Range Hood Parts

The Motor is an OEM part for Broan range hoods. It is responsible for driving the fan blades that ventilate cooking fumes, smoke, and odors from your kitchen. This motor ensures that the range hood operates effectively, maintaining good air quality by expelling unwanted air particles outside or filtering them.

Common causes of a bad motor include normal wear and tear, electrical malfunctions, or buildup of grease and debris that can strain the motor.

Symptoms of a bad range hood motor include:

• The fan not running or operating intermittently
• Unusual noises such as grinding or humming from the motor
• Reduced suction or airflow performance
• The motor overheating or emitting a burning smell

This OEM Broan part is essential for the proper functioning of your range hood, ensuring efficient ventilation in your kitchen.

The Motor Assembly is an OEM part for Broan range hoods. This part is the driving force behind the extraction and circulation capabilities of your range hood, efficiently removing smoke, grease, and odors from the kitchen air. 

Causes for replacement include noticeable decreases in suction power, abnormal sounds indicating mechanical wear, or failure to start, all of which can compromise your kitchen's air quality and comfort.

Symptoms of a bad Motor Assembly include:

• A noticeable reduction in exhaust efficiency, failing to clear smoke or odors effectively.
• Increased noise levels, such as grinding, humming, or buzzing, suggesting the motor is struggling.
• The range hood not operating at all, pointing to a potential motor failure.

Color: white.

The Grease Filter is an OEM part for GE range hoods. It is responsible for trapping grease and other particles from the air as it is drawn through the hood, helping to keep the kitchen environment clean and free of contaminants.  The filter measures approximately 9" x 16".

Causes of a bad grease filter can include clogging due to accumulated grease and debris, damage from cleaning or mishandling, and general wear over time that reduces its effectiveness. 

Symptoms of a bad grease filter include:

• Reduced airflow through the range hood
• Unpleasant odors lingering in the kitchen
• Grease buildup on kitchen surfaces
• Visible dirt and debris on the filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: The graphics on this part have been updated. The factory removed the round "GE" logo from the front of the cover.

This replacement switch box assembly is made by General Electric and is compatible with range hoods. The switch box assembly includes parts such as the fan switch, for turning on and off the fan, the light switch, and the motor, which drives the fan itself. All of these switches are necessary for proper equipment functionality. Over time, switches may become worn or jammed, or the switch box might become dented, bent, or otherwise broken, requiring replacement. Disconnect the range hood from the power source or turn off the circuit breaker before replacing this part.This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable metal and is only sold individually. This switch box assembly can be used with range hoods manufactured by General Electric, Hotpoint, RCA, and other brands.

This slide-style electrical switch selects or turns a function on and off inside the appliance. Replacing a worn switch restores reliable control when settings won't engage, respond intermittently, or the slider feels loose or broken. What it does

• Provides sliding on/off or multi-position selection for a specific feature
• Routes power to the associated component when a position is selected
• Helps restore proper response when a control becomes intermittent or unresponsive
• Common signs: slider sticks, feels loose, breaks, or shows heat discoloration on terminals

• 1 slide switch

• Disconnect power to the appliance before service
• Access the control panel; note wire locations and take a clear photo
• Move wires to the new switch one at a time; fully seat each connector
• Reassemble, restore power, and test each switch position

This motor/lamp switch is the user control for many GE range hoods. It turns the fan motor and hood light on and off, restoring reliable control when the original switch becomes worn, intermittent, or sticks.

• Provides on/off control for either the hood fan motor or the hood light, depending on model location
• Common symptoms: fan or light won't turn on, stays on, intermittent operation, or a loose/sticky rocker
• Restores reliable, positive switching of the selected circuit
• Direct-fit replacement designed for the original switch footprint

• Disconnect power at the breaker before servicing
• Remove filters and the control/trim panel to access the switch (procedure varies by model)
• Photograph or label wire positions; transfer one lead at a time to the new switch
• Seat the switch fully in its bracket, reassemble, restore power, and test operation

This knob assembly is a genuine OEM replacement part that is found on range hoods. The knob is used to turn the power off and on to the fan and light. This knob is made of durable plastic, but it may crack and break over time. If this happens, it isn't easy to turn the shaft to the off and position that powers the fan and light. When the knob is damaged, it should be removed and replaced with a new one. Tools are not required to remove and replace the knob. To start, disconnect the range hood from the outlet or turn off the breaker. Grasp it tightly and pull hard. The knob will pop off. Line the new knob up with the slot and push it in place. Restore the power to the range hood.This knob assembly is a black plastic molded part sold individually. It is designed for range hoods manufactured by General Electric.

This is a blower motor assembly intended for use with range hood fans. The blower motor assembly powers the fan that circulates air over the stove. With use, the blower motor assembly may malfunction or fail. When this part becomes damaged or stops functioning correctly, a replacement part is required to continue the effective use of the fan in the range hood.Signs that the blower motor assembly needs to be replaced include a fan that doesn't turn on or a fan that makes unusual sounds when operating. The replacement of the blower motor assembly is simple. Disconnect the range from its power source before starting the disassembly of the appliance. Wear gloves for protection. A screwdriver and a nut driver are necessary to complete the repair. The blower motor assembly is located inside the range hood. Lower the fan unit, disconnect the old blower motor and connect wires to the new motor for installation.This blower motor assembly is a genuine OEM replacement part. It is sold as an individual piece. The blower motor assembly is made of durable materials. It can be installed in several different models of ranges. The blower motor assembly is compatible with appliances produced by General Electric, RCA, and Hotpoint.

Restore dependable control with this replacement switch. It replaces a worn or unresponsive control so your unit responds consistently when operated, helping eliminate intermittent operation and no-response issues caused by fatigued contacts or mechanical wear. What it does

• Controls electrical power to the selected function within the unit
• Can resolve symptoms like no response, intermittent operation, or a switch that sticks or feels loose
• Installs in the original control location for a straightforward replacement

• 1 switch

• Disconnect power at the breaker before servicing
• Access the control area and note wire locations or take a clear photo
• Move wires one at a time to the new switch; ensure spade terminals are fully seated
• Test operation before reassembling covers or panels

This charcoal filter set restores odor removal for ductless range hoods. In recirculating mode, the carbon media adsorbs cooking smells and smoke so your kitchen air stays fresher and the hood performs as intended.

• Traps odors and smoke during recirculating operation
• Helps maintain airflow and ventilation performance
• Replace when saturated or damaged to keep odor removal effective
• Common signs it's time: lingering cooking odors, reduced smoke capture, heavily discolored filter media

• Disconnect power and allow the hood and lamps to cool before service
• Remove grease filters to access the charcoal filters; release clips/tabs, swap in the new set
• Seat filters securely; align any arrows or tabs as marked
• Charcoal filters are not washable—replace when saturated

Replacement curved metal filter that traps large food particles to protect the dishwasher pump and improve cleaning performance. Installs in the lower tub to help prevent debris recirculation and restore proper filtration. What it does:

• Catches and holds large food debris to keep it from re-entering the wash zone
• Helps protect the pump and drain area from clogging or damage
• Can improve wash results when damaged, clogged, or missing
• Durable metal construction designed for dishwasher use

• Disconnect power to the dishwasher before working on the filter area
• Remove the lower rack to access the filter; follow the dishwasher manufacturer's removal steps
• Clean the surrounding sump area and seat the replacement filter securely to ensure a proper seal
• After installation, run a short cycle and check for proper operation and leaks

Keep your range hood performing its best with this replacement filter set. These filters trap cooking byproducts and help maintain strong airflow, protecting the blower and interior surfaces from buildup for cleaner, more effective ventilation. What it does:

• Captures grease and airborne particulates from cooktop fumes
• Helps maintain proper airflow and ventilation efficiency
• Reduces residue inside the hood and on the blower
• Common signs it's time to replace: persistent smoke/odors, heavy discoloration or saturation, damaged frames/screens, loose fit or rattling

• Filter set

• Disconnect power to the hood and allow lamps/surfaces to cool before servicing
• Release the filter latches or tabs and support the filters as you remove them
• Install replacements with tabs/arrows oriented per the owner's manual; ensure each filter is fully seated
• Follow your manual's care guidance; replace filters that are damaged or cannot be adequately cleaned

This replacement blower wheel circulates air through the dryer to restore proper airflow for efficient drying and venting. Replacing a worn or damaged wheel can reduce noise and help prevent overheating caused by restricted airflow. What it does

• Spins on the dryer motor shaft to pull air through the drum and exhaust vent.
• Restores airflow to address long dry times and poor drying performance.
• Reduces rattling or scraping noises caused by a cracked, bent, or imbalanced wheel.
• Helps prevent overheating and burning odors that can occur when airflow is restricted.

• Disconnect power (and gas supply for gas dryers) before beginning any repair.
• Access may require removing the dryer drum or front panel depending on model.
• Inspect the motor shaft, mounting hub, and set screw for wear; ensure the wheel is seated and tightened to the shaft.
• Wear gloves and eye protection; check the exhaust duct for obstructions after installation.

This grease filter captures cooking residues in your kitchen ventilation system to protect the blower and ductwork. Replacing a clogged or damaged filter helps restore airflow and keep the area around your cooktop cleaner.

• Traps grease and particulates before they reach the blower and ducting
• Helps maintain proper ventilation performance and capture efficiency
• Replace if the frame or mesh is bent, torn, or the filter won't stay seated
• Common symptoms of a failing filter: reduced airflow, excessive grease buildup around the vent, or rattling from a loose/damaged filter

• Disconnect power to the ventilation unit and allow all surfaces to cool
• Open the access panel/grille, release the latch or pull tab, and remove the old filter
• Slide the new filter into the channels and ensure the latch fully engages for a secure fit
• Do not operate the ventilation system without all filters installed

Replacement top panel for the unit's housing. It restores a secure cover over internal components and proper airflow containment when the original top is bent, cracked, or missing, helping the ventilation system operate as intended.

• Forms the upper cover of the housing and shields internal parts
• Helps direct and contain airflow through the unit
• Provides mounting or clearance for components and wiring pass-throughs as designed
• Typical failure signs: dents or cracks, air leaks, vibration/rattling, reduced airflow, or trouble aligning fasteners

• Disconnect power at the breaker before servicing.
• Support the hood/assembly and remove filters or covers as needed to access fasteners.
• Keep track of hardware; transfer any gaskets, clips, or components from the original top.
• Edges can be sharp—wear cut-resistant gloves; align and tighten fasteners evenly to avoid gaps.