Blade

Replace your riding mower's 21-inch cutting blade when damaged, bent, or dull. This blade installs under the mower deck for precise cutting performance.

Replacement cutting blade for hedge trimmers. Metal teeth contact cutting surface and can break, chip, or wear over time. Installs on trimmer head.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

Replacement blade holder for riding mowers and lawn tractors. Securely mounts and holds the cutting blade to the spindle assembly. Replace if cracked or worn.

Replacement mower blade for front-engine lawn tractors. Installs on the cutting deck. Replace when blade is bent, cracked, dull, or damaged for clean cuts.

Replacement cutting blade for riding mowers and lawn tractors. Installs under the deck to cut grass. Replace if blade is bent, cracked, or worn.

Note: This is ONE blade.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Replacement blade for gas walk-behind mowers. Installs under the mowing deck to cut grass. Replace if blade is bent, cracked, or dulled beyond sharpening.

This high lift blade is a type of lawnmower blade. Compared to other blades for mowers, its ends have deeper curves. This unique and distinct feature makes the blade more versatile. When you cut the grass, the deeper curved edges will eject the clippings to the bagger. A high lift blade features large wind wings that contribute to airflow. When there is an increase in air circulation, this means you can prevent grass from clogging and accumulating, especially when cutting wet and tall grass. Continuously using a high lift blade will dull its edges, which lowers its cutting efficiency. A broken or dull blade can result in unevenly cut grass. When this happens, a replacement blade should always be within reach. For a worry-free installation, be sure to have a wooden block and socket wrench. This original Husqvarna blade works with mower models from Ariens, Dixon, Craftsman, and Husqvarna. It will also work with other mowers with 46 decks. This brand-new high lift blade is sold-individually. Bolts and washers are sold separately.

This is a lift bagging blade for riding lawnmowers or tractors. Made to ensure that grass clippings make their way into attaching bagging units, they will wear down easily over time. The constant friction against the cutting edge also guarantees that a replacement will be necessary over the lifetime of the machine. Made of durable metal, the lift bagging blade installs relatively easily, but methods and tools required are going to vary based on the type of machine in use. Typically a socket set and file will be necessary for replacement. It is essential to follow the owner's manual when changing this blade and to ensure that the proper hardware is used, and to replace bolts or other components if they show signs of wear or failure. This OEM part fits 54 deck lawn tractors within the following brands: Husqvarna, Poulan, Roper, Sears/Craftsman, and Weed Eater, and others. This ships as an individual unit.

Left hand inner tines assembly for tillers. Installs next to outer tines on the left side. Replace if tines are worn, bent, or broken from soil cultivation work.

Outer tines for tillers that dig into soil for gardening. Replace when worn down, cracked, or broken from use. Durable metal construction for ground cultivation.

Outer tine assembly for tillers, left-hand configuration. Installs on tine shaft for soil cultivation. Replace if bent, cracked, or worn from impact.

Rotating tine assembly for front-tine tillers. Mounts to tiller axle to cultivate soil. Replace if tines are cracked, bent, or worn from rocks and debris.