General Electric Refrigerator Leg Or Foot

This wheel axle secures a small drawer, bin, or shelf wheel to its rail or bracket in compatible refrigerators, helping restore smooth gliding and proper alignment when the original axle is worn, cracked, or missing.

• Holds the wheel in place so drawers/bins roll smoothly along their tracks
• Helps maintain alignment and prevents wobble or binding
• Replace if the axle is broken, loose, or the wheel repeatedly falls off
• Symptoms can include stiff or uneven drawer movement, scraping, or a missing wheel/axle

• Unplug the refrigerator and remove food from the affected drawer/bin
• Remove the drawer/shelf to access the wheel and axle
• Use needle-nose pliers to release and remove the damaged axle; align components and press the new axle fully into place
• Inspect the wheel and track; replace any worn parts to ensure smooth operation

Replacement roller assembly that supports your refrigerator crisper or vegetable drawer. Restores smooth sliding when original roller is worn, broken, or cracked.

Support roller for refrigerator crisper or vegetable drawer. Installs on drawer track to enable smooth sliding. Replace when cracked, broken, or worn.

Supports and guides your refrigerator storage drawer. Replace if cracked, broken, or worn to restore smooth sliding and stability. Installs behind the drawer.

This rear wheel roller replaces a worn or damaged drawer/glide wheel to restore smooth movement and reduce sticking or noise. Durable molded construction fits the rear guide position to help support and steady the sliding drawer or bin. What it does

• Supports and guides the appliance drawer or bin for smooth in-and-out motion
• Replaces cracked, chipped, or worn rear wheel that causes binding or catching
• Helps reduce squeaks and uneven movement from a damaged roller
• Restores proper alignment and load support at the rear glide point

• One rear wheel (roller)

• Disconnect power and remove the drawer/bin per your owner's manual before replacing the wheel
• Typically installs by snapping or sliding into the rear glide bracket; basic hand tools may be needed
• Inspect mating tracks or brackets for damage and clean debris before installing the new wheel

This rear wheel assembly replaces a worn or broken refrigerator drawer roller to restore smooth, stable movement and proper drawer alignment. It helps prevent sticking, scraping, and uneven wear on the drawer track. What it does:

• Replaces a damaged rear roller so the drawer opens and closes smoothly
• Keeps the drawer aligned and prevents it from binding or tilting
• Reduces scraping and uneven wear on the drawer and track
• Supports normal load on the rear of the drawer for stable operation

• Remove drawer contents and slide the drawer out according to your appliance manual before starting
• Inspect the front and rear tracks; replace only the damaged roller(s) and test drawer movement after installation
• Use basic hand tools; avoid forcing parts
• No special wiring or electronic handling required; follow general safety precautions

The refrigerator leveling screw is an adjustable threaded leg located at the bottom corner of your refrigerator that lets you raise or lower that corner to achieve a level, stable position. Proper leveling ensures the doors swing shut on their own and that the refrigerator runs efficiently. Replace or adjust this part if your refrigerator rocks on the floor, the doors won't stay closed, or you notice uneven gaps around the door seals.

Front wheel frame assembly for refrigerators. Mounts on the bottom front of the unit to support the roller wheels. Replace if cracked, broken, or missing.

Rear caster wheel assembly for refrigerators. Mounts under the back of the unit to provide smooth rolling mobility. Replace if cracked, broken, or worn.

This is a small axle pin or rivet that supports a caster or roller wheel on the refrigerator. It allows components such as drawer slides or leveling wheels to roll smoothly. Replace this axle if a wheel wobbles, falls off, or no longer spins freely, causing drawers to stick or the refrigerator to be difficult to move or level.

Support roller for refrigerator pantry drawers. Installs underneath drawer to enable smooth gliding. Replace if cracked, worn, or causing drawer misalignment.

Front wheel assembly for refrigerators. Mounts to the base for smooth rolling and leveling. Replace if cracked, worn, or missing for proper mobility.

Replace your refrigerator's broken or missing adjustable leveling leg assembly. Installs at the base to support and level your unit properly.

Caster assembly installs on the bottom of your refrigerator to enable smooth rolling and movement. Replace if cracked, broken, or wheels no longer roll.

Refrigerator roller wheel that mounts to the bottom front of your fridge. Replace if cracked, worn, or no longer rolls smoothly for easy movement.

Replaces worn or damaged refrigerator roller wheels that make moving your appliance difficult. Restores smooth rolling for easy cleaning access.