Refrigerator Cap Or Cover
Genuine Samsung part
By: Samsung
Part Number: DA67-01650A
The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your appliance. Designed to protect the casing around the French doors, it helps prevent wear and tear, keeping your refrigerator looking new for longer. The durable construction of the Refrigerator French Door Cap provides reliable coverage against scratches and impacts, enhancing the overall durability of your fridge. Installing this cap is straightforward, allowing you to quickly restore the original look of your Samsung refrigerator without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your appliance operates smoothly. Whether you need to replace a cracked, missing, or damaged cap, the Refrigerator French Door Cap is the perfect solution to maintain the aesthetic and functional integrity of your Samsung refrigerator.
Do-It-Yourself Stories from Customers like You
French door center flap spring ripped out flap no longer opened automatically when door closed Jonathan R. • Mequon , WI • March 27, 2016
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps...
Read more
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12568001
Protective cover that secures and encloses the water filter in your refrigerator's interior. Replace if cracked, broken, or tabs are damaged.
Do-It-Yourself Stories from Customers like You
Water filter holder was broken John B. • Chester , VA • June 04, 2015
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box
Read more
More
$64.70
- Compare At:
-
$76.35
- You Save:
-
$11.65
Genuine Lg part
By: Lg
Part Number: ABN73019101
Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
No problem did not want filter for filtered water Rahul P. • Anaheim , CA • November 06, 2017
Replaced filter with plug.
Read more
More
$24.68
- Compare At:
-
$29.62
- You Save:
-
$4.94
Genuine Frigidaire part
By: Frigidaire
Part Number: 241733911
Protective cardboard or plastic cover that installs over the internal cooling system and wiring. Replace if cracked, torn, ripped, or missing.
Do-It-Yourself Stories from Customers like You
Needed a new cardboard piece for the back of the refrigerator (#89) Gertrude M. • Dania Beach , FL • August 30, 2020
I had to make a few different holes in the cardboard but it worked great!
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Samsung part
By: Samsung
Part Number: DA61-03166A
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Do-It-Yourself Stories from Customers like You
Broke the fixer cleaning the glass over the crispers bins Carl C. • Camden , NJ • November 16, 2018
Order a new fixer
Read more
More
$5.50
- Compare At:
-
$6.54
- You Save:
-
$1.04
Genuine Ge part
By: Ge
Part Number: WR02X10668
The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.
Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.
Symptoms of a bad Temperature Sensor Seal include:
- Inaccurate temperature readings.
- Condensation or frost near the sensor location.
- Frequent cycling or unusual patterns in the refrigerator's cooling process.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Fresh food side temp display says 37 degrees but inside ff side measures over 40 degrees. John N. • Southlake , TX • February 03, 2018
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost.
Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may...
Read more
More
$11.71
- Compare At:
-
$13.93
- You Save:
-
$2.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378134
Covers the rinse aid dispenser compartment on your dishwasher door. Replace if cracked, broken, missing, or won't stay threaded properly.
Do-It-Yourself Stories from Customers like You
Drying agent cap/lid was broken Prachi B. • Concord , CA • December 05, 2014
The drying agent lid was broken for a couple years now and our dishes would never dry completely. We finally decided to google for Kenmore parts and this website came up. Couldn't believe how easy it was. All we had to do was find the brand and model number and all the parts showed up on Appliancepartspros.com website. We scanned thru the list found the lid and ordered. It arrived within 2 days. Viola!!
Now we wish we had done this much earlier. Thank you for such a smooth experience.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2156007
Secures the door shelf bar in refrigerator doors, providing a finished look and stability. Replace if cracked, broken, or missing to restore support.
Do-It-Yourself Stories from Customers like You
Well the milk ketchup sode and other large items were falling on the floor oh oh time to Nancy H. • Sewickley , PA • January 09, 2016
Buy a new door shelf bar! I ordered it and two end caps (I didn't know the things
existed) and shortly the package came from Appliance PartsPROS.com. In a matter
of minutes I had a shiny new shelf bar and vavoom the refrigerator was as good
as new! No more juice, milk, or soda cleanup on the floor! Thanks for your good service with the video, also.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Ge part
By: Ge
Part Number: WR02X10322
This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.
Do-It-Yourself Stories from Customers like You
Evaporator fan started making loud noise from blade hitting shroud Kerry M. • Englewood , CO • October 03, 2016
Replacement of the evaporator fan motor, fan blade, and grommets.
The amount of disassembly to reach the part took most of the effort
Read more
More
$17.48
- Compare At:
-
$20.98
- You Save:
-
$3.50
Genuine Lg part
By: Lg
Part Number: 3110JJ1014A
Protects refrigerator light bulbs and sockets from moisture and impacts. Replace if cracked, melted from bulbs staying on, or discolored. Confirm fit.
Do-It-Yourself Stories from Customers like You
Refrigerator light was buring constantly generating excessive heat (2 60 watt bulbs) and melting plastic parts Nancy V. • Newport Beach , CA • November 06, 2015
Was able to diagnose problem at AppliancePartsPros.com by entering the model #. This is apparently a common problem with this Refrigerator
Replaced Light Socket Assembly, Lamp Reflector, Lamp Case and Lamp Cover. Also replaced the main circuit board (not sure if this was necessary).
The wiring on the Light Socket Assembly was different than the original, so it was a bit confusing how to assemble it, and no screws were provided to attach it to the Lamp Reflector - figuring this out took most...
Read more
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Ge part
By: Ge
Part Number: WR17X10779
Shields the ice bucket and maintains insulation. Replace if cracked, broken, or damaged. Installs on the dispenser assembly with two screws.
Do-It-Yourself Stories from Customers like You
The ice maker would not push the ice out Kurt K. • Lake Arrowhead , CA • April 18, 2015
I was able to order a new ice dispenser crusher cover and cover bucket dispenser and easily took off the broken ones and attached the new ones, and it works great again!
Read more
More
$69.25
- Compare At:
-
$83.10
- You Save:
-
$13.85
Genuine Ge part
By: Ge
Part Number: WR02X10647
Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.
Do-It-Yourself Stories from Customers like You
Ge side by side psc25 series ff section was not cooling well (42 degrees best it could do) Robert B. • Morgantown , WV • October 19, 2014
Common theme on the blogs was thermistors and or defrost heater/thermostat. Ran self-diagnostics which turned on defrost heater which was fine. All five thermistors indicated ok on diagnostic also, but I read more than one time "replace the thermistors no matter what if your FF section isn't cooling". So I ordered all five thermistors and defrost limiter thermostat. Received all in 48 hours (great shipping service), took me about three hours to replace all thermistors and thermostat just as...
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Samsung part
By: Samsung
Part Number: DA67-01701A
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
Do-It-Yourself Stories from Customers like You
French door center flap spring ripped out flap no longer opened automatically when door closed Jonathan R. • Mequon , WI • March 27, 2016
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps...
Read more
More
$10.71
- Compare At:
-
$12.85
- You Save:
-
$2.14
Genuine Lg part
By: Lg
Part Number: MCR66849208
The Refrigerator Air Filter Cover is an OEM replacement part for LG refrigerators. It provides a protective casing for the refrigerator's air filter. The air filter cover makes filter replacement easy while allowing uniform airflow distribution for optimal cooling and freshness.
Causes of a bad air filter cover can include cracks or breaks from normal use over time. Screws or securing mechanisms may also become loose.
Symptoms of a bad air filter cover include:
- Cool air escaping without circulating properly
- Inability to easily access the air filter for replacement
- Excessive refrigeration coil or evaporator fan noise
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken air filter cover. Thomas H. • Amery , WI • March 18, 2023
Replaced it with a new one.
Read more
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Whirlpool part
By: Whirlpool
Part Number: 67003796
This acoustic fiber is the sound-absorbing insulation used in a refrigerator's machine compartment. Replacing a missing or damaged pad reduces operating noise from the compressor area and helps maintain the unit's intended sound levels.
- Absorbs and dampens compressor and condenser fan noise from the rear machine compartment
- Helps reduce vibration resonance transmitted through the cabinet
- Restores sound control when original insulation is torn, saturated, or missing
- Common symptoms: increased humming, buzzing, or rattling from the back or bottom of the refrigerator
What's included: One acoustic fiber insulation pad. Install notes:
- Disconnect power and pull the refrigerator forward for rear access
- Remove the lower rear access panel and note the insulation's placement/orientation
- Position the new pad in the same location; keep clear of coils, wiring, airflow paths, and moving parts
- Reinstall the access panel and restore power; verify no contact or obstruction
Do-It-Yourself Stories from Customers like You
Vibration Dwayne C. • Flower Mound , TX • September 27, 2020
Balanced refrigerator
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49