General Electric Refrigerator Filter

This manifold assembly routes and distributes incoming wash water to the dishwasher's spray arms and wash zones, restoring proper water flow for effective cleaning. Designed to replace a worn, cracked, or leaking manifold and return consistent wash performance. What it does:

• Directs incoming water to the spray arms and wash chamber for normal wash cycles
• Replaces cracked or damaged manifold that can cause leaks or weak spray performance
• Helps restore proper water flow when one or more spray arms receive little or no water
• Works with the dishwasher's valves and hoses to maintain sealed water pathways

• One manifold assembly

• Turn off power and water to the appliance before beginning repair
• Inspect and replace any worn O-rings, gaskets or hoses when installing the manifold
• Tighten fittings to manufacturer torque recommendations and test for leaks after reconnecting water

This fine mesh dishwasher filter captures food particles to help protect the pump and improve wash performance. It replaces a worn or clogged filter so water can drain and spray properly for cleaner dishes. What it does:

• Traps food debris and large particles from the wash sump to prevent pump and spray-arm clogs
• Helps maintain proper water circulation and drainage for better cleaning
• Reduces recirculation of soil during the wash cycle
• Commonly replaced when the filter is torn, heavily clogged, or causing drainage/noise issues

• One fine mesh dishwasher tub filter

• Turn off power to the appliance before inspecting or replacing the filter
• Remove lower rack to access the filter; follow OEM diagram for correct orientation
• Clean surrounding area and check for trapped debris in the sump before installing the new filter

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air

Water filter removes contaminants and turbidity from the water supply to improve quality. For optimal performance, filter should be replaced regularly. Quick, simple installation requires no special tools.

When replacing the original metal canister design (Water by Culligan) filter for the first time, this adapter needs to be installed. The adapter is reusable, so there is no need to replace it the next time you replace the filter. For filter order MWFP.

Water filter head and tubing assembly holds the water filter and connects the water lines to the water filter. Approximate dimensions: 10.5" x 10.4" x 4.6"

This shower replacement filter can be used with the GE GXSM01HWW shower filter unit. Reduces the effects of chlorine on skin and hair and has a filter capacity of 10,000 gallons or six months. This shower replacement is NSF/ ANSI Standard 177 Tested and Certified. Carbon spun fiber filtration. Flow rate: 3 to 10 gallons per minute.

Approximate dimensions: 15.3" x 4" x 4"

Lower

The water filter cover attaches over the water filter and protects the water filter and head. Approximate dimensions: 7" x 7" x 2.6"

This replacement water filter cover restores the exterior trim that secures and protects the refrigerator's water filter, keeping the filter seated and helping prevent debris or light leaks around the filter area. What it does:

• Covers and secures the water filter housing so the filter stays properly seated
• Protects the filter from dirt and accidental contact
• Helps maintain a finished appearance at the filter access point
• A damaged or missing cover can allow the filter to shift or create visible gaps at the housing

• Turn off the water supply and follow refrigerator power/safety instructions before servicing
• Remove the old cover by releasing any clips or screws, then snap or fasten the replacement into place
• Verify the filter is properly seated and check for leaks after restoring water/power

This water filter cover is the replacement housing that secures and seals the refrigerator's water filter cartridge, keeping the filter in place and helping prevent leaks and debris entry. Restores proper fit and appearance. What it does:

• Secures the water filter cartridge in the filter bay to maintain a proper seal
• Helps direct water flow to and from the filter for normal dispensing and icemaking
• Protects the filter from dust and debris that can affect water quality
• Can reduce or stop minor leaks caused by a cracked or missing cover
• Restores the finished look of the filter area

• One water filter cover

• Turn off refrigerator water supply and dispense any remaining water before starting
• Disconnect power or follow manufacturer safety instructions to avoid electrical hazard
• Typically installs by aligning and snapping or fastening into the filter compartment; keep original fasteners if present
• After installation, turn water back on and check for leaks; run water through dispenser to purge air

Water filter removes contaminants such as lead, sediment, cysts, and chlorine from the refrigerator water supply. For optimal performance, filter should be replaced every six months. Quick, simple installation requires no special tools. This water filter fits select GE refrigerators. Certified to reduce Class I Particulates.