Range Hood Parts

This switch panel is the front control surface that houses the oven/range switches and user controls, restoring reliable input and visible indicators so you can select settings and operate the appliance with confidence. What it does:

• Provides the mounted switches and contact points for oven/range functions
• Transfers button presses to the control assembly so selections register correctly
• Restores visible indicators and tactile control when worn or damaged
• Commonly replaced when buttons stick, controls fail to engage, or the panel is cracked

• Disconnect power to the appliance before beginning any work to avoid shock
• Handle carefully to avoid damaging switch contacts, wiring, or cosmetic surfaces
• May require removing the console or back panel to access mounting screws and wiring harnesses

This part is the grease filter made to trap the grease from the exhaust air on an range hood. It is made out of metal mesh. It is important that this component is clean and clear for the range hood to operate at optimal levels. This product contains two filters.If the filter becomes clogged and cannot be cleaned with soap and water, then this will be a high-quality replacement part. Over time, the filter becomes dirt due to its function. If it begins to stink or become unsightly, the owner may wish to replace it. Doing so can often improve the overall performance of the oven hood.This particular set of grease filters is compatible with range hoods that have been manufactured by the Bosch and Maytag brands. This set is sold individually. It is sourced straight from the manufacturer as a genuine OEM part.

This silicone adhesive-backed seal replaces a worn or damaged dishwasher door/tub perimeter gasket to restore a tight seal and reduce leaks and dampness around the door. Flexible silicone resists common household temperatures and moisture. What it does:

• Forms a watertight barrier around the dishwasher door/tub edge to help prevent leaks during cycles
• Adhesive backing allows the seal to stick in place for consistent contact and reduced movement
• Commonly used when the existing gasket is cracked, flattened, torn, or no longer sealing
• Helps reduce water pooling, floor damage, and poor wash performance caused by door leaks

• One silicone adhesive-backed seal (33.75 in.)

• Clean and dry the mounting surface thoroughly before applying to ensure proper adhesion
• Peel backing and press seal into place, working slowly to avoid gaps or twists
• Trim excess if necessary with a sharp utility knife; avoid stretching the gasket while installing

This impeller is the rotating pump component that moves water through the appliance, restoring spray and circulation performance. Replacing a worn or damaged impeller helps resolve poor wash/rinse results and noisy pump operation. What it does:

• Drives water flow inside the pump housing to maintain proper spray and circulation.
• Can cause weak sprays, poor cleaning, or unusual pump noises when worn or broken.
• Fits the CW H98/HB style pump assembly and interfaces with the pump shaft and housing.
• Designed for direct OEM-fit replacement where this impeller is specified.

• Recommended for users comfortable disassembling pump housings; refer to your service manual for specific steps.
• Disconnect power and turn off the water supply before starting service.
• Inspect the pump housing, seals, and shaft for wear; replace any damaged components to prevent repeat failure.
• Use appropriate tools and handle plastic parts carefully to avoid cracking.

The Capacitor is an OEM part for Whirlpool range hoods. This capacitor functions to optimize blower motor performance. It works in tandem with the motor to efficiently expel cooking vapors and gases from the kitchen.

Causes relate to standard wear over extended use of the vent hood. Electrical issues can cause premature capacitor failure.  

Symptoms of a bad capacitor include:

• Reduced air circulation and weaker ventilation
• Abnormal humming or grinding noises from the motor
• Failure of the blower to turn on as desired

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This socket is an electrical wire terminal that provides a secure connection between wiring and a compatible appliance component, helping restore reliable power transfer and prevent loose or intermittent connections. What it does:

• Accepts and holds a mating terminal to complete an electrical circuit
• Restores a secure wire-to-component connection when the original socket is damaged or worn
• Helps stop intermittent power, sparking, or heating at a loose connection
• Used where a durable, removable terminal interface is required

• One socket terminal (single piece)

• Turn off and disconnect power to the appliance before servicing
• Inspect mating terminals and wiring; replace any damaged wires or connectors
• Push the mating terminal fully into the socket until it locks; ensure proper orientation

This cover plate is a factory-style trim panel that protects and finishes the appliance's control area and internal components, restoring a clean appearance and helping keep wiring and switches shielded from debris. What it does

• Covers and protects the appliance control area and underlying components
• Restores a finished look to a damaged or missing trim panel
• Helps prevent dust and spills from reaching electrical parts or switches
• Matches OEM fit and mounting points for a secure replacement

• One cover plate (trim panel)

• High-level replacement; typically removed and installed with basic hand tools
• Disconnect power to the appliance before starting to avoid shock or injury
• Inspect mounting clips and fasteners and replace if worn for a secure fit

This blower and motor assembly moves air through the appliance to support proper ventilation and heating. Replacing a worn assembly restores airflow and can reduce noise or overheating caused by a failing blower. What it does:

• Spins the blower wheel to circulate air through the appliance's airflow path
• Restores normal ventilation and heat distribution when the blower stops working
• Reduces rattling, grinding, or whistling noises from a worn motor or fan
• Helps prevent overheating or poor performance caused by restricted or non-moving airflow

• One blower and motor assembly as shown

• Disconnect all power before beginning service to avoid shock or injury
• Handle the assembly carefully to avoid bending the blower wheel or damaging wiring
• Basic hand tools typically required; follow appliance service manual for disassembly steps

This replacement switch knob restores tactile control of a range or oven control shaft, letting you safely set heat and function positions. It replaces a cracked, worn, missing, or hard-to-turn knob to improve usability and safety. What it does:

• Fits onto the appliance control shaft to select temperature or function positions
• Provides a stable grip and clear detent feel for accurate setting changes
• Replaces damaged, loose, stripped, or missing knobs that impede control
• Helps restore normal operation when a knob won't turn or slips on the shaft

• Disconnect power to the appliance before attempting service
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the shaft until seated
• If the old knob is stuck, use a firm, even pull—do not twist or pry aggressively to avoid damaging the control shaft

Package of 3. Measures approx. 12 7/8" x 10 1/4".

The Recirculation Kit is an OEM replacement part for Frigidaire ductless range hoods. Installed internally within the hood cavity, the recirculation kit captures and returns cooking vapors and odors back into the kitchen when vented exhaust is not possible. Crafted with carefully selected filters and efficient fans, the kit maintains a freshened ambient environment above the range.

Causes of a bad recirculation kit can include:  

• Clogged or dirty grease filters no longer trap smoke and smells
• Defective or failed internal fans that do not circulate captured air  
• Loose or degraded fasteners resulting in air leaks

Symptoms of a bad recirculation kit include:

• Persistent cooking odors filling the kitchen instead of being purified
• Reduced airflow and circulation around the cooking surface   
• Rattling noises or vibrations from insecure internal parts

This OEM Frigidaire replacement restores optimal smoke and odor elimination within the kitchen. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This refrigerator water filter cartridge removes common particulates and helps improve water taste and odor for built-in fridge dispensers. It replaces a used filter to restore clearer, better-tasting water to your dispenser and icemaker. What it does:

• Filters sediment and particulate contaminants from the water supply
• Helps reduce chlorine taste and odor for improved drinking water
• Supplies filtered water to the dispenser and icemaker when properly installed
• Helps prevent debris from reaching internal water lines and components

• Turn off the water supply to the refrigerator and follow the refrigerator manufacturer's removal/installation steps
• Push, twist, or pull per your refrigerator's filter access design; ensure a secure fit and clear seals
• After installing, flush several quarts of water through the dispenser to clear air and settled carbon fines
• Dispose of the used filter according to local regulations; follow the refrigerator manufacturer's recommended replacement interval

A replacement rocker-style switch that restores on/off control for range hood lights or fans, helping fix loss of power or intermittent operation. Simple direct-fit design for easy swap-out and reliable everyday use. What it does

• Provides on/off control for hood lights or blower motors where the original rocker switch failed
• Replaces a worn, stuck, or non-responsive rocker to restore consistent power
• Commonly used when lights won't turn on, fan won't start, or operation is intermittent
• Handles user input with a tactile rocker action for straightforward operation

• One rocker-style switch

• Disconnect power to the appliance at the breaker before servicing
• Remove the hood/light housing per the appliance service instructions to access the switch
• Note wire locations or take a photo before disconnecting leads to ensure correct reconnection

This replacement recirculating vent filter helps capture airborne particles and reduce cooking odors in range hood recirculation setups, keeping exhaust air cleaner and helping maintain ventilation performance. What it does:

• Captures grease and airborne particles that accumulate during cooking
• Helps reduce common cooking odors when used in recirculating mode
• Protects internal blower and ductwork from heavy buildup
• Supports consistent airflow and ventilation performance when clean

• One replacement recirculating vent filter

• Replace with the unit powered off and controls set to OFF; disconnect power if required for your model
• Slide or snap into the filter housing following the range hood's filter access method
• Inspect surrounding clips and seals; replace if damaged to ensure proper fit
• Check and replace regularly per the range hood manufacturer's maintenance recommendations

This motor run capacitor helps the appliance motor start and run more smoothly, restoring proper motor performance and reducing hum or startup problems. It's a direct-replacement electrical component used in compatible Whirlpool appliances. What it does:

• Provides the phase-shifted current the motor needs to start and maintain normal operation
• Helps reduce motor humming, slow starts, or intermittent motor stalls
• Restores proper motor torque and efficiency when the original capacitor has failed
• Works as the electrical timing/storing component for motor cycles

• One motor run capacitor

• Disconnect power to the appliance before attempting replacement to avoid electrical shock
• Discharge the capacitor before touching terminals; use insulated tools and follow safe procedures
• Match terminal configuration and mounting to the original part