Range / Cooktop / Oven Burner & Related Parts

I ordered the burner cap set. Read more

What you will need: * replacement parts * small and regular Phillips screwdrivers * small wrench * soapy water in a spray bottle or leak detection spray Take apart the top of the stove control unit 1) turn off the gas to the stove, in my case I cannot get to the shutoff valve easily so I ended up turning off the electricity to the stove at the fuse box as that forces an emergency shutdown of the gas supply internally of the stove. 2) remove all 5 knobs, the grates at the top and open the oven... Read more

Ordered new/replacements, excellent chat on line, Quick turn around delivery. Thank you Will recommend to friends. Read more

I examined the inner burner heads and determined that two of the most frequently used burners were warped and were not making good contact with the burner base. It's a GE Profile series stove about 10 -12 years old. I checked the GE Parts website, and they wanted almost $100 for the large burner head but didn't even have the small one at all, saying it was no longer available. By Googling the parts numbers, I found Appliance Part Pros, and they had both burner heads available. They were still a... Read more

We took the old ones off and put the new ones on..it was easy to do ..I want to say that the girl (I think her name was Heidi) she was a big help ,she made sure that I had the right parts,I ask her to show me the picture to make sure that they look like the part ..She was a really big help. I did a survey when I ordered the parts to..Thank you for your help and the parts Anna P Read more

I ordered your collection of burner caps, which the store I bought the stove from could not locate, and it fit perfectly. Read more

In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more

Conversion kit said put propane orifice .109 in to correct the problem but I had to use the .102 orifice. Read more

I bought new parts, but in black, so that any future staining over time would not be as noticeable. I was able to find everything I needed through AppliancePartsPros.com, and even though I only paid for economy delivery (3-6 working days), I was amazed that they turned up within 24 hours of my order being submitted! Replacing the parts was a 3 minute job, & my 14 year-old Kenmore cooker looks brand new. Read more

• Gas igniter glows, but will not light

Received all parts as ordered and it took about a half hour to change out all parts. Read more

After turning off the gas and unplugging the electricity, I removed all the burners from the stove top using a 3/16" hex socket. Then used a 1/4" socket to removed two or three screws under each burner which hold the burner base to the bottom of the top panel. Then pulled all the knobs and removed the front panel which was held in by two Phillips screws accessible from underneath the panel. It helps to open the oven door to get at these screws. With the knob panel gone, I removed two screws... Read more

I bought a new orifice and installed it. Read more

Ordered replacements Read more