Grate, Grate Feet, Griddle

This cooktop grate assembly replaces a damaged or missing stove grate to restore a stable surface for pots and pans and ensure even cooking. Designed to sit over the burner area and support cookware during use. What it does:

• Supports cookware over the burner for safe, steady cooking
• Keeps pots and pans level to reduce tipping and spilling
• Restores proper clearance above burners for consistent flame pattern
• Replaces cracked, broken, warped, or missing grates that cause instability

• Allow the cooktop to be completely cool before replacing the grate
• Remove any old grate and set the new grate into position; ensure feet/locating tabs sit flush
• No special tools typically required; follow your appliance manual for model-specific guidance

The Burner Grate Kit is an OEM part for Whirlpool ranges. It is a set of burner grates that provide a stable and level surface for your cookware while distributing heat evenly for efficient cooking.

A bad burner grate kit can occur over time due to regular use and exposure to high heat. It may show signs of wear and tear, such as cracks, chips, or discoloration. Damaged or worn burner grates can affect the stability of your cookware and result in uneven heating. If you notice cracks, chips, or discoloration on your burner grates, it may be time to replace them.

Symptoms of worn or damaged burner grates include:

• Uneven heating or hot spots during cooking
• Difficulty in balancing or stabilizing cookware on the grates
• Unsightly stains or discoloration that cannot be removed

Restore your range by replacing this genuine OEM Burner Grate Kit. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Grate Kit is an OEM part for Whirlpool cooktops. It includes the grate component that sits directly above the cooking elements on an electric or gas cooktop. This grate allows for food and cookware to be placed directly over the heating surfaces while also protecting the cooking elements from accidents.

Causes of a bad grate kit can include wear and tear from repeated heating cycles, cracks or breaks from impacts with cookware, or corrosion issues from spills or cleaning products.

Symptoms of a bad grate include: 

• Gap openings that allow liquids or debris to come in contact with burners or heating elements  
• Wobbly or unstable installation providing uneven cooking surfaces
• Broken or missing grate components that compromise safety and usability

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Grate Kit is an OEM part for select Whirlpool range models. The kit includes grates that provide a stable and secure surface for your cookware on the stovetop. 

Grates can deteriorate over time due to constant exposure to high heat, aggressive cleaning agents, or heavy cookware. Common problems include warping, chipping, or enamel coating degradation, which can compromise the stability of your pots and pans while cooking.

Symptoms of worn-out grates include:

• The grates wobble or are unstable when cookware is placed on them.
• Noticeable chips, cracks, or rust on the grates.
• Difficulty in cleaning, with food residues sticking persistently.
• Discoloration or deterioration of the grate's surface.
• Uneven heating of cookware due to warped grates.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

The Burner Grate is an OEM replacement part for GE gas cooktops. It is a crucial component that sits on top of the cooktop surface, providing a stable and durable platform for placing cookware directly over the gas burners. The burner grate is typically made of cast iron or enameled steel, ensuring durability and resistance to high temperatures.

Symptoms of a bad Burner Grate include:

• Excessive wear or warping, causing instability or rocking of cookware
• Cracks, chips, or missing sections of the grate
• Discoloration or rust buildup due to prolonged exposure to heat and spills

Causes of a bad burner grate can include repeated exposure to high heat, accidental drops or impacts, improper cleaning methods, or general wear over time. Spills or food debris left on the grate can also contribute to accelerated deterioration.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas cooktop models.

This replacement center grate restores stable cookware support on a 36" gas cooktop, helping the cooktop look and perform like new. It fits into the middle burner area and provides a secure, level surface for pots and pans. What it does:

• Supports pots and pans over the center burners for safe, steady cooking
• Replaces cracked, broken, or warped grates that cause instability
• Prevents cookware from rocking or tipping on the cooktop
• Helps maintain proper spacing between cookware and burners for consistent use

• Turn off all burners and allow the cooktop to cool completely before handling
• Remove any surrounding grates and lift the center grate into place; no special tools usually required
• Inspect the grate seat area for damage or debris and clean before installation

The Grate-Kit is an OEM part for Whirlpool cooktops. It includes replacement grates for the oven and broiler that sit above the burner elements. These grates protect the heating elements and allow for food to be easily placed into and removed from the oven cavity. 

Causes of a bad grate kit can include wear and deterioration over time from repeated exposure to high heat, as well as accidents like impact damage or scratches from improper cleaning. 

Symptoms of a bad grate kit include:

• Visible wear and thinning of grates that expose heating elements
• Loose, wobbly, or damaged grates that could fall into the oven
• Discoloration or corrosion
• Difficulty removing or placing food on grates

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace worn or damaged surface grates with this grate kit to restore a sturdy, level cooking surface on your gas range or cooktop. It keeps pots and pans stable over the burners for safer, more consistent cooking.

• Supports cookware above the burners and provides a continuous cooking surface
• Helps keep pots and pans level to prevent rocking or tipping
• Replace if grates are cracked, warped, severely chipped, or missing feet/pads
• Can help address wobbly cookware, unstable placement, or uneven pan contact

• Turn all burners off and allow the cooktop to cool completely before handling grates
• Lift off old grates; clean the cooktop surface and burner caps while accessible
• Position the new grates in the proper locations; ensure all feet sit flat and any alignment features engage
• Test pan stability on each burner before cooking

The Burner Grate is an OEM part for Whirlpool gas ranges. This heavy-duty grate sits above the burners to safely distribute heat from the elements below.

Causes may be normal wear and tear from regular cooking use. Accidental damage from cookware is also possible over the years.

Symptoms of a faulty burner grate include:

• Warping or sagging over time affects pan placement and heat distribution
• Broken or missing wires that compromise safety
• Rough or sharp surfaces that could damage cookware
• Discoloration or buildup from prolonged heat exposure

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement griddle restores a flat cooking surface for even contact and easy cleanup on compatible ranges. It provides a sturdy, heat-resistant surface for pancakes, sandwiches, and other griddle-style cooking. What it does:

• Replaces a damaged, warped, or worn griddle surface to improve heat contact and cooking consistency
• Provides a smooth, flush cooking area for foods that need flat-surface cooking (pancakes, bacon, grilled sandwiches)
• Helps contain and direct grease toward the range's existing drip system
• Useful when the original griddle has cracks, heavy corrosion, or irreparable warping

• One replacement griddle plate

• Disconnect power to the appliance and allow all surfaces to cool completely before starting
• Follow the appliance manufacturer's service instructions; some models require removing burners or grates and securing the griddle with fasteners or alignment tabs
• Handle carefully to avoid sharp edges and to prevent damage to the griddle finish

Replacement burner grate that supports pots and pans on the cooktop, restoring a stable cooking surface and proper burner clearance. Ideal when the original grate is chipped, cracked, warped, or no longer seats cookware securely. What it does:

• Supports cookware directly over the burner so pots and pans sit level for more even heating and safer cooking.
• Replaces damaged or misshapen grates that cause wobbling, uneven cooking, or improper burner alignment.
• Elevates cookware to help maintain proper burner clearance and reduce direct contact with spills.
• Built to withstand high temperatures and everyday use for reliable performance.

• Allow cooktop to cool completely and turn off the gas supply before servicing.
• Most installations are a simple swap: lift out the old grate and set the replacement grate into position.
• Ensure the grate sits flat and is properly aligned over the burner cap before use.

This replacement griddle provides a flat cooking surface for stovetop and range use, restoring even contact for pancakes, bacon, and grilled sandwiches. Designed to match OEM fit and finish for direct replacement. What it does:

• Replaces a worn or damaged range griddle to restore a flat, stable cooking surface
• Enables even heating contact for griddled foods like pancakes and sandwiches
• Helps eliminate hotspots or warped cooking surface symptoms
• Returns proper alignment with the cooktop for safe, stable use

• One replacement griddle

• Remove power to the appliance and allow all surfaces to cool before handling
• Handle with care to avoid scratching the cooking surface; use proper lifting points
• Follow your model's service manual for removal and reinstallation steps
• If hardware or clips are missing from the appliance, obtain OEM fasteners separately

This accessory grille assembly replaces a damaged or missing front grille to restore the appliance's exterior appearance and proper airflow. It provides a direct-fit cosmetic and functional replacement designed to match factory mounting points. What it does:

• Covers and protects internal components behind the appliance opening while maintaining proper ventilation
• Restores finished appearance where grille is cracked, broken, or missing
• Helps prevent debris from entering the cabinet area behind the grille
• Fits into existing factory mounting points for a secure attachment

• Disconnect power to the appliance before beginning any repair.
• Remove surrounding trim or fasteners carefully to avoid cosmetic damage.
• Align grille with factory mounting tabs and secure with original screws or clips.
• Replace damaged or missing clips or screws with OEM-recommended fasteners.

The Grate Replacement Kit is an OEM part for GE ranges. This kit includes all necessary grates and supports to fully outfit the main oven cavity. Properly placed grates are important for optimal food placement and heat circulation during baking.

Symptoms of needing a new grate kit include:

• Warped or misshapen grates that no longer lay flat
• Broken welds or detached grate supports   
• Missing sections or grates that have completely broken apart

Causes involve the harsh temperatures and food cleanings taking their toll over years of use. Natural wear and cumulative stress weaken metal parts.

Color: Bisque

This authentic GE grate replacement kit restores like-new functionality. The heavy-duty grates and supports promote even baking and easy cleanup. Upgrading with this kit maintains your oven's quality cooking performance.