Starter

This is a replacement fluorescent lamp starter designed for use with 80W, 240V fixtures. It helps the lamp reach full brightness reliably so lighting cycles start and run normally. What it does:

• Provides the initial pulse to ignite fluorescent tubes in compatible fixtures
• Commonly restores lamps that fail to start or take multiple strikes to light
• Can stop or reduce continuous flickering or rapid flashing at startup
• Works with starter-type ballasts specified for 80W / 240V operation

• Disconnect power to the fixture before servicing to avoid shock
• Typically replaces a plug-in starter in the fixture's starter holder—pull old starter straight out and push the new starter into place
• Confirm fixture voltage and lamp wattage match the starter specifications before installing

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This replacement part is a starter pulley. It is a genuine replacement part made by Husqvarna. These types of pulleys are commonly responsible for making sure that two different parts are working together. These two parts usually require a rotating or turning motion. The pulley is situated so that they are able to work together when the appliance is in use to help operate the engine.A new starter pulley might be needed if the turning or rotating motion inside the engine is not working properly. This can be because the pulley is broken or damaged in some way and not able to provide the motion for linkage of the parts. Because this part is situated near the engine, be sure the appliance is cooled off before attempting this repair.This pulley is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This recoil starter kit is a genuine Husqvarna part, sold individually. This recoil starter kit can be used as a replacement part for a tiller. This recoil starter kit comes with all of the components and fasteners required to facilitate a full replacement or a new installation of a recoil starter. The purpose of the recoil starter is to provide a mechanism such that the tiller can be powered on and the engine can be started through the pull-start system.The recoil starter kit might have to be ordered as a complete replacement for a recoil starter that is no longer working. If the recoil starter is chipped, cracked, punctured, eroded, or otherwise damaged to the point that it is no longer starting up the engine through the pull-start mechanism, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This recoil starter kit is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This rewind spring is a genuine Husqvarna part, sold individually. This rewind spring can be used as a replacement part in a string trimmer or an edger. The rewind spring maintains the placement of the pulley in the pull start assembly, allowing the rope to power the appliance.The rewind spring could be dented, punctured, warped, eroded, cracked, chipped, or otherwise damaged to the point of reduced functionality or negated functionality, in which case the rewind spring should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This rewind spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a starter hub replacement designed for use in select models of lawn and garden equipment. The starter hub is part of the starter system. The starter pulley will engage the hub, which will then engage the flywheel to start the motor. The hub is subject to constant repetitive motion and rotation, so it can often become worn or damaged over time. Without a functional starter hub, the engine will not be able to operate safely, which is why an OEM replacement is essential.It is important to wear gloves when performing engine repairs. In order to replace the starter hub, the old part will need to be removed from the starter assembly. Then, the new hub can be put in place and connected to the flywheel and the starter pulley. Be sure to disconnect the power supply before performing any engine repairs.This genuine OEM starter hub that is manufactured by Poulan. It is designed for use with select models of chainsaws. The hub is sold as an individual replacement part. There is no hardware included and other parts will require an additional purchase.

This part is a replacement recoil starter rope. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, snapped, or defective recoil starter rope in a variety of leaf blower models. This recoil starter rope wraps around the recoil starter pulley to supply power to the leaf blower. The rope may snap or become frayed and worn over time, and thus will require replacement. When working on or near any engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter rope, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this recoil starter rope is suitable for use on several different models of leaf blowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This starter pawl is a genuine Husqvarna part, sold individually. This starter pawl can be used as a replacement part in a leaf blower. The purpose of the starter pawl in a leaf blower is to function within the mechanism of the pull-start system so that the spring expands and contracts the starter pawl in order to release and coil back the starter rope that powers on the small engine of the leaf blower.If the starter pawl is dented, cracked, chipped, warped, or eroded to the point of reduced efficacy, the starter pawl should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter pawl is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This part is a replacement recoil starter assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective recoil starter assembly in hedge trimmers.The recoil starter assembly helps the engine to start up by spinning the crankshaft when the user pulls the rope. This part is critical, and if it is faulty in any way, the trimmer may not be able to start. Thus, when damaged, this part should be immediately replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This recoil starter assembly can be used with different models of hedge trimmers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This replacement part is a ratchet. This is a genuine replacement part made by MTD. This part has ridges on the edges and is used to help certain parts rotate or turn in the proper direction. A new ratchet might be needed if the user hears unusual noises coming from inside the machine. This can be due to a ratchet being out of place or damaged. A ratchet could become worn down over time and might not be able to operate as smoothly as before. Work gloves are recommended during this repair as the part can be sharp and possibly dangerous. Be sure the engine is turned off before beginning this repair. This part is a genuine OEM replacement part to ensure proper fit. This ratchet is sold individually and is sourced directly from the manufacturer.

A recoil pull-start assembly is the engine's starting mechanism. The machine operator pulls on the rope, which activates the pulley system to start the machine's engine. This part is a recoil pull-start assembly kit contains a rope, a pulley, and an innerspring, which are all of the components of the pull start assembly. A pull-start assembly kit may be needed if the recoil or pulley system has broken due to use over time. The rope may become broken or frayed and the plastic on the pulley could crack. While the rope itself is available separately, it's a good idea just to replace the entire pull start assembly kit while in the process of replacing any of the components to ensure even wear. This genuine OEM MTD part is sourced directly from the manufacturer. It is sold individually. It is used on blowers, vacuums, and trimmers that are manufactured by Craftsman, Bolens, MTD, and Troy-Bilt.