cover MCK66787901 may also need to be replaced.