Range / Cooktop / Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3150371
Replacement control knob for range top burners. Installs on the control panel to adjust burner flame levels. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Broken knobs Ronald H. • Houston , TX • November 24, 2014
New knobs
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509231
Fix F11 or F13 error codes, blank display, or total control panel failure. This gas range circuit board restores oven timers and functions. DIY-friendly.
Do-It-Yourself Stories from Customers like You
E12 control board problems oven did not function Joel C. • Brooklyn , NY • July 17, 2014
Replace control board.
Read more
More
$137.51
- Compare At:
-
$163.64
- You Save:
-
$26.13
Genuine Ge part
By: Ge
Part Number: WB03X29300
The Range Surface Burner Knob is an OEM part for GE ranges. This knob is designed to control the heat level of the surface burners on the range, allowing adjustments for various cooking needs. It fits onto the burner valve stem and provides a user-friendly interface for operating the burners.
You should replace the surface burner knob if it becomes damaged or worn out. Causes of a bad burner knob can include regular wear and tear from frequent use, accidental impact that causes cracks or breaks, or exposure to high heat that warps or deforms the knob.
Symptoms of a bad surface burner knob include:
- Difficulty in turning the burner on or off
- Knob slipping or not fitting securely onto the valve stem
- Visible cracks, breaks, or warping
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The knobs were missing Brendan O. • Charlotte , NC • March 25, 2022
I found the model and serial #'s. Looked them up on your website. You provided a diagram with part numbers. I ordered the parts. Your website made it extremely easy. Thank you.
Read more
More
$21.62
- Compare At:
-
$25.51
- You Save:
-
$3.89
Genuine Ge part
By: Ge
Part Number: WB28K10025
Replaces cracked, bent, or broken left front burner tube on gas ranges. Delivers gas from valve to burner head. Common wear part needing replacement.
Do-It-Yourself Stories from Customers like You
The burner tubes had been bent one too many times and finally cracked Gregory S. • Gainesville , FL • March 14, 2015
It was a Friday afternoon, of course, I went to my local supply house for the part. I did look it up on your site first to see what I needed and how much I was looking to pay. I got there and "They don't stock those!" I said thank you and went to do more hunting. I ended up at what I found to be the only other parts place in town, and they could've ordered it, for much more than you, I don't mind paying more to get it now but am not going to wait a week to pay more. I said no and came home,...
Read more
More
$33.61
- Compare At:
-
$40.33
- You Save:
-
$6.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P238-60
Burner won't turn off or only heats on high? This infinite switch controls heat settings for your electric range's surface element. DIY repair.
Do-It-Yourself Stories from Customers like You
One of the burners had stopped heating up Elaine H. • Missoula , MT • February 01, 2015
I used your chat and found out the year my stove was made. He also told me what part to order as one of the burners had stopped heating up. We watched the video on how to install it. My friend installed it and my stove burner now works.
Read more
More
$46.35
- Compare At:
-
$57.96
- You Save:
-
$11.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7737P245-60
Control knob for cooktop burner adjustment. Mounts on the control panel shaft. Replace if cracked, broken, worn smooth, or missing. Black plastic knob.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
One surface element and part of the top glass are broken Jason S. • Cupertino , CA • November 18, 2014
First, I just unscrewed all nuts that are holding the frame and all surface elements. Once all parts, surface elements, control switches, are loose from the original glass, I just moved all parts to the new glass. Due to the weight of the glass, all actions have to be done carefully as I broken one corner of the glass couple of years ago when I replaced one of the control switch.
Read more
More
$21.46
- Compare At:
-
$25.75
- You Save:
-
$4.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9010
Burner won't turn off or heat properly? This range burner switch controls power flow to surface elements. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Burner switch was not turning the burner off Mary K. • Dublin , GA • July 13, 2014
We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original....
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Ge part
By: Ge
Part Number: WB02X33180
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer.
Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress.
Symptoms of a bad support include:
- Loose or sagging lower oven drawer
- Grinding or binding noises when operating the drawer
- Difficulty fully extending or retracting the drawer
- The drawer not sitting securely in a closed position
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
Do-It-Yourself Stories from Customers like You
Rear supports missing from bottom stove storage drawer Tim H. • West Boylston , MA • September 18, 2015
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!!
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WB24X41827
Burner won't heat or stuck on high? This infinite switch and seal kit restores heat control and protects against spill damage. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Switch burnt due to water boiling over James R. • Macon , GA • October 27, 2020
I took it apart to troubleshoot. I was pretty sure it was the switch but wanted to make sure it wasn't the element as well. Sure enough the switch was burnt at a little piece of copper protruding out the side. The plastic was blackened too which was a telling sign. The element was fine. I replaced the switch, turned on the cooktop and it worked again. Apparently, these switches are wired in series because when this one went out the rest of them wouldn't turn on either.
Read more
More
$22.30
- Compare At:
-
$26.31
- You Save:
-
$4.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 316022500
Signals when your range burners or oven are active. Replace when light fails to illuminate or stays on constantly. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
A burner switch went bad in our electric stove and an indicator light burnt out Steve G. • Hanover , PA • January 05, 2015
The repair was a success. The switch and came looked different from the original. I called Appliance Parts Pro, they lady on the phone said that Frigidaire changed the switch and how to wire it up correctly. Problem solved. It all works as it should.
Read more
More
$59.36
- Compare At:
-
$70.04
- You Save:
-
$10.68
Genuine Samsung part
By: Samsung
Part Number: DG64-00472A
Replacement control knob for range burners. Installs on the front control panel. Needed when original knob is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Some of the stove top knobs were breaking down Paul B. • Algonquin , IL • February 10, 2016
Purchased 4 new knobs to replace the broken two and have two in reserve for down the road. Unfortunately the manufacturer's design won't stop the problem but at lease ApplianceParts Pro can replace them quickly. I ordered them the same day a repairman came out to fix the oven. I received the parts in 3 business days and the part ordered by the repairman is still not here. You were fast and reliable.
Read more
More
$33.78
- Compare At:
-
$62.94
- You Save:
-
$29.16
Genuine Lg part
By: Lg
Part Number: EAU62343001
Fix uneven cooking or baking in your range. This convection fan motor circulates hot air for consistent heat distribution. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Needed a new fan motor Wilma D. • Crown Point , IN • November 07, 2025
Took it apart and replaced it.
Read more
More
$121.57
- Compare At:
-
$145.88
- You Save:
-
$24.31
Genuine Ge part
By: Ge
Part Number: WB14X41386
Oven door won't close or lock properly? This range door latch and handle assembly secures the door during baking and self-clean cycles. DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door lock quick working Jerry C. • Virginia Beach , VA • February 17, 2020
Replaced the part.
Read more
More
$59.54
- Compare At:
-
$70.85
- You Save:
-
$11.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W11088181
Burner stuck on high or won't adjust temperature? This infinite switch controls heat levels on cooktop elements. DIY repair takes 1-2 hours with power off.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Burner in glass top range control only has off or full on modes Edward A. • Brookfield , WI • August 11, 2015
Based on internet search and data found on APPLIANCE PARTS PRO, I deduced that the "infinite control " module was most likely bad. Replaced it and all is good.
Toughest part was remembering how to disengage cooktop from down draft blower and then pulling the cook top up in within it's opening. Once pulled up, I put short 2x4's across the opening corners to support the cooktop safely while I worked on it. Next issue was figuring out exactly which screws held the glass top in place. As...
Read more
More
$77.69
- Compare At:
-
$93.23
- You Save:
-
$15.54
Genuine Ge part
By: Ge
Part Number: WB15X10047
Replace your cracked, broken, or missing range oven door handle. Mounts externally on the oven door for safe opening and closing during cooking cycles.
Do-It-Yourself Stories from Customers like You
Oven door handle broken Sam M. • Seymour , TN • July 18, 2015
Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door.
Read more
More
$89.95
- Compare At:
-
$106.14
- You Save:
-
$16.19
Genuine Ge part
By: Ge
Part Number: WB27T11233
Decorative adhesive faceplate for oven control panels. Replace if cracked, peeling, or damaged. Peel-and-stick installation covers button board.
Do-It-Yourself Stories from Customers like You
Oven touchpad peeling apart and looks bad but still functional Dennis M. • Florence , OR • April 18, 2023
I ordered the three parts listed and now my oven is beautiful, functional and like new again. I first had to figure out that the original parts are no longer available and had to perform an oven upgrade. Obviously the original design was flawed and the new design works perfectly and looks great! The whole repair cost was about $328 with shipping included. The parts were here in just a few days, about 2 to 4 days (some in two days, one in 4 days). Much cheaper and easier than replacing the...
Read more
More
$48.48
- Compare At:
-
$57.69
- You Save:
-
$9.21