Maytag Gasket & Seal

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket provides a seal between the freezer door and the main cabinet, ensuring a tight closure and preventing cold air from escaping. It is made of high-quality materials that provide a reliable barrier against temperature fluctuations and help maintain cooling efficiency.

A bad freezer door gasket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as frost buildup inside the freezer, decreased cooling performance, or a loose-fitting freezer door, it may be time to replace the  the worn-out or damaged freezer door gasket with this genuine OEM part.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• Decreased cooling performance
• A loose-fitting freezer door

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Rubber door gasket seals refrigerator door perimeter to maintain interior temperature and humidity. Replace if door won't seal, condensation forms, or higher energy bills occur. Verify fit with your model number.

This door seal replaces a worn or damaged gasket around the oven door, creating a tight barrier between the door and the front frame. A fresh seal helps the appliance heat efficiently and maintain steady cooking temperatures. What it does:

• Seals the gap between the door and oven frame to minimize heat loss
• Helps the oven preheat faster and hold set temperatures more consistently
• Replace if the gasket is torn, brittle, flattened, or frayed
• Common signs include heat escaping around the door edge and longer cook times

• 1 door seal

• Disconnect power and allow the oven to cool completely before beginning
• Open the door and carefully remove the old seal, noting its routing and attachment points
• Clean the mating surface to remove debris for a proper seal
• Install the new seal evenly without stretching; ensure all ends and anchors are fully seated

This rubber seal creates a tight barrier between mating components to keep water contained and stop drips. Replacing a flattened or cracked seal helps prevent leaks and protects nearby parts from moisture-related damage. What it does:

• Forms a watertight gasket between two parts in the assembly
• Helps prevent drips or seepage at the connection point
• Restores proper compression when the original seal hardens or deforms
• Common signs of failure: leaks, dampness, or visible cracking/flattening of the old seal

• 1 rubber seal

• Disconnect power; for water-bearing assemblies, shut off the water supply
• Access the seal location per your service information and note orientation/depth before removal
• Clean mating surfaces; lightly moisten the new seal with water or mild soap to ease installation
• Ensure the seal is fully seated, reassemble, and test for leaks

This injector seal fits the refrigerator's water injector. It restores a tight, watertight/airtight connection where the injector passes through the liner or mates to the fill tube, helping prevent leaks and frost around the opening.

• Seals the injector-to-liner/fill-tube connection to stop water seepage and air leaks
• Helps prevent frost/ice buildup near the injector area and fill tube freeze-ups
• Addresses issues from a cracked, shrunken, or missing seal
• Common symptoms: water drips at the back/freezer wall and frost near the fill opening

• Disconnect power and shut off the water supply before servicing
• Access the injector area (rear of freezer or cabinet, depending on model)
• Remove the old seal; press the new seal fully and evenly into place
• Reassemble, restore water/power, and check for leaks and proper fill

Replace your dishwasher pump gasket to stop leaks at the pump area and prevent water pooling underneath. Restores watertight seal. Check fit by model.

Seals dishwasher door to prevent leaks. Replace if cracked, moldy, or causing water leakage. Check your model number for exact fit compatibility.

Replacement seal for garbage disposal stopper that prevents sink leaks. Install when seal is cracked, worn, or no longer holds water. Confirm fit by model.

Seals range door around glass window to maintain temperature and contain heat. Replace if door leaks heat or steam. Confirm fit with your model number.

Seals refrigerator or freezer door to maintain proper temperature and reduce energy loss. Replace if worn, cracked, or loose. Verify fit with model.

Seals refrigerator door to maintain temperature and prevent air leaks. Replace if torn, cracked, or door doesn't seal properly. Verify fit with model number.

Rear crisper seal restores airtight seal along back edge of drawer. Replace if worn, torn, or loose to improve humidity control and freshness. Verify fit.

Dryer door seal creates an airtight barrier to retain heat and improve efficiency. Replace if torn, cracked, or causing heat loss. Verify fit with your model number before ordering.

Isolator gasket that cushions and seals the washer tub. Replace if experiencing excessive vibration, noise, or leaks. Verify fit with your model.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.