Kenmore / Sears Touch Pad

This electronic control board is the freezer's central control module. It processes sensor inputs and user settings to run the cooling system and alerts. Replacing a failed board helps restore reliable operation and accurate temperature management. What it does:

• Controls compressor and evaporator fan operation to maintain the set temperature
• Interprets thermistor input and applies control logic to regulate cooling
• Coordinates features such as alarms and, on electronic models, defrost cycles
• Common symptoms include the unit not running or powering up, warming or unstable temperatures, unresponsive or erratic controls/display, or excessive frost buildup

• Disconnect power before servicing; handle the board with ESD precautions
• Access the control housing, note wire locations, and transfer connectors one at a time
• Secure the replacement board and reuse original mounting hardware and any reusable trim/overlay as applicable
• Restore power, set temperatures, and allow up to 24 hours for stabilization

This control panel overlay replaces a worn or damaged console decal to restore button labels and the front appearance of the appliance. It lays over the control area to keep the underlying panel readable and protected. What it does:

• Replaces faded, scratched, or peeled control graphics so settings and icons are visible
• Protects the underlying control panel from wear, spills, and minor abrasions
• Restores a clean, factory look to the console for improved user interaction
• Helps resolve issues where worn markings cause confusion when selecting functions

• Disconnect power to the appliance before starting any work
• Remove the original overlay carefully to avoid damaging the underlying control surface
• Use appropriate adhesive or mounting method if required; follow OEM service instructions

This control panel overlay replaces a worn or damaged console face to restore button labeling and the appliance's appearance. It provides the front graphics and surface where buttons are read and pressed. What it does

• Restores legible button labels and on-panel graphics for the control console
• Replaces scratched, faded, or peeled overlay surfaces that affect appearance
• Helps prevent dirt and moisture from contacting the underlying electronics
• Useful when buttons or icons are worn, making controls hard to read

• Disconnect power to the appliance before beginning any work
• Remove any retaining screws or clips holding the old overlay; save and reuse hardware only if undamaged
• Align the overlay carefully with mounting tabs and connectors; avoid bending or creasing the part
• If the overlay attaches to a keypad or electronic assembly, handle the electronics gently and avoid touching circuit contacts

This is a replacement control panel assembly that houses the dryer's user interface and controls, restoring responsive button input and readable display for normal operation. It's the main interface used to select cycles and start the appliance. What it does:

• Replaces worn or damaged front control board and button surface so commands register correctly
• Restores display visibility and indicator lights for cycle status
• Addresses symptoms like unresponsive buttons, blank or flickering display, or intermittent control behavior
• Interfaces with the dryer's electronics to send cycle and timing commands to the machine

• Disconnect power (unplug or flip breaker) before beginning any work to avoid shock
• Handle the assembly carefully to avoid damaging the display, ribbon cables, or connectors
• Keep screws and trim organized; some panels require removing a trim bezel to install
• Test functions after reconnecting power before fully reassembling the console

This 10-button switch assembly replaces the worn or unresponsive front control buttons on compatible Frigidaire appliance control panels, restoring reliable push-button input and normal user control of cycle and function selections. What it does:

• Replaces cracked, stuck, or non-responsive push buttons on the appliance control console
• Restores tactile button feedback and reliable electronic input to the control board
• Helps regain access to oven/range or console functions that won't register when buttons fail
• Fits into the front user interface assembly to provide a like-for-like button layout

• Always disconnect power to the appliance before beginning repair to avoid shock or damage
• Installation typically requires removing the control panel or console; handle the assembly and ribbon connector with care
• Inspect connectors and mating surfaces for damage or debris before installation

This touchpad and control panel assembly replaces the user interface that lets you set oven functions, temperature and timers. Restores button responsiveness and the visible control surface so the range responds correctly to inputs. What it does:

• Provides the front user controls and membrane touchpad for selecting bake, broil, timers and other functions
• Sends user commands to the range's control board so cycles start and settings change
• Commonly replaces panels with unresponsive or stuck buttons, missing legends, or intermittent input
• Resolves control-related problems when the display or buttons do not register presses

• Disconnect power to the appliance before servicing to avoid shock or damage
• Typical installation requires removing the oven door or control housing; handle the glass and trim gently
• Avoid touching circuit traces and connector pins; ensure connectors are fully seated
• After installation, reconnect power and test all functions before reassembling trim panels

This white module cover label replaces a worn, faded, or missing label that fits over the appliance control module, restoring a clean finished look and ensuring the control area is clearly marked. What it does:

• Covers and protects the control module face from cosmetic damage and light surface dirt.
• Restores the printed/visible label area when original decal is cracked, peeled, or illegible.
• Helps maintain a finished appearance around the control assembly.
• Used when adhesive backing has failed or the original cover is missing.

• Disconnect power to the appliance before beginning any work.
• Remove the control console or housing per the appliance service instructions to access the module cover.
• Peel away old label and adhesive residue; align the replacement carefully before pressing into place.
• If fasteners are present, hand-tighten only and avoid forcing parts; follow OEM service guidance for reassembly.

This control panel overlay is the printed decal that covers the appliance console, restoring button labels and the finish around the controls for a clean, readable interface. It helps make controls easy to read and gives the console a refreshed appearance. What it does:

• Replaces worn, faded, or damaged button labels and graphics on the console
• Restores a clear, legible control surface so settings and symbols are visible
• Protects the underlying control board area from light wear and cosmetic damage
• Commonly used when characters or icons have rubbed off or the panel looks worn

• One control panel overlay decal

• Intended for cosmetic replacement; remove power or unplug appliance before starting
• Peel-and-stick or install using factory mounting points—align carefully to avoid wrinkles
• Clean and dry the console surface before applying for best adhesion