Hotpoint Parts

This dishwasher door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door action, prevents sudden slamming, and reduces stress on the hinges and link components.

• Provides the tension that counterbalances the door's weight during opening and closing
• Helps prevent the door from dropping quickly or feeling unusually heavy
• Supports smooth, even movement within the door hinge/counterbalance system
• Common signs of failure: door falls open, won't stay partially open, or binds/squeaks while moving

• Disconnect power and shut off water before servicing; wear gloves and eye protection
• Remove the toe-kick to access the spring and hinge area
• Support the door; carefully relieve spring tension and transfer the spring to the same anchor points as the original
• Test door balance and motion before reinstalling the toe panel

Color: Black

The Start Relay is an OEM part for GE refrigerators. It helps initiate the compressor by providing a temporary boost of power to start the cooling process.

Causes of a bad start relay can include electrical failures, overheating, or general wear and tear.  

Symptoms of a bad start relay include:

• The compressor failing to start
• The refrigerator not cooling properly
• Clicking noises coming from the compressor area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dryer thermostat senses exhaust air temperature and opens or closes the heater circuit to keep drying temperatures consistent. Replacing a failed thermostat can restore proper heat control and help prevent overheating that can trip safety devices.

• Regulates dryer heat by cycling power to the heater based on sensed temperature
• Helps protect the appliance by interrupting heat if temperatures rise beyond its calibration
• Common symptoms: no heat or intermittent heat, long dry times, dryer runs too hot, temperature swings
• Replace if it fails continuity checks or is out of spec per your model's service information

• Disconnect power; for gas models, also shut off gas supply
• Allow the dryer to cool before servicing
• Access the thermostat on the blower or heater duct (varies by model); transfer wires one at a time and mount the thermostat flush to the surface
• Clear lint and verify vent airflow before testing operation

The Shelf is an OEM part for GE refrigerators. It provides a stable and durable surface for storing food and other items within the refrigerator. The shelf is designed to fit seamlessly into the refrigerator's interior, maximizing space and organization. It measures approximately 25 inches wide by 14 inches deep.

Over time, the shelf can become damaged due to heavy loads, accidental impacts, or regular wear and tear. If you notice cracks, chips, or instability in the shelf, it is important to replace it to ensure safe and effective storage.

Symptoms of a bad shelf include:

• Cracks or visible damage
• Difficulty in keeping items stable
• Reduced storage capacity due to instability

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Bearing only, to get complete assembly order WE25M40

The Triple Water Valve is an OEM part for GE washing machines. This valve controls the flow of hot, cold, and warm water into the washing machine, ensuring the proper temperature and water level for each wash cycle. It is a critical component for the accurate filling and rinsing functions of the washer.

Replace the triple water valve if it becomes faulty due to mineral buildup, wear and tear, or electrical issues. 

Symptoms of a bad triple water valve include:

• The washer not filling with water
• Incorrect water temperatures during cycles
• Water leaking from the valve
• Slow or uneven water flow into the machine

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Defrost Timer is an OEM replacement part for GE refrigerators. It automatically initiates timed defrost cycles to prevent the buildup of frost or ice within the refrigerator compartment and freezer coils. Regular defrosting maintains optimal temperature regulation and airflow while minimizing mineral deposits long-term.  

Symptoms of a bad defrost timer include:

• Inability to initiate automatic defrost functions
• Accumulation of excessive frost or ice buildup risking freezer damage    
• Temperature control or airflow issues disrupting refrigeration  
• Potential dripping or leaks from defrost water overflow

Causes of failure involve worn-out internal contacts or degraded electronic components from extended exposure to refrigerated conditions. Mineral residue accumulating within the timer mechanism over many years also risks impeding electrical connections.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators. 

The Broil Element is an OEM part for GE ranges. This part provides the necessary heat for broiling, located at the top of the oven cavity and designed to deliver even and intense heat for broiling foods.

Causes of a bad broil element can include electrical issues such as short circuits, physical damage from impacts or heavy usage, or wear and tear over time.  

Symptoms of a bad broil element include:

• The broil element not heating up
• Uneven or insufficient broiling results
• Visible damage such as blisters or breaks in the element
• The oven not reaching the desired broiling temperature

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Solenoid is an OEM part for GE dishwashers. This component controls the draining function by opening and closing the drain valve, ensuring that water is properly expelled from the dishwasher at the appropriate times during the wash cycle.

Common causes of a bad drain solenoid include electrical malfunctions, buildup of debris or mineral deposits, and general wear over time. These issues can prevent the solenoid from operating correctly, leading to improper draining.

Symptoms of a bad drain solenoid include:

• Standing water at the bottom of the dishwasher after the cycle
• Unusual noises during the draining process
• Error codes related to draining
• Water leakage from the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Thermostat is an OEM part for GE dryers. As a critical component in regulating the dryer's temperature, this thermostat ensures that the machine operates within a safe and efficient heat range. It monitors and controls the heat level, preventing the dryer from overheating while maintaining optimal drying conditions.

The need to replace the thermostat can arise from a variety of issues, including electrical problems, wear and tear, or a malfunction due to overheating. A failing thermostat can significantly impact the dryer's performance and safety.

Symptoms of a faulty Thermostat include:

• The dryer not heating up properly or overheating.
• Clothes taking longer than usual to dry.
• The dryer shuts off prematurely or not starting.
• Inconsistent heating leads to unevenly dried clothes.
• Potential safety hazards if the dryer overheats.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

This defrost heater assembly melts frost from the evaporator during the automatic defrost cycle to keep airflow clear and temperatures stable. Replacing a failed heater helps restore consistent cooling and prevents ice buildup that blocks the freezer wall. What it does:

• Heats the evaporator coil to melt accumulated frost/ice during scheduled defrosts
• Keeps airflow paths clear to maintain proper temperatures
• Helps prevent excessive frost on the back panel or evaporator
• Common symptoms of a failed heater include heavy ice buildup, weak airflow, warmer fresh-food temps, and longer run times

• 1 defrost heater assembly

• Unplug the refrigerator before servicing; wear gloves—sheet metal edges can be sharp
• Access the heater behind the freezer's rear panel at the evaporator
• Note wire routing and connector orientation; secure the new element as originally mounted
• After installation, clear any remaining ice so airflow is restored before powering on

This surface burner spark electrode creates the electric arc that lights the gas at the burner. Replacing a worn electrode restores consistent, reliable ignition.

• Generates a high-voltage spark at the burner head to ignite gas
• Helps ensure quick, repeatable lighting when the knob is turned to Lite
• Common symptoms: burner won't light, intermittent or weak spark, delayed ignition, lights only with a match
• If other burners spark normally, the affected burner's electrode is a common culprit

• Disconnect power and shut off gas before servicing
• Handle the ceramic insulator carefully to avoid cracking
• Match the new electrode's tip position and gap to the original; transfer mounting hardware as needed
• Route the ignition wire away from heat/sharp edges, ensure a firm connection, then reassemble and test ignition

This thermostat is a temperature-sensitive safety switch that monitors oven heat and helps manage the door lock mechanism during high-temperature cycles. It helps prevent opening the door until the cavity cools to a safe level.

• Opens/closes at preset temperatures to control the lock circuit
• Helps keep the door locked during self-clean and unlocks as the oven cools
• Can help if the door won't unlock after self-clean, won't lock, or shows lock-related errors
• Also involved when the oven won't start a clean cycle due to temperature/lock interlock issues

• Disconnect power to the appliance before servicing
• Access is typically from the control/lock area; note wire positions before removal
• Handle wires and terminals carefully to avoid damage
• After installation, test door lock operation through a clean cycle initiation/cancel

Restore reliable heat on your coil-top range with this 8-inch surface coil element assembly. It replaces a burned-out or damaged large burner so pots and pans heat evenly and respond predictably.

• Provides the electric heating surface for the 8-inch burner position
• Common fix for a burner that won't heat or heats intermittently
• Replaces a coil that is broken, blistered, or visibly burned
• Resolve uneven heating or hot spots on the element

• Disconnect power and let the appliance cool completely before servicing.
• Access and procedure vary by model; your product documentation.
• Handle the element carefully; avoid bending the coil or terminals.
• Inspect the burner receptacle and wiring for heat damage; replace if worn or loose.