Kenmore / Sears Light, Bulb, Lamp

The Dryer Light Bulb is essential for maintaining proper lighting inside your Samsung dryer. This genuine OEM part ensures reliable performance and perfect compatibility with a wide range of Samsung dryer models. With this high-quality incandescent lamp, you can easily monitor your laundry cycle, making it simpler to manage drying times and prevent over-drying. The Dryer Light Bulb is designed for durability, providing long-lasting illumination that helps you keep track of your clothes without any hassle. Installation is straightforward, allowing you to replace a burnt-out or dim bulb quickly and efficiently. By choosing this genuine OEM part, you ensure that your dryer operates at its best, maintaining optimal functionality and enhancing your overall laundry experience. Whether youGÇÖre a DIY enthusiast or simply looking to keep your appliance in top condition, the Dryer Light Bulb offers a reliable solution to keep your dryer well-lit and efficient.

This replacement cover restores a finished look and protects underlying components on your appliance. Replacing a cracked or missing cover helps keep out debris and moisture while maintaining proper function and appearance. What it does:

• Shields internal parts from dust, splashes, and accidental contact
• Helps maintain intended airflow/water routing depending on location
• Secures the opening or mechanism for a snug, rattle-free fit
• Typical symptoms: cracked, warped, loose, or missing cover; exposed components; new rattling or vibration noises

• Disconnect power; shut off water supply before servicing
• Note orientation and any clips/gaskets before removal; transfer reusable hardware
• Reinstall with original screws/clips; do not overtighten to avoid cracking
• Restore power and test; check for proper fit and any leaks or vibration

This is the light lens that covers and protects the appliance's light source. Replacing a cracked, yellowed, or missing lens restores clear, even illumination while shielding the bulb/LED from grease, moisture, and impact.

• Diffuses light for more even, glare-free illumination
• Protects the bulb or LED module from debris, grease, and moisture
• Replace if the lens is cracked, warped, melted, discolored, or missing
• Also replace if the lens no longer stays seated or falls out

• Disconnect power to the appliance before servicing and allow the area to cool
• Remove any retaining screws or release tabs to take off the old lens
• Seat the new lens fully; reuse existing fasteners if applicable
• Do not overtighten fasteners; handle carefully to avoid damage

This lens covers the interior lamp in the refrigerator compartment, diffusing light and protecting the bulb. Replacing a cracked or missing lens restores even illumination and keeps the bulb safely shielded from bumps and splashes. What it does:

• Diffuses the compartment light for clearer, more even illumination
• Shields the bulb from accidental contact, debris, and moisture
• Common fix for broken tabs, a yellowed/warped or cracked lens, or a missing cover
• Helps reduce glare from an exposed bulb and improves visibility inside

• 1 lens

• Disconnect power and let the bulb cool before starting
• Release the retaining tabs or remove screws; support the lens as you take it off
• Align and fully seat the new lens; ensure clips engage or screws are snug—do not overtighten

This light socket replaces a worn or heat-damaged lamp holder so your appliance light works reliably again. Its straight-connector design fits applications with in-line wiring, ensuring a secure electrical connection to the interior light bulb.

• Holds the light bulb and supplies power to it
• Restores interior illumination for better visibility
• Straight terminal orientation for housings requiring inline wiring clearance
• Typical signs of failure: light stays off with a good bulb, flickers, or shows heat damage at the socket

• Disconnect power at the breaker or unplug before servicing; allow the area to cool completely
• Remove any lens/cover; transfer wires one at a time to maintain correct connections
• Secure the socket with existing bracket/fasteners; do not overtighten
• Test light operation before reassembly and confirm the door switch activates the light

This lamp cover encloses and shields the light bulb while diffusing illumination inside the appliance. Replacing a cracked, discolored, or missing cover restores safe, even lighting and protects the bulb from accidental contact and debris.

• Covers and protects the light bulb; diffuses light for better visibility inside the compartment
• Helps prevent bulb damage from impact, moisture, and debris
• Common symptoms: cover is cracked, warped/melted, yellowed, loose, or missing; exposed bulb or harsh glare
• Sometimes called a light lens; may rattle or fall out when tabs or screws break

• Disconnect power to the appliance and allow the lamp area to cool completely
• Handle the lens carefully; align tabs/clips and seat fully before securing—do not overtighten
• Inspect and replace the bulb if damaged or heat-darkened

This light bulb restores dependable illumination in your ventilation appliance, improving visibility for cooking and cleaning. Replace a burned-out lamp to bring your range hood or fan back to normal lighting performance. What it does:

• Provides light for the cooktop or workspace under your hood/fan
• Replaces a failed, dim, or flickering bulb
• Helps maintain safe visibility during cooking and cleanup
• Direct replacement for the original lamp specified for the unit

• 1 light bulb

• Disconnect power at the breaker or unplug the unit before servicing
• Allow the existing bulb and lens/cover to cool completely
• Remove the lens/cover as directed in your model's instructions and install the new bulb without exceeding the wattage/voltage on the unit's rating label
• If your unit uses a halogen capsule, avoid touching the glass with bare hands; use gloves or a clean tissue

This LED light board powers the refrigerator's interior lighting, restoring bright, dependable illumination when the lights go dim, flicker, or stop working. It replaces the failed circuit board that drives the factory LED light module. What it does:

• Supplies regulated power to the refrigerator's interior LED light module
• Restores proper illumination in the fresh food and/or freezer sections (varies by model)
• Common symptoms: no interior light, dim light, flickering/strobing, or intermittent lighting
• Direct replacement for the original failed light control board

• 1 LED light board

• Disconnect appliance from power before servicing
• Handle the board by the edges and observe ESD precautions
• Note connector orientation; transfer lens/housing from the original assembly if required
• Ensure connectors are fully seated before restoring power

250V.

To order indicator lens use WP22001948.

Restore visibility inside your appliance. This lamp assembly replaces a damaged or failed interior light so you can clearly see contents when the door opens, helping maintain safe, reliable illumination in the cabinet/drum.

• Provides interior illumination when the door opens or when the control calls for light
• Houses the bulb and makes the electrical connection
• Common symptoms: no interior light, flickering/intermittent light, or heat-damaged/burned socket or housing

• Disconnect power before servicing to avoid electrical shock
• Access the lamp from the interior or service panel per model
• Install a bulb with the correct type and wattage specified for your model
• Test light operation before reassembling panels

This replacement microwave lamp restores the lighting you rely on to safely see food in the cavity or the cooktop below, depending on your model. Replace a burned-out bulb to bring back clear, convenient visibility while cooking.

• Provides illumination for the microwave interior or the cooktop beneath an over-the-range unit
• Common symptoms: light does not turn on with the door or during cooking
• Other signs of failure: dim, flickering, or visibly blackened bulb
• Restores visibility so you can monitor food and your workspace

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the area to cool; access location varies by model
• Handle capsule-style bulbs with gloves or a clean tissue; oils from skin can shorten bulb life
• Use only the lamp type and wattage specified for your model in the user manual or on the rating label

This light bulb replaces the original lamp in your appliance, restoring clear interior visibility during everyday use. Swap a burned-out bulb to easily see contents and status while loading, cooking, or checking progress.

• Provides illumination inside the appliance when the door opens or during operation, depending on model design
• Common symptoms include no light, dim or flickering light, or a visibly broken bulb
• Direct replacement for the factory lamp used in compatible models to maintain proper fit and brightness
• If a new bulb does not light, the light switch, socket, wiring, or control may also need service

• Disconnect power to the appliance before servicing
• Allow the area to cool before replacing the bulb
• Handle with clean gloves or a cloth; if your model uses a halogen-style lamp, avoid touching the glass
• Use only the bulb type and wattage specified in your product documentation

This lamp assembly restores the interior drum light in your washer, improving visibility when loading and unloading. Replace a failed or damaged light to clearly see items and check the tub at a glance.

• Illuminates the washer drum when the door/light function is active
• Replaces a burned-out, flickering, or physically damaged lamp assembly
• Connects to the existing wiring harness and mounts in the factory location
• Symptoms include: drum light not turning on, intermittent flicker, or a cracked lens/housing

• Unplug the appliance before servicing; turn off water supply if opening the cabinet
• Access varies by model; may require removing the top/front panel and door boot clamp
• Disconnect the wiring connector carefully, seat the new assembly fully, secure it, and verify light operation before reassembly

This lamp holder, also called a light socket, secures the bulb and provides the electrical connection so the appliance light works reliably. Replace a heat-damaged or loose socket to restore steady illumination.

• Holds the bulb in place and provides electrical contacts
• Helps fix a light that won't turn on, flickers, or works intermittently
• Addresses signs of heat damage, arcing, or a burnt/melted socket
• Ensures proper bulb seating for consistent lighting

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the area to cool and handle glass bulbs with care
• Transfer wires to the new holder one at a time to maintain correct connections
• Microwaves contain high-voltage components; avoid internal access unless properly trained

This replacement light bulb restores bright, dependable illumination inside your oven so you can monitor cooking without opening the door. Swap it in when the oven light is out, very dim, or flickers during use. What it does:

• Illuminates the oven cavity in a range or wall oven
• Lets you check food without opening the door and losing heat
• Common fix for no light, dim light, or intermittent flickering
• Replaces a burned-out/broken bulb as the first step in troubleshooting

• One light bulb

• Disconnect power at the breaker or unplug the appliance; allow the oven to cool completely.
• Remove the light cover/lens per your model; handle glass components carefully.
• Install the new bulb securely; avoid touching the glass with bare hands—use a clean cloth or gloves.
• Reinstall the cover, restore power, and test the oven light.