Husqvarna Parts

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

Bar adjusting screw for chainsaws. Threads into the housing to tension and position the guide bar. Replace if stripped, missing, or damaged threads.

This is a replacement screw for chainsaws. This screw attaches the cylinder shield to the main body of the chainsaw. Over time and with regular use, the screw can become loose or damaged. This causes the cylinder shield to become loose as well, which could lead to the entire chainsaw falling apart during use. A loose cylinder shield exposes the engine to the elements and can cause damage to the engine and the chainsaw's performance.Check the screw to see if it should be replaced by trying to move the cylinder shield. If it stays firm, then the screw is fine. If you feel any looseness or resistance, the screw will need to be replaced as soon as possible. Check the screws for wear and tear frequently.This is a genuine OEM part sourced from the manufacturer, and it is a size T-25 Torx screw. The screw can be installed with a screwdriver, and the installation process should not take too long. Remember to always be careful around a chainsaw's blade, even for this simple repair.

Control knob for leaf blowers. Mounts on the handle assembly to adjust settings. Replace if stripped threads, cracked plastic, or worn grip.

Fastening screw for chainsaws. Connects and holds together various chainsaw components. Replace if screw is stripped, missing, or damaged.

Secures the fuel tank to the body of your leaf blower or trimmer. Replace if screw is missing, stripped, or damaged to keep fuel tank properly mounted.

Replacement mounting screw for gas and grass line trimmers. Secures various components during operation. Replace if stripped, missing, or damaged.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

Replace your chainsaw crankshaft seal to prevent oil leaks and maintain engine compression. Essential for models 36 and 41. Verify fit with your model number.

This is a thin gasket that seals the connection between the carburetor and the engine intake on a chainsaw. It prevents air leaks that could cause the engine to run lean or erratically. Replace this gasket if the engine surges, stalls, or won't idle properly, especially after carburetor removal or servicing.

Seals the crankcase opening to prevent oil leaks around the crankshaft. Replace if you notice oil seepage or grinding noises. Confirm fit with model.

Shoulder screw for chainsaws. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

Isolator for gas chainsaws. Installs between engine and handle assembly to reduce vibration transfer. Replace if cracked, deteriorated, or missing.

Ignition module for gas leaf blowers and line trimmers. Mounts near the flywheel to generate spark. Replace if cracked, corroded, or failing to start.