Transformer

The Transformer is an OEM part for GE gas cooktops. This component is responsible for converting electrical power to the necessary voltage required for the cooktop's ignition system to function correctly.

Replace this transformer if it fails to supply the proper voltage, leading to ignition issues. Common causes of a bad transformer include electrical surges, overheating, or normal wear and tear over time.

Symptoms of a bad Gas Cooktop Transformer include:

• Burners not igniting or taking longer to ignite
• Clicking sound without ignition
• No power to the ignition system
• Flickering or inconsistent burner flames

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Inverter is an OEM replacment part for Whirlpool microwaves. It regulates the magnitude and duration of electromagnetic waves generated during cooking functions.  

Causes of a faulty inverter can include general wear from prolonged use or damage from power surges entering the microwave.

Symptoms include:

• Inconsistent or incomplete heating of foods  
• Sparking or burning smells emanating from within
• Control panel errors or failure to properly sense wattage settings

This OEM Whirlpool replacement ensures precise electromagnetic wave output. Compatible with KitchenAid, Maytag, Jenn-Air, and select other branded microwaves, the inverter restores consistent cooking performance.

This high-voltage transformer steps household power up to the level needed to energize the magnetron. Replacing a failing transformer can restore consistent microwave heating and reduce excessive humming under load. What it does and common symptoms:

• Steps up AC line voltage to power the magnetron through the high-voltage circuit
• Microwave runs but does not heat food
• Loud humming or buzzing when a cycle starts
• Blows internal fuse or trips breaker immediately after pressing Start (can also be caused by other HV components)

• 1 high-voltage transformer

• Disconnect power; microwave high-voltage components can retain a lethal charge
• Discharge the high-voltage capacitor before handling any internal parts
• Note and photo-document wire positions; transfer one lead at a time to avoid miswiring
• Support the transformer's weight during removal/installation and reuse original mounting hardware and insulators

• "No heat" can also result from a failed magnetron, HV diode, or HV capacitor; diagnose related components before replacing the transformer.

This light transformer (20VA) steps down incoming voltage for the appliance's light circuit. Replace a failing transformer to restore dependable illumination so you can monitor cooking progress and see clearly when cleaning.

• Steps down line voltage to the lower voltage used by the light circuit
• Supports consistent, reliable interior lighting
• A failed transformer can leave the light inoperative even with a good bulb
• Intermittent operation or flickering can indicate a weakening transformer

• Disconnect power at the breaker or unplug the unit before servicing
• Access and mounting location vary by model; note wiring and orientation before removal
• Move wires one at a time to the matching terminals/leads on the new transformer
• Secure the transformer and route wiring away from hot or moving parts; test light operation before reassembly

This replacement transformer converts household line voltage to the correct level for the appliance's control circuits. It restores stable power to the display and relays so the unit can start and run consistently.

• Converts incoming AC power to the proper voltage for electronic controls and relays
• Failure can leave the display blank and controls unresponsive even though power is supplied
• Intermittent resets or loss of functions can indicate a weakening transformer
• Replace if windings test open/shorted or the part shows overheating damage

• Disconnect power at the breaker before servicing; this part connects to line voltage
• Photograph and label wires; transfer connections one at a time to the new part
• Mount securely and route wiring away from sharp edges and hot components
• Restore power and verify the controls power up normally

The Microwave High Voltage Transformer is a vital component for restoring your microwaveGÇÖs performance. This genuine OEM part ensures reliable power conversion, maintaining optimal cooking efficiency and safety. Specifically designed for Samsung microwave models, it offers a perfect fit and straightforward installation for DIY repairs. The TRANS H.V effectively steps up the voltage, enabling your microwave to generate consistent heat for even cooking results. By choosing this genuine OEM part, you benefit from high-quality materials and precise engineering that meet SamsungGÇÖs standards. Replacing a faulty high voltage transformer with the DE26-00122B can resolve issues such as insufficient heating or complete power failure, helping to extend the lifespan of your appliance. Invest in this dependable high voltage transformer to enhance your microwaveGÇÖs functionality and enjoy seamless cooking experiences. Trust in the quality and reliability of this genuine OEM part to keep your microwave running smoothly and efficiently.

High-voltage transformer that supplies the elevated voltage required by the appliance's high-voltage circuit. Replacing a failed transformer restores proper high-voltage operation and helps resolve related heating or ignition issues. What it does

• Steps up household voltage to the higher voltage used by the appliance's high-voltage components.
• Common symptoms of failure: no or weak heating, loud buzzing, arcing or burning smell, and blown fuses or tripped breakers.
• Replaces the original high-voltage component to restore the appliance's high-voltage function.
• If symptoms persist after replacement, check the high-voltage capacitor, diode and related components.

• Always disconnect power before servicing; this part is used in high-voltage circuits.
• High-voltage capacitors can hold a lethal charge—discharge capacitors and use insulated tools.
• Verify wiring and secure mounting; use the OEM wiring configuration and replace damaged insulators or hardware.
• After installation, test the appliance for correct operation and listen/inspect for arcing or unusual noises.

Control transformer that provides stable low-voltage power to the washer's control and user interface, ensuring reliable electrical signaling so cycles start and the machine operates correctly. What it does:

• Supplies the control board and user controls with the required control voltage.
• Restores power to displays, timers, and electronic controls when the transformer has failed.
• Common symptom: machine is dead, display is blank, or cycles won't start.
• Can cause intermittent power or control glitches before full failure.

• Disconnect power before servicing to avoid shock—follow lockout/tagout if required.
• Compare part number and mounting style to the original before installation.
• Handle terminals and wiring carefully; secure all connections and mounting hardware.

Replacement transformer that restores power to low-voltage components in compatible Broan ventilation appliances, helping lights and control circuits operate correctly. Install the correct PN match to return normal lighting and control function. What it does

• Converts incoming power to the voltage required by low-voltage lights and control circuits in compatible Broan ventilation products.
• Replaces failed or damaged transformers that cause no power, intermittent operation, or flickering lights.
• Stops symptoms such as lights that won't turn on, intermittent lighting, or unresponsive control circuits when the transformer is the fault.
• Fits as a direct replacement when matching the appliance model and part number.

• Always disconnect electrical power at the breaker before inspecting or replacing electrical parts.
• Match wiring colors and connector types; secure all connections and grounding per OEM instructions.

This lamp ballast is the replacement lighting module that powers and stabilizes the oven/microwave/upper-cabinet light for consistent illumination. Replacing a failed ballast restores a flickering or non-working interior light for safe, visible cooking. What it does:

• Regulates power to the appliance light so the bulb or LED stays on steadily
• Commonly fixes symptoms like a light that flickers, stays dark, or works intermittently
• Works with the appliance's existing lamp socket and wiring harness
• Provides a direct replacement for the original ballast used in compatible units

• One lamp ballast

• Disconnect power to the appliance before starting — turn off breaker or unplug
• Handle gently and avoid bending terminals or damaging the wiring harness
• Reassemble panels and secure mounting fasteners before restoring power

This transformer converts incoming household voltage to the specific levels needed by your appliance's circuits and components. Replacing a failed unit restores stable power delivery so controls and critical loads operate correctly and safely. What it does

• Steps line voltage up or down to supply connected circuits
• Provides isolated, stable power for control or heating components
• Failure symptoms include: unit won't power on or run, internal fuse repeatedly blows, loud humming/buzzing, or signs of overheating near the transformer

• 1 transformer assembly

• Disconnect power at the breaker and before servicing
• Label or photograph wire locations and move leads one at a time to matching terminals
• Inspect related fuses, wiring, and connectors before reapplying power

This microwave high-voltage transformer steps household AC up to the high voltage required by the magnetron to generate microwave energy. Replacing a failed transformer restores heat when the oven runs but food remains cold.

• Steps up line voltage to supply the magnetron during cooking
• Common symptom of failure: microwave runs but does not heat
• May also cause loud humming, a burning odor, or tripped breaker/fuse when energized
• Visual signs can include scorching or discoloration on the windings or terminals

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge it before servicing
• High-voltage microwave repairs are hazardous
• Note wire positions and mounting orientation before removal; transfer any brackets or insulators as configured
• Secure with original hardware and verify all connections are tight and routed clear of heat or moving parts

This high-voltage transformer supplies the ignition voltage used to create sparks for gas burner/oven ignition. Replaces a worn or failed transformer to restore reliable spark firing and consistent burner ignition. What it does:

• Converts line voltage to the high-voltage pulse needed for spark ignition
• Sends ignition sparks to surface burners or oven igniters so gas will light
• Common symptom: clicking with no visible spark at the burner or burner(s) that fail to ignite
• Other symptom: intermittent ignition or weak sparking

• One high-voltage transformer

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the transformer and high-voltage leads with care; do not operate with covers removed
• Verify correct diagnosis before replacing; check ignition module, wiring, and spark electrodes for faults

This control transformer converts household line voltage to the low-voltage feed used by the appliance's control and components, restoring reliable power to timers, relays, and sensors. It's a direct-replacement electrical transformer designed for plug-and-play swap when the original is faulty. What it does:

• Steps down 120VAC line voltage to the appliance's low-voltage control circuit so controls and relays operate correctly.
• Commonly replaces a failed or intermittent transformer that causes control failures, no-power to timers, or unresponsive electronic components.
• Helps restore stable control voltage when the original transformer is noisy, overheats, or delivers inconsistent output.
• Fits the OEM mounting and wiring layout for a clean replacement without modifying existing harnesses.

• One replacement transformer

• Disconnect power at the breaker or unplug the appliance before any service—verify power is off.
• Match wiring colors and terminal positions to the original; secure all connections and use strain reliefs where present.
• Inspect mounting hardware and gaskets; replace any damaged fasteners for a secure fit.

This transformer provides the low-voltage power supply required by the appliance control system, enabling proper operation of the control board and related low-voltage circuits. Replaces a failed or noisy transformer to restore reliable control power. What it does:

• Steps down mains voltage to the appliance's low-voltage control circuit for the control board and relays
• Helps restore control functions when a failed transformer causes no power, intermittent control operation, or unresponsive electronics
• Prevents control-board brownouts by providing consistent low-voltage feed (when the transformer itself is the issue)
• Used wherever a dedicated appliance control transformer is required by the appliance's electrical system

• One replacement transformer

• Always disconnect power to the appliance before accessing electrical components
• Verify wiring locations and terminal IDs before removing the old transformer; label wires if needed
• Transfer mounting hardware and brackets from the old part unless new hardware is explicitly included

This transformer supplies the low-voltage power needed by an appliance's control system so the user interface and control board operate correctly. Replaces a worn or failed transformer to restore proper control voltage and reliable operation. What it does:

• Converts incoming line voltage to the lower control voltage used by the appliance's control board and display.
• Common symptom: control panel or display is dim, blank, or intermittently responsive.
• Common symptom: control functions (timers, cycles, lights) fail or reset unexpectedly.
• Helps stabilize control voltage to prevent erratic electronic behavior.

• One transformer

• Disconnect all power (unplug or shut off breaker) before accessing internal components.
• Observe proper wiring and polarity; match connections to the original transformer and secure terminal fasteners.
• Use appropriate mounting hardware and strain reliefs; avoid pinching or exposing wires.