Frigidaire Gasket & Seal

This O-ring is a small rubber seal that prevents water or air leaks at a connection point. It restores a tight seal so appliance lines and fittings work reliably and avoid drips or pooling. What it does:

• Seals joints and fittings to stop water or air from leaking
• Commonly replaced when a connection shows visible leaking or moisture
• Helps restore proper water flow and pressure by removing escape paths
• Useful when replacing related fittings, valves, or tubing to ensure a leak-free seal

• Disconnect power and shut off water supply before replacing the O-ring
• Remove the old O-ring, clean the sealing surfaces, and inspect for damage before installing the new ring
• Lightly lubricate with a water-safe (non-petroleum) lubricant if needed to ease installation and prevent pinching

This glider replaces a worn or broken drawer slide to restore smooth movement and proper alignment for refrigerator drawers. It helps the drawer open and close evenly so stored items stay secure and accessible. What it does

• Supports and guides the drawer as it slides in and out of the cabinet
• Replaces a cracked, worn, or missing glider that causes sticking or uneven travel
• Helps prevent drawer wobble and keeps the drawer aligned on its track
• Compatible with common refrigerator drawer assemblies that use a small plastic/nylon glider

• Basic hand tools may be needed; remove the drawer to access the glider mounting area
• Align the glider with the track and snap or fasten into place per the original hardware
• Inspect adjacent slides and tracks for wear and replace if damaged to ensure smooth operation
• Disconnect power and remove food from drawers before disassembly if working near electrical components

The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer. 

Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.  

Symptoms of a bad Front Felt Glide Assembly include:

• Unusual noises during operation, such as squeaking or grinding
• The dryer drum may catch or hesitate during rotation
• Increased wear and tear on clothing due to the drum's rough movement
• The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Gasket is an OEM part for Frigidaire refrigerators. It forms a seal around the refrigerator or freezer door, preventing warm air from entering and cold air from escaping, thus maintaining the optimal internal temperature and ensuring energy efficiency. This gasket measures approximately 40.62" x 21.12". 

Common causes of a bad gasket include frequent use, exposure to spills, or wear and tear over time. A compromised gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad gasket include:

• The door not sealing properly
• Increased frost buildup inside the refrigerator or freezer
• Warmer than usual temperatures inside the appliance
• Higher energy bills due to the refrigerator working harder to maintain cool temperatures

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Color: White

The Freezer Door Gasket is an OEM part for Frigidaire refrigerators. This gasket creates a seal around the freezer door to prevent warm air from entering and cold air from escaping, ensuring the freezer maintains its optimal temperature.

Causes of a bad freezer door gasket can include wear and tear over time, exposure to harsh cleaning chemicals that degrade the material, or physical damage from frequent use or mishandling.

Symptoms of a bad freezer door gasket include:

• Noticeable gaps or cracks in the gasket
• Frost buildup inside the freezer
• Increased energy consumption
• The freezer door not closing properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. This gasket forms a seal around the refrigerator door, ensuring that cold air stays inside and warm air remains outside, maintaining the appliance's efficiency and keeping food fresh.The gasket measures approximately 44.6" X 30.69"

Causes of a bad door gasket can include regular wear and tear, mold or mildew buildup, and physical damage from repeated opening and closing of the door. 

Symptoms of a bad refrigerator door gasket include:

• Warm air entering the refrigerator, causing it to run more frequently
• Condensation or frost buildup inside the refrigerator
• Difficulty keeping the door closed
• Visible cracks, tears, or deformation in the gasket

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Gasket is an OEM part for Frigidaire freezers. This gasket forms a seal around the door, ensuring that cold air stays inside while keeping warm air out.  

Causes of a bad gasket can include regular wear and tear from frequent opening and closing of the door, exposure to extreme temperatures, and physical damage from impacts.

Symptoms of a bad door gasket include:

• Frost buildup around the door edges
• Increased freezer temperature or inconsistent cooling
• Excessive energy consumption
• The door not sealing properly or appearing misaligned

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement part is a door gasket, and it is intended for use in refrigerators and freezers. This is a genuine replacement part made by Frigidaire. This gasket is an important part of any fridge or freezer. This part is used around the lining of the fridge doors so that the appliance is sealed shut when not in use. This is important so that the cool air stays inside and is able to keep the food and other items at the correct temperature. A new gasket lining might be needed if the current one is visibly falling off or not attached any longer. The gasket might have a leak or be coming apart at different areas on the appliance. Simple check around the lining of the gasket to check if there are any visible gaps. If the appliance is not staying at the correct temperature it can also be because the gasket is not connected properly.No special tools should be needed for this repair as the user should be able to simply attach the gasket around the appliance. Note that this is a genuine OEM replacement part and is told individually.