Husqvarna Parts

The bar adjuster pin is located on the chainsaw body and allows proper tensioning of the guide bar and chain. Replace it if the chain becomes loose frequently, the pin is stripped or damaged, or if you cannot properly adjust chain tension.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Front handlebar mounting screw for chainsaws. Secures the front handle to the chassis. Replace if stripped, missing, or damaged during maintenance.

This is a dust cover that fits over the chainsaw's internal components to protect them from sawdust and debris. It helps keep the engine and clutch area clean during operation, extending the life of moving parts. Replace this cover if it is cracked, broken, or missing, which can allow debris to clog or damage internal mechanisms.

Secures the guide bar to your chainsaw. Replace if stripped, corroded, or threads are damaged. Confirm fit with your model number before ordering.

This is a clip that is used as a fastener in several types of lawn and garden equipment. Unlike nuts and screws with threads, the clip has prongs that attach to the threads of screws and bolts to offer better stability. When the clip is tightened, it acts as a locking mechanism to keep other parts in place. This allows the use of a nut without utilizing a lock washer. These clips can become damaged, brittle, or even break and will need to be replaced. Take a screwdriver and pull up the pins on the clip, which will result in feeling less tension around the component. At this point, the clip can be removed and a new one can be placed in the same position. Press the clip onto the nut or screw and push the pins into place. The rest of the machine can be reassembled and used as normal.This clip is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. It is compatible with string trimmers, chainsaws, and edgers manufactured by Poulan, Poulan Pro, Craftsman, Husqvarna, and Weed Eater.

Replacement mounting screw for outdoor power equipment. Secures various components and reduces vibration. Order when screws are stripped, lost, or damaged.

This screw secures the cylinder head to the engine block in outdoor power equipment like mowers and trimmers. Located at the top of the engine, it maintains proper compression and seal between engine components. Replace if the screw is stripped, corroded, or if you notice loss of engine power, oil leaks around the cylinder head, or difficulty starting the engine.

Replacement mounting bolt for chainsaw assembly. Secures components during operation. Order a new bolt if yours is stripped, missing, or damaged.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

Bar adjusting screw for chainsaws. Threads into the housing to tension and position the guide bar. Replace if stripped, missing, or damaged threads.

This is a replacement screw for chainsaws. This screw attaches the cylinder shield to the main body of the chainsaw. Over time and with regular use, the screw can become loose or damaged. This causes the cylinder shield to become loose as well, which could lead to the entire chainsaw falling apart during use. A loose cylinder shield exposes the engine to the elements and can cause damage to the engine and the chainsaw's performance.Check the screw to see if it should be replaced by trying to move the cylinder shield. If it stays firm, then the screw is fine. If you feel any looseness or resistance, the screw will need to be replaced as soon as possible. Check the screws for wear and tear frequently.This is a genuine OEM part sourced from the manufacturer, and it is a size T-25 Torx screw. The screw can be installed with a screwdriver, and the installation process should not take too long. Remember to always be careful around a chainsaw's blade, even for this simple repair.

Control knob for leaf blowers. Mounts on the handle assembly to adjust settings. Replace if stripped threads, cracked plastic, or worn grip.

Fastening screw for chainsaws. Connects and holds together various chainsaw components. Replace if screw is stripped, missing, or damaged.

Secures the fuel tank to the body of your leaf blower or trimmer. Replace if screw is missing, stripped, or damaged to keep fuel tank properly mounted.