Dryer Filter

The Dryer Lint Filter Assembly is designed to efficiently capture lint and debris during each drying cycle, ensuring your dryer operates smoothly and safely. This essential component helps prevent lint buildup, reducing the risk of overheating and potential fire hazards. By maintaining a clean airflow, the lint filter assembly enhances the dryer's drying efficiency, allowing your clothes to dry faster and more evenly. Made as a genuine OEM part, this lint filter assembly guarantees compatibility with a wide range of Samsung dryer models, ensuring a perfect fit and easy installation. Its durable construction ensures long-lasting performance, providing reliable protection for your appliance over time. If your original lint filter is cracked, missing, or no longer functioning effectively, the Dryer Lint Filter Assembly is the ideal replacement to restore your dryer's optimal performance and extend its lifespan. Trust in this genuine OEM part to maintain the safety and efficiency of your Samsung dryer.

The Lint Trap is an OEM part for Frigidaire dryers. It helps in capturing lint and debris generated during the drying process, preventing them from clogging the dryer vent and exhaust system.

Causes of a clogged or faulty lint trap can include excessive lint accumulation, damage to the trap screen, or improper installation.

Symptoms of a bad lint trap may include:

• Longer drying times
• Reduced drying efficiency
• Visible lint accumulation in the dryer drum or on clothes
• Excessive heat inside the dryer

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Color: white. It measures about 13 inches wide by 11-1/2 inches high.

The Lint Filter Assembly is an OEM part for GE dryers. This part captures lint and debris from the air flowing through the dryer, preventing these particles from clogging the vent and ensuring efficient airflow.  

Causes of a bad lint filter assembly can include physical damage such as cracks or breaks, wear and tear from regular use, or clogging from excessive lint buildup that can't be cleaned effectively.

Symptoms of a bad lint filter assembly include:

• Lint buildup on clothes after drying
• Longer drying times
• The dryer overheating
• Visible damage or warping of the filter assembly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This lint screen cover installs in the dryer's door opening over the lint filter. It holds the screen securely and directs airflow through it to capture lint and help protect fabrics as items pass the opening.

• Secures the lint screen in the door opening/front bulkhead so it seats correctly
• Directs airflow through the lint filter for proper lint collection and drying performance
• Smooths the filter opening to help prevent clothes from catching
• Replace if the cover is cracked, warped, loose, or missing, or if you notice lint escaping, longer dry times, or snagged items near the filter area

• Disconnect power; for gas dryers, also shut off the gas supply
• Open the door, remove the mounting screws, and lift off the old cover
• Position the new cover and reinstall screws; do not overtighten to avoid cracking
• Verify the lint screen slides and seats properly, then run a short test cycle

The Filter and Mesh Assembly is an OEM part for dryers. This part captures lint and other debris from the air stream during the drying cycle, preventing it from clogging the dryer's internal components or being expelled into the surrounding area.

Causes of a bad filter include excessive lint buildup, damage from mishandling, or general wear and tear over time.

Symptoms of a bad filter and mesh assembly include:

• Clothes taking longer to dry
• Restricted airflow from the dryer
• Overheating or excessive heat buildup
• Visible lint accumulation around the dryer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Lint Filter is an OEM replacement part for GE dryers. This lint filter is designed to trap lint and debris from clothing during the drying cycle, preventing it from entering the dryer's exhaust system. By capturing lint, the filter helps maintain airflow efficiency, ensuring optimal drying performance and reducing the risk of fire hazards.

Over time, lint filters can become worn, torn, or clogged due to regular use. A damaged or ineffective filter may allow lint to bypass the trap, potentially clogging the vent system and impacting dryer efficiency.

Symptoms of a bad lint filter include:

• Visible tears or holes in the filter mesh
• Excessive lint buildup in the dryer drum or vent
• Longer drying times or reduced drying efficiency
• Difficulty fitting the filter securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Lint Filter is an OEM component specifically designed for Bosch dryers. Located inside the dryer door, it prevents lint and other debris from escaping into the surrounding area. 

Symptoms of a bad dryer lint filter include:

• Reduced airflow and inefficient drying times  
• Lint accumulation inside the dryer drum and ductwork
• Excess lint in the surrounding area and on clothes 

Causes of a bad lint filter can include normal wear and tear over time, or damage such as cracks or tears that compromise filtration. Failure to clean after each use also contributes to eventual clogging.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This lint filter traps lint and fibers as air moves through the dryer, helping maintain proper airflow and drying performance. Replace a damaged or missing screen to reduce lint buildup inside the machine and along the vent.

• Captures lint and debris during the drying cycle to protect the blower and venting
• Helps maintain airflow for consistent drying results and temperature control
• Reduces lint redepositing on clothes and around the door opening
• Replace if the mesh is torn, the frame is warped/cracked, or if you notice longer dry times or excess lint inside the drum

• Disconnect power before servicing
• Remove the old screen and vacuum out the lint chute/housing; inspect and clean the exhaust vent as needed
• Insert the new filter and ensure it seats fully and flush—do not operate the dryer without the filter in place
• Run a short test cycle to confirm proper airflow at the exhaust

This EMI line filter reduces electrical interference on the incoming power to help protect the appliance's electronics and ensure stable operation. A failed filter can leave the unit dead, intermittently power-cycling, or tripping a breaker.

• Filters electromagnetic interference (EMI) on the AC line
• Helps protect the control board and other sensitive circuits
• Common symptoms: no power, intermittent power, or breaker/fuse trips when the unit starts
• Typically located near the power-cord entry or main control

• Disconnect power before servicing; allow a few minutes for any capacitors to discharge
• Note and label wire positions; move wires one at a time to the new filter
• Secure the filter to its mounting bracket and ensure the ground connection is tight
• Inspect wiring for shorts or damage before restoring power and testing

This line noise filter conditions incoming AC power by reducing electromagnetic interference before it reaches the appliance's electronics. Replacing a shorted or damaged filter can restore stable operation and help prevent erratic control behavior.

• Filters EMI/RFI on the power line before it reaches the control system
• Helps protect sensitive electronics from interference and voltage spikes
• Failure may present as no power, intermittent resets, or nuisance GFCI/breaker trips
• Typically mounted near the power-cord entry; also called a line filter

• Disconnect power and allow any capacitors to discharge before servicing
• Note wire positions and line vs. load orientation; take a photo before removal
• Secure the ground and mount the new filter firmly to the chassis
• Route and reconnect wires carefully to avoid pinching; reassemble and test

This dryer lint filter, also called a lint screen, captures lint and debris from the exhaust air stream. Replacing a damaged or missing screen helps restore proper airflow, improve drying consistency, and protect the blower and vent.

• Traps lint and fibers from tumbling laundry to keep them out of the blower and vent
• Helps maintain proper airflow for consistent drying performance
• Aids in preventing lint buildup inside the dryer and exhaust duct
• Typical failure symptoms: torn mesh, cracked/warped frame, lint on clothes, longer dry times

• Disconnect power; for gas dryers, turn off gas supply
• Remove the old filter and vacuum lint from the housing/duct opening
• Insert the new filter fully in the correct orientation; never operate the dryer without the filter installed
• Run a brief test cycle to ensure proper fit and airflow

This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.

• Connects water tubing between components within the appliance's water system
• Helps maintain a tight, leak-resistant seal at the joint
• Restores proper water flow when a tube or connector is damaged
• Typical symptoms: water leaking at the connection, reduced or no water flow, visible cracks/kinks, loose fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch any residual water
• Note routing and orientation before removal to ensure correct reassembly
• After installation, restore water and check all connections for leaks

This lint filter assembly traps lint and fibers from the exhaust airstream to maintain proper airflow and drying performance. Replace a torn or missing screen to help restore efficiency and reduce lint buildup inside the appliance and vent. What it does:

• Screens lint and debris from air leaving the drum
• Helps maintain airflow for consistent drying
• Helps keep lint out of the blower and vent path
• Common signs it's time to replace: torn mesh, cracked/warped frame, poor fit, excessive lint beyond the filter, longer dry times

• 1 lint filter assembly

• Disconnect power before service and allow the unit to cool
• Remove the old filter; vacuum/clean the lint housing and chute
• Insert the new filter fully and ensure it seats and moves smoothly
• Do not operate the appliance without the filter installed

This replacement lint filter fits in the dryer's lint trap to catch lint and fibers from each load. Replacing a torn or warped screen helps maintain airflow, improves drying performance, and keeps lint from circulating back onto clothes.

• Traps lint and debris drawn through the lint trap during drying
• Helps maintain proper airflow and protect the blower and vent path
• Replace if the mesh is torn, the frame is cracked/warped, or it won't stay seated
• Common symptoms: longer dry times, excessive lint on clothing or in the drum, difficulty inserting/removing the filter

• Disconnect power to the dryer before servicing
• Lift out the old filter and vacuum lint from the chute and surrounding area
• Install the new filter fully seated and flush in the opening; do not run the dryer without a filter
• Clean the lint screen before each cycle; check external venting if dry times remain long

The Filter is an OEM part for Whirlpool dryers. This lint filter catches loose fluff and lint before it escapes outside and helps prevent blockages in the vent ductwork. 

Causes of a clogged dryer filter involve normal buildup during frequent drying cycles over extended use. Signs of failure include:

• Drying times taking too long as airflow is impeded
• The dryer failing to properly sense airflow for thermal protection
• Strange noises or vibrations from restricted ventilation

Symptoms of a dirty filter consist of:

• Reduced air movement through vents and out of the dryer
• Red eyes, sinus issues or respiratory irritation from lint recirculating
• Clumps of fluff visible clinging within exhaust hoods and ducts

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.