Grate, Grate Feet, Griddle

A heavy-duty cast-iron cooktop grate that supports cookware above gas burners for stable, even heating. Replaces worn or damaged grates to restore pot stability and proper burner clearance. What it does:

• Supports pots and pans over the burner for safe cooking
• Maintains proper clearance for even flame contact and heat distribution
• Restores stability when original grate is cracked, warped, or missing
• Resists high heat and everyday wear for long-lasting use

• One cast-iron cooktop grate

• Allow cooktop to cool completely before removing or installing the grate
• Position the grate securely on the burner supports; no tools required in most models
• Clean with warm soapy water and avoid abrasive cleaners that can damage the finish
• Do not use if the grate is cracked or severely damaged — replace to prevent instability or safety hazards

Size: 19 1/16 inches x 10 3/4 inches. This Jenn-air Designer Line non-stick aluminum electric griddle accessory fits over electric grill elements and has two drain holes on the one end to make ease of separating the grease from the food.

Cooktop grate assembly that supports cookware over gas burners, restoring a stable, level cooking surface and proper burner contact. Replaces damaged or warped grates to help reduce wobbling and improve cooking consistency. What it does:

• Provides a stable platform for pots and pans above gas burners
• Positions cookware for correct flame contact and more even heating
• Replaces cracked, chipped, or warped grates that can cause wobbling or unstable cookware
• Helps prevent pans from tipping and keeps the cooktop surface functioning as intended

• Allow the range and burners to cool completely before removing or installing the grate
• Typically installs by lifting the old grate off and seating the replacement into place—no special tools required
• Verify correct seating around the burner caps so flames are not obstructed

This replacement cooktop grate assembly restores a stable cooking surface for gas ranges, letting cookware sit level and burners operate safely. It replaces damaged or worn grates to help prevent pans from wobbling and improve usability. What it does:

• Supports pots and pans securely over the burner for safer cooking
• Replaces cracked, chipped, or warped grates that cause instability
• Helps burners and cookware align properly for consistent heat contact
• Restores the cooktop's original appearance and functionality

• Turn off the appliance and allow the cooktop to cool completely before handling
• Lift out the old grate and set the new grate into place; ensure it seats flat and stable
• No wiring or gas-line disconnection is required for grate replacement

Color: Black

This is a replacement black burner grate for gas ranges. It provides a stable cooking surface so pots and pans sit securely over the burner, restoring safe, even cookware support. What it does:

• Supports pots and pans above the burner for stable cooking
• Restores proper pot-to-flame positioning for consistent heating
• Replaces warped, cracked, chipped or missing grates that cause cookware wobble
• Protects the cooktop surface from direct contact with hot cookware

• Designed for drop-in replacement; no special tools usually required
• Allow the cooktop and grate to cool completely before handling
• Inspect burners and ports for debris before reinstalling the grate
• If you smell gas or detect a problem with burner operation, stop use and have the appliance serviced.

This cast cooktop grate replaces a damaged or worn right-side burner support, restoring a stable surface for pots and pans and helping burners heat cookware evenly. Durable cast construction resists warping from high-heat cooking. What it does:

• Supports cookware over the right burner so pots and pans sit level while cooking
• Provides a stable, heat-resistant surface that withstands regular stovetop use
• Helps maintain proper burner flame contact and consistent cooking performance
• Replaces cracked, chipped or misshapen grates that can cause instability or uneven heating

• Replace only when cooktop is cool and all controls are off; handle grate carefully—cast parts can be heavy
• No tools typically required; simply lift out the old grate and set the replacement in position
• Clean grate with non-abrasive cleaners; avoid harsh chemicals that may damage finishes

Please note: These are a dark grey replacing light grey

This replacement grate cartridge secures and centers a cooktop burner grate so cookware sits level and burners perform as intended. Durable design restores stable support for pots and pans on compatible gas ranges. What it does:

• Replaces a worn or broken grate cartridge that lets the grate rock or sit unevenly
• Helps keep the burner grate properly aligned over the burner for even cooking
• Prevents cookware from wobbling or shifting during use
• Restores proper fit where the grate attaches to the cooktop surface

• One grate assembly (cartridge) as shown

• Turn off and disconnect power and gas supply; allow the range to cool completely before servicing
• Remove the burner grate and lift out the old cartridge; align tabs and snap or seat the new cartridge into place
• Handle enamel-coated grates carefully to avoid chipping; use soft padding if needed during installation

This replacement cooktop grate restores a stable cooking surface for one burner on compatible Frigidaire gas ranges. It provides a sturdy, heat-resistant support for pots and pans to help maintain safe, even cooking. What it does:

• Replaces a damaged, chipped, or deformed cooktop grate to restore proper pot and pan support
• Helps prevent cookware from wobbling or slipping on the burner
• Resists heat and direct flame exposure under normal cooking conditions
• Improves burner stability and consistent heat transfer to cookware

• Allow the range to cool completely and turn off the gas supply or disconnect power before installing
• Lift out the old grate and set the new grate into position, ensuring it sits level on the cooktop supports
• Handle carefully—grates can be heavy and have sharp edges; use gloves if needed
• If the grate does not seat properly, recheck alignment; do not force or pry into place

This cast cooktop grate supports cookware above gas burners, providing a stable cooking surface and directing heat where you need it. It replaces a worn, cracked, or misshapen grate to restore safe, even cooking performance. What it does:

• Supports pots and pans over a gas burner for stable cooking
• Helps direct flame and heat for consistent cooking results
• Replaces cracked, warped, or chipped grates that cause wobbling or uneven support
• Prevents cookware from making direct contact with burner heads

• Allow burners and grate to cool completely before handling.
• Lift old grate straight up; align new grate over burner and set into place—no tools typically required.
• Use caution: grates can be heavy and have sharp edges; wear gloves if needed.
• Do not modify the part; if fit or performance seems wrong, verify correct part number.

Replacement grommet that fits under a range grate foot to cushion and stabilize the grate, helping reduce noise and prevent scratching or shifting of the cooktop grate during use. What it does:

• Cushions and secures grate feet to stop rattling and unwanted movement.
• Helps protect the cooktop finish from scratching and wear where the grate contacts the surface.
• Can address noisy, loose, or rocking grates caused by worn or missing grommets.
• Restores proper grate alignment for safer, more stable cooking.

• Ensure the appliance is off and completely cool before starting any service.
• Lift the grate, remove the old grommet, and press the replacement onto the grate foot until fully seated.
• If multiple grommets show wear, replace matching feet for even support.

This cooktop grate kit replaces damaged or worn grates to restore stable, even support for pots and pans on a gas range. It helps maintain proper burner performance and keeps cookware level during cooking. What it does:

• Provides a sturdy surface for cookware so pots and pans sit flat and stable over burners
• Protects the cooktop surface from spills and direct flame contact
• Restores proper cookware alignment if existing grates are warped, chipped, or heavily worn
• Helps reduce wobble and improves cooking consistency when grates are compromised

• Turn burners off and allow the cooktop to cool completely before removing or installing grates
• Lift old grates straight up; install new grate pieces so they sit flush and stable over each burner
• No special tools typically required, but follow your range manual for any model-specific steps

This gas burner grate supports cookware on a gas cooktop, restoring stable, level support for safer, more consistent cooking. It replaces a cracked, warped or missing grate so pots and pans sit securely over the burner. What it does:

• Provides a stable surface for cookware so pans sit level over the flame.
• Helps maintain consistent heat contact for more even cooking.
• Replaces broken, chipped, warped or missing grates that cause wobbling or uneven heating.
• Designed to fit the designated cooktop burner location for correct alignment.

• Allow the cooktop to cool and turn all controls to OFF before replacing the grate.
• Remove the old grate and set the new grate into position—no tools are typically required.
• Inspect surrounding burner caps and ignitors; do not operate burners if any components are damaged.
• If you smell gas or suspect a leak, shut off the gas supply.

Color: Gray.

A replacement lower front vent grill that restores finished appearance and directs refrigerator airflow for proper cooling. Fits into the cabinet front to protect internal components while keeping the vent path clear. What it does

• Covers and protects the refrigerator's lower vent area and internal components from debris.
• Directs airflow from condenser/evaporator area to help maintain proper cooling performance.
• Replaces cracked, broken, or loose trim that causes rattling or poor fit.
• Improves the appliance's exterior appearance when the original grill is damaged or discolored.

• Disconnect power to the appliance before starting any work.
• Typically installs by aligning tabs/clips and snapping into place; some models may use a few screws.
• Handle plastic parts gently to avoid breaking mounting tabs; use hand tools as needed.