Grate, Grate Feet, Griddle

The Surface Burner Grate is an OEM part for Whirlpool ranges. It provides support and stability for your cookware while evenly distributing heat for efficient cooking.

A bad surface burner grate can be caused by regular use, accidental damage, or wear and tear over time. If you notice issues such as a cracked or warped grate, difficulty in placing or removing cookware, or uneven heating on the stovetop, it may indicate a problem with the surface burner grate.

Symptoms of a bad surface burner grate include:

• Uneven heating or hot spots on the stovetop
• Instability or wobbling of cookware during cooking
• Difficulty in cleaning due to damaged or warped grate surfaces

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This cast-iron surface burner grate supports pots and pans above the flame for safe, even cooking. Replace a warped or broken grate to restore a stable, level cooking surface and proper pan height over the burner.

• Supports cookware at the correct height above surface burner flames for efficient heating
• Provides a stable, level platform to reduce wobbling or tipping
• Helps center pots and pans over the burner
• Common signs to replace: cracked or broken grate bars, warping, missing grate, or unstable cookware

• Turn all burners off and allow the cooktop to cool completely before handling
• Lift off the old grate and clean the area of debris or spills
• Set the new grate in place, aligning with burner components and cooktop guides
• Confirm the grate sits level and does not rock before use

The Burner Grate is an OEM replacement part for Frigidaire ranges and cooktops. The burner grate distributes heat evenly across the base of cookware while allowing for easy viewing of cooking progress underneath. 

Causes of a bad burner grate can include warping, bending, rusting or cracking due to long-term high heat exposure. If left unaddressed, severely damaged grates can pose a safety concern.

Symptoms of a bad burner grate include:

• Unstable or uneven grill surfaces 
• Difficulty centering pots and pans properly
• Hot spots under cookware causing food to scorch 
• Grill bars dislodging or falling during cooking

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Burner Grate is an OEM part for GE ranges. It provides a stable and durable surface to hold cookware above the burner, ensuring even heat distribution during cooking.

The burner grate should be replaced if it becomes damaged or worn out. Causes of a bad burner grate can include prolonged exposure to high heat, accidental impacts, or the enamel coating wearing off over time.

Symptoms of a bad burner grate include:

• The grate becoming unstable or wobbly
• Visible cracks or chips in the material
• Difficulty in positioning cookware securely
• Uneven cooking due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black. It measures about 8-1/2 inches wide by 9 inches deep. For GRATE FEET only, order part# WB2K101

This burner grates provide a stable surface on which to balance cookware and keep it squarely over the top of the flame on a gas range. This particular set includes all of the grates required to cover the burners on compatible range models. Over time, burner grates might become worn, dented, bent, corroded, or simply too damaged or dirty to use. No tools are needed to replace this part. Remove the old grates and slot the new ones into place. This part is a genuine OEM replacement burner grate set intended for use with gas range models. This part has been made by General Electric and has been sourced directly from the manufacturer. This part is made out of high-quality, durable, non-corrosive metal to ensure durability. This burner grate set is sold individually. It is intended for use with gas ranges manufactured by General Electric, Hotpoint, RCA, and other brands.

This replacement burner grate assembly restores a stable, level cooking surface so your cookware sits securely over the burners. Replace a worn, cracked, or missing grate to improve safety and everyday cooking performance.

• Supports pots and pans at the correct height over the flame for consistent heating
• Keeps cookware stable to help prevent rocking or tipping
• Replaces damaged, warped, or broken grates that can compromise results
• Refreshes the cooktop's appearance after heavy wear or discoloration

• Allow the cooktop and old grate to cool completely before handling
• Lift off the old grate and clean the support area of spills or debris
• Set the new grate in place, aligning feet/locator tabs so it sits flat without wobble
• Avoid dropping or sliding the grate to prevent chipping or surface scratches

For GRATE FEET only, order part# WB2K101

Color: Black. Includes one double grate. For gray order WPW10180089.

This replacement grill grate restores a sturdy, level grilling surface on your cooktop or range. Replace a cracked, warped, or missing grate to maintain safe support and consistent heat over the grill area.

• Provides the elevated grilling surface above the heat source for stable, even cooking
• Keeps food positioned at the proper height for consistent searing and results
• Replace if cracked, broken, warped, or heavily corroded
• Helps resolve rocking/unstable surface or uneven cooking caused by a damaged grate

• Turn appliance off and allow all surfaces to cool completely before handling
• Lift off the old grate and clean debris from the support ledges or frame
• Set the new grate in the correct orientation; ensure it sits flat and stable
• Verify proper clearance around adjacent components before use

The burner grate is an OEM part for Whirlpool gas ranges. This grill component sits above the burners to provide an elevated grilling and warming surface. 

Causes of a bad burner grate can include warping or damage from high heat over time, worn or broken tie bars allowing unstable movement, or surface deterioration that makes normal cooking unsafe.

Symptoms of a bad burner grate include: 

• Wobbly or loose resting above the burners
• Pits, sharp edges, or thin spots on the grilling surface  
• Rust or deterioration of structural integrity
• Difficulty removing or installing due to tie bar issues

This OEM part fits select Whirlpool, Maytag, KitchenAid, Jenn-Air,  and Amana models.

A cast cooktop grate that supports pots and pans over a burner and restores a stable cooking surface. Replaces a worn, cracked, or missing grate so cookware sits level for safer, more consistent stovetop use. What it does:

• Supports cookware above the burner for stable heating and safer cooking
• Replaces cracked, broken, or warped grates that let pots wobble or slide
• Restores proper spacing for burner caps and cookware contact
• Durable cast construction resists heat and everyday wear

• Always turn off burners and allow the cooktop to cool completely before handling
• Remove the old grate and set the replacement grate in place, aligning feet over the burner ports
• No special tools typically required; inspect for proper seating and any cracked pieces before use
• Clean grease and debris from the cooktop surface before reinstalling to ensure a stable fit

This surface burner grate is a heavy-duty cast-iron support for cookware on your gas range or cooktop. Replacing a damaged grate restores a stable, level cooking surface and proper pan height over the flame. What it does:

• Supports pots and pans at the correct height above the burner
• Replaces cracked, warped, chipped, or broken grates that cause wobbling or instability
• Helps keep cookware level for consistent heating
• Cast-iron construction withstands high, repeated heat cycles

• One cast-iron burner grate

• Turn off burners and allow the cooktop to cool completely before servicing
• Lift off the old grate and clean the mounting surface if needed
• Position the new grate in the same orientation so it sits flat and fully seated
• Verify pan stability before lighting a burner

This includes one single foot. For the four pack order part number 00413552

The Burner Grate Kit is an OEM replacement part for Whirlpool gas cooktops. It is designed to provide a stable and durable surface for your pots and pans. It provides even heat distribution and prevents cookware from tipping during cooking. 

A bad burner grate kit can occur due to wear and tear, damage, or improper cleaning. If you notice symptoms such as wobbly or unstable pots and pans, discoloration or rust on the grates, or difficulty in maintaining a steady flame, it may be time to replace the burner grate kit.

Symptoms of a bad burner grate kit include:

• Wobbly or unstable pots and pans during cooking
• Discoloration or rust on the grates
• Uneven flame or difficulty in maintaining a steady heat

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.