Whirlpool Dishwasher Dishrack

Replacement dish rack assembly for dishwashers. Holds plates, bowls, and utensils during wash cycles. Order when original rack is cracked, broken, or worn.

Secures the fold-down cup shelf to your dishwasher's upper rack. Replace this nylon clip if it's cracked, broken, or missing to restore stability.

Color: White. Includes 125 caps used to cover damaged tips on your dishracks. For blue order 12022. For grey order 676458. To attach these tine tips you will need to order the dishrack white touch-up paint WP676453.

This upper rack adjuster sets and secures the dishwasher's top rack height so dishes clear the spray arms and load properly. When the adjuster wears or breaks, the rack can become uneven or stuck, leading to poor cleaning and loading issues.

• Provides the mechanism to raise/lower and lock the upper dishrack height
• Keeps the top rack level and secured to the rail during operation
• Common symptoms of failure: rack drops on one side, won't adjust, feels loose, or comes off the track
• Contribute to poor wash results when the rack can't be positioned correctly

• Disconnect power and water supply before servicing
• Remove upper rack end caps/stops and slide the rack out to access the adjuster
• Release or unfasten the old adjuster, transfer any reusable clips/wheels if applicable, and install the new adjuster
• Set both sides of the rack to the same height; reinstall rack and confirm smooth travel and secure locking

The dishwasher rack repair kit provides components to fix damaged dish racks, including replacement wheels, tines, and clips. Use this kit when rack wheels break, tines bend or snap off, or the rack becomes difficult to slide in and out smoothly.

White dishwasher rack repair kit includes 150 tine tips and vinyl paint to cover chipped, rusted, or worn rack tines. Extends rack life and prevents rust.

Replace your dishwasher's upper dishrack if it's cracked, rusted, or has damaged coating. This top shelf holds plates and bowls securely during wash cycles.

Plastic clip that secures the dishrack to the track inside your dishwasher. Replace if broken, cracked, melted, or missing to prevent the rack from sliding.

Secures the upper rack adjustable arm in place during loading and wash cycles. Replace if the clip is broken, worn, or missing to restore proper positioning.

Replacement dishwasher dishrack positioner that aligns and secures rack components. Install if your original is cracked, worn, or missing for proper fit.

Dishrack adjuster assembly for dishwashers. Mounts to upper rack and slides along track rails. Replace if wheels are broken, housing is cracked, or worn.

Replacement plate holder clip assembly that secures the appliance's glass plate or tray to the drive hub, helping restore stable, even rotation and reduce wobble or slipping during use. What it does:

• Secures the glass plate or tray to the drive hub so it rotates evenly
• Helps prevent the plate from wobbling, scraping, or slipping out of position
• Can reduce noisy or irregular turntable movement
• Supports consistent heating by keeping the plate aligned

• Disconnect power before servicing the appliance to avoid electric shock
• Remove the glass plate and turntable support to access the clip; handle glass carefully
• Press the clip onto the drive hub or shaft until fully seated
• After installation, reinstall the plate and run a short test cycle to ensure smooth rotation

This is a handle attached to the upper dish rack in a dishwasher, used to slide the rack in and out of the tub. It provides a grip point for loading and unloading dishes from the upper rack. Replace this part if the handle is cracked, broken, or has detached from the rack, making it difficult to maneuver the upper dishrack.

Secures the cup shelf to your dishwasher's upper rack. Replace this clip if it's broken, cracked, or missing to keep your cup holder stable and secure.

This is a rack adjuster mechanism that allows you to raise or lower the upper dish rack in your dishwasher. It attaches to the side rail and enables height adjustment to accommodate taller items on the lower rack. Replace it if the upper rack tilts, sags to one side, or the adjuster no longer locks into position.

This replacement dishrack restores secure loading and proper spacing so wash water reaches every item. Replacing a bent or rusty rack helps prevent tipped dishes and marks from flaking rust, and keeps loading/unloading smooth when the rack rollers are intact.

• Holds plates, bowls, and cups in place during wash and rinse cycles
• Maintains spacing for spray coverage and drying airflow
• Rolls in and out along the rails when paired with functional rack rollers
• Common symptoms include broken or bent tines, flaking coating or rust, items tipping, or difficulty sliding the rack

• Disconnect power to the dishwasher before servicing
• Open the door, pull the rack forward, release rack stops/end caps if present, and slide the old rack off the rails
• Transfer any reusable accessories from the old rack to the new rack as required by your model
• Slide the new rack onto the rails, reinstall rack stops, and verify smooth travel before running a cycle