Range / Cooktop / Oven Parts

It was a Friday afternoon, of course, I went to my local supply house for the part. I did look it up on your site first to see what I needed and how much I was looking to pay. I got there and "They don't stock those!" I said thank you and went to do more hunting. I ended up at what I found to be the only other parts place in town, and they could've ordered it, for much more than you, I don't mind paying more to get it now but am not going to wait a week to pay more. I said no and came home,... Read more

• Element will not heat

We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original.... Read more

• Won't start
• Element will not heat

Based on internet search and data found on APPLIANCE PARTS PRO, I deduced that the "infinite control " module was most likely bad. Replaced it and all is good. Toughest part was remembering how to disengage cooktop from down draft blower and then pulling the cook top up in within it's opening. Once pulled up, I put short 2x4's across the opening corners to support the cooktop safely while I worked on it. Next issue was figuring out exactly which screws held the glass top in place. As... Read more

Ordered new parts and replaced all. Had to slightly modify the wire terminals all four surface elements so that they would fit the ceramic insulators that were shipped with each one. Read more

• Little to no heat when broiling
• Element will not heat

I ordered the replacement part; after it arrived, I turned off the power to the oven - watched the video on how to replace the part, which was fantastic as it told me to make sure when I disconnect the old element not to let the wires fall behind the oven (that would have been a big problem b/c it's a wall oven) - However, one wire still slipped back a little - so I used needle nose pliers to retrieve it. Was able to plug the new one in - screw it into place with the original screws. I made... Read more

New knobs Read more

• Touchpad does not respond

Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more

Ordered new knobs, wasn't sure of the serial number of my stove because in was in the home when we purchased it, but the return policy was great. I order 4 knobs for my gas top stove and they were perfect and came within 3 business days. I love the customer service. Thank you Read more

Looked up the part number at Appliance Part Pros, ordered the window pack (received it the next day), and replaced the glass assembly. Was generally able to follow illustrated parts breakdown as a guide. Read more

Fridge keept building up ice in defrost drain drain in freezer. Once the drain pan filled with ice it drips into fridge compartment. After taking things apart three times to thaw it out, decided to replace defrost components - heater and temperature switch. In addition to new parts, also added a 12 gauge copper wire hook that hangs from defrost heater into the defrost drain. After this, the defrost cycle is running as expected, but will not know if the issue is corrected until a year or so... Read more

Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more

Replaced the large burner control switches for the ones giving trouble. Since the other two switches had seen as much use as the faulty ones, replaced them too. After putting in new switches, found that one large burner had burned out so replaced it also. Range now cooks as good as new Read more

• Won't start
• Element will not heat

First, I just unscrewed all nuts that are holding the frame and all surface elements. Once all parts, surface elements, control switches, are loose from the original glass, I just moved all parts to the new glass. Due to the weight of the glass, all actions have to be done carefully as I broken one corner of the glass couple of years ago when I replaced one of the control switch. Read more

Ordered a Pcb board and membrane switch it fixed the problem Read more

Replaced the knob. Read more

Replaced the part. Read more