Need Help?
Call
Mower won't start unless seated? This seat safety switch prevents operation when the operator leaves the seat. Simple swap-out repair for most DIYers.
Usually ships within 4 - 14 days
This is a small return spring that attaches to the idler arm on a lawn mower or lawn tractor deck. It provides the tension needed to keep the idler arm in its proper position, ensuring correct belt tension for the blade drive system. Replace this spring if the mower blades won't engage properly, the drive belt slips or comes off, or the original spring is stretched, broken, or missing.
Anti-sway rod for riding mowers and lawn tractors. Replaces bent, damaged, or missing stabilizer rods. Mounts between deck and frame for stability.
Ordered another and put it on Read more
V-groove idler pulley for riding mower deck belt system. Replace if cracked, worn, or spinning unevenly. Maintains proper belt tension and alignment.
Tension spring for riding mowers and lawn tractors. Replaces worn, broken, or loose springs that no longer hold proper tension to secure components.
Replacement grip handle for riding mowers and lawn tractors. Provides secure grip while maneuvering. Order if your current handle is broken, cracked, or missing.
Mower won't engage blades? This clutch service kit restores power to your cutting deck. Includes clutch, washers, and hardware. Basic tools needed.
This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.
This hose can be used to replace a faulty or worn-out fuel line, which connects the fuel tank to the engine. In order to ensure that the fuel delivered to the carburetor is not contaminated, the hose should be directly connected to the in-tank fuel filter. This hose is made of durable, high-quality clear plastic.Over time, fuel lines can become worn, particularly with regular use. A faulty or deteriorated hose can cause gas leaks. Faulty fuel hoses can also cause a drop in fuel pressure which can lead to engine misfiring. This hose is a genuine Husqvarna replacement part that has been sourced directly from the manufacturer. This replacement fuel hose fits a number of different models of Husqvarna edgers, trimmers, and brush cutters. Please note this fuel hose is a genuine manufacturer part and is sold individually.
This foam air filter is a genuine replacement for select Husqvarna engines. The air filter is made from high-quality foam that allows it to capture particles and debris before they enter the carburetor to improve engine performance. The air filter naturally becomes clogged over time with regular use of the machine and will need to be changed regularly in order to prevent restricted airflow that could affect engine performance. It will require replacement as a part of routine maintenance, but intermittent repairs may come up, as well. It is often a good idea to keep an extra air filter on hand for emergency replacements. This genuine OEM part is the perfect fit for compatible engines. This genuine replacement air filter is designed for use with trimmers, pole saws, edgers, brushcutters, and other select models. This air filter comes pre-oiled and is able to be installed without any tools. Allow the engine to cool before changing the air filter or doing any other repairs. This air filter is sold as an individual unit.
Replacement bump knob for line trimmers. Secures the spool on the trimmer head. Replace if cracked, broken, stuck, or seized. Easy installation component.
This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.
This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.
Outer cover for string trimmer housing that clips into the reel bottom and secures behind the center button. Replace if cracked, broken, or missing.
Complete gasket kit for string trimmers. Replace when you notice fuel leaks or loss of compression. Includes all components for proper sealing. Confirm fit with your model number before ordering.
Replacement piston and cylinder kit for string trimmers. Restores engine seal and compression. Needed when original is worn, scored, or damaged.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.