Kenmore / Sears Touch Pad

This control panel overlay restores the labeled clock/timer area and button markings on your oven or range so the display and controls are easy to read and use. It replaces a cracked, faded or worn clock overlay for a cleaner finish. What it does:

• Replaces the worn or damaged clock/timer graphic area on the control panel
• Restores button labels and display visibility for accurate clock and timer operation
• Improves appliance appearance by covering scratches, discoloration, or peeling
• Helps prevent dirt and moisture from contacting the printed control area

• Designed to fit the original location; inspect mating surface and alignment before final placement
• Remove power to the appliance before starting any work to avoid electrical shock
• May require removal of the control panel or trim pieces; keep screws and fasteners organized
• If adhesive is used, ensure the surface is clean and dry for proper adhesion

This bisque clock overlay restores the finished look of the range control panel and provides a clean face for the clock and control indicators. It replaces a cracked, faded, or missing overlay to improve appearance and readability. What it does:

• Covers and protects the clock/display area on the control panel
• Restores printed markings and a uniform finish for easier time reading
• Helps prevent dirt and debris from collecting on the clock face
• Useful when the existing overlay is cracked, discolored, or peeling

• One bisque clock overlay

• Disconnect power to the appliance before beginning any work
• Removal may require accessing or removing the control panel; follow model-specific service instructions
• Handle carefully to avoid scratching or bending the overlay during installation
• Use only manufacturer-recommended fasteners or adhesive as applicable for your model

This replacement overlay is the decorative and functional cover for the appliance control panel, restoring button labels and the finished appearance so controls are readable and protected from spills. What it does:

• Replaces worn or faded control-panel graphics so button labels and icons are visible
• Protects the underlying membrane switches and electronics from spills and surface wear
• Helps restore a clean, factory appearance to the console
• Resolves issues where worn legends cause confusion about button function

• One control-panel overlay as shown

• Designed to fit over the console; remove power before beginning work
• Handle carefully to avoid bending or creasing the overlay during installation
• Use common hand tools; follow OEM disassembly order to access the console
• If adhesive is present, clean the surface of old residue before applying the new overlay

This dispenser facade replaces the outer trim pieces around your refrigerator's ice and water dispenser, restoring appearance and proper fit for smooth operation and sealing. It's a direct-fit cosmetic and protective assembly. What it does:

• Covers and protects the dispenser opening and controls from damage and debris
• Provides a finished look and helps direct water/ice into the cup
• Restores proper alignment when cracked, warped, or broken facade causes interference
• Helps prevent drafts and minor water splash at the dispenser area

• Disconnect power and shut off water to the appliance before servicing
• Many installations require removing the dispenser bezel and releasing snap-clips or screws; save hardware for reinstallation
• Handle plastic trim carefully to avoid scratches; use a soft pad when setting parts down

This control panel overlay replaces a worn or damaged console decal to restore button labels and the front appearance of the appliance. It lays over the control area to keep the underlying panel readable and protected. What it does:

• Replaces faded, scratched, or peeled control graphics so settings and icons are visible
• Protects the underlying control panel from wear, spills, and minor abrasions
• Restores a clean, factory look to the console for improved user interaction
• Helps resolve issues where worn markings cause confusion when selecting functions

• Disconnect power to the appliance before starting any work
• Remove the original overlay carefully to avoid damaging the underlying control surface
• Use appropriate adhesive or mounting method if required; follow OEM service instructions

This control panel overlay is the thin decorative and functional face that covers the appliance control area, restoring legible button labels and a clean finished look. It helps refresh worn or damaged controls without replacing the whole module. What it does:

• Replaces faded, scratched, or peeled control graphics so buttons and markings are readable again
• Protects the underlying control assembly from spills and light wear
• Restores the original appearance of the control area for improved usability
• Useful when labels are worn or the panel surface is cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Typically aligns over the existing control surface and adheres or secures with the original fasteners — follow OEM instructions
• Handle carefully to avoid creasing; ensure surfaces are clean and dry before installing

This control console is the outer housing that holds and protects the appliance's control buttons and display, restoring a clean, functional front surface and securing the control components. What it does:

• Covers and supports the control board, buttons and display for normal operation
• Restores a finished appearance when the original console is cracked, broken or cosmetically damaged
• Helps keep moisture, dust and debris away from controls to reduce malfunctions
• Provides the mounting surface for knobs, switches and electronic controls

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle carefully to avoid scratching the finish and protect any attached wiring or trim
• Typical install requires removing the top or front trim and transferring controls or hardware as needed
• Keep all screws and clips; use the same hardware or OEM replacements for secure fit

Color: White

This 10-button switch assembly replaces the worn or unresponsive front control buttons on compatible Frigidaire appliance control panels, restoring reliable push-button input and normal user control of cycle and function selections. What it does:

• Replaces cracked, stuck, or non-responsive push buttons on the appliance control console
• Restores tactile button feedback and reliable electronic input to the control board
• Helps regain access to oven/range or console functions that won't register when buttons fail
• Fits into the front user interface assembly to provide a like-for-like button layout

• Always disconnect power to the appliance before beginning repair to avoid shock or damage
• Installation typically requires removing the control panel or console; handle the assembly and ribbon connector with care
• Inspect connectors and mating surfaces for damage or debris before installation

This electronic control board replaces the refrigerator's main control module to restore reliable control of temperature, defrost, and compressor cycles. It fixes intermittent or non-responsive controls for better cooling performance and consistent operation. What it does:

• Receives user inputs and manages compressor, fans, and defrost timing to maintain set temperatures
• Controls display and status indicators so settings and alarms register correctly
• Stops erratic cycling and resolves symptoms like no cooling, unresponsive buttons, or blinking lights
• Helps correct error codes caused by failed or intermittent control signals

• One electronic control board (main control)

• Disconnect power to the appliance before starting work to avoid electrical shock
• Handle the board carefully; avoid touching contacts and use proper ESD precautions when possible
• Compare part number on the old board to ensure correct replacement before installing

This control panel overlay is the printed decal that covers the appliance console, restoring button labels and the finish around the controls for a clean, readable interface. It helps make controls easy to read and gives the console a refreshed appearance. What it does:

• Replaces worn, faded, or damaged button labels and graphics on the console
• Restores a clear, legible control surface so settings and symbols are visible
• Protects the underlying control board area from light wear and cosmetic damage
• Commonly used when characters or icons have rubbed off or the panel looks worn

• One control panel overlay decal

• Intended for cosmetic replacement; remove power or unplug appliance before starting
• Peel-and-stick or install using factory mounting points—align carefully to avoid wrinkles
• Clean and dry the console surface before applying for best adhesion

This backguard kit replaces the upper rear panel and trim on compatible ranges to restore a clean appearance and protect wall and controls from spills and heat. It's a direct-fit exterior repair for damaged, bent, or corroded backguards. What it does:

• Replaces the upper rear backguard panel and trim to restore the range's finished rear appearance
• Protects the control area and wall from splashes, grease, and heat exposure
• Helps stop drafts and gaps behind the range that can collect debris
• Addresses visible damage like dents, rust, or cracked trim

• Disconnect power to the range (unplug or switch off breaker) before starting work.
• Installation may require lifting and aligning the panel; use a second person for safety on larger ranges.
• Use common hand tools; keep fasteners and mounting brackets from the old assembly if reusable.
• Follow the appliance manufacturer's service instructions for model-specific steps and torque values.

This backguard kit replaces the rear trim panel on compatible electric and gas ranges to restore appearance and protect the wall and control area from spills and splatters. Ideal for worn, bent, or damaged rear trim. What it does

• Covers the area behind the cooktop to block grease, steam and food splatter.
• Restores a finished appearance to the back of the range after damage or removal.
• Helps protect controls and wiring routed near the rear from direct splatter.
• Designed to attach to the rear of the range using existing mounting points.

• One backguard kit.

• Installation generally requires lifting or pulling the range forward; use a second person to avoid injury.
• Disconnect power before beginning work.
• Use caution around sharp sheet-metal edges and wear gloves.
• Follow the OEM parts diagram and hardware locations; replace any damaged mounting hardware.

The Microwave Control Panel is an essential component for restoring the functionality of your Samsung microwave. This genuine OEM part ensures precise operation and seamless integration with your appliance, maintaining the high standards you expect from Samsung. Designed for easy installation, the control panel allows you to regain full control over your microwaveGÇÖs settings and features, enhancing your cooking experience. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and saving you time and money. Compatible with a wide range of Samsung microwave models, this control panel is a perfect fit for those looking to repair or upgrade their existing unit. By choosing the Microwave Control Panel , you ensure reliable performance and maintain the efficiency of your microwave, providing you with peace of mind and convenience in your kitchen. Whether youGÇÖre replacing a damaged panel or upgrading your appliance, this genuine OEM part delivers the quality and dependability you need for optimal microwave operation.

This console assembly replaces the dryer control panel and restores user controls and display functions so you can select cycles and monitor status. It's a direct-fit service assembly for affected Whirlpool-brand dryers. What it does

• Houses the control board, user buttons, and display used to select cycles and options
• Restores unresponsive or damaged buttons, cracked panels, or missing display components
• Re-establishes a secure mounting surface for the appliance controls and user interface
• Helps resolve symptoms like non-working buttons, blank or damaged console, or loose control hardware

• One complete console assembly (control panel) as shown

• Disconnect power (unplug or switch off breaker) before starting any repair
• Some wiring harnesses and fasteners may need careful removal; label connectors as needed
• Handle the assembly gently to avoid cracking plastic or damaging the display and connectors