Parts for Kenmore Elite 79641582412: Cabinet & Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Installation instruction sheet for your washer. Provides setup guidance and installation steps. Replace if missing, damaged, or illegible from previous use.

Main outer housing that encloses and protects internal washer components. Replace if cabinet is cracked, dented, rusted, or structurally damaged.

Rear cover panel for washers. Protects internal components at the back of the machine. Replace if cracked, damaged, or missing to restore appearance.

Washer suspension bush that cushions and stabilizes the drum assembly. Replace if cracked, worn, or causing excessive movement during spin cycles.

This is the outer rear tub assembly that forms the main watertight shell of the washing machine. It houses the inner wash basket and contains the water during wash and rinse cycles. Replace this assembly if you notice water leaking from the bottom of the washer, visible cracks in the tub, or excessive vibration caused by tub damage.

Secures the drum during washer transport or relocation. Replace missing, stripped, or damaged shipping bolts to prevent internal movement and damage while moving.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

Mounts inside the washer drum to lift and tumble clothes during the wash cycle. Replace if cracked, broken, or missing to restore proper agitation.

Mounts the door hinge to your washer's front cabinet. Replace if bracket is bent, broken, or missing to restore proper door alignment and sealing.

This bolt assembly is the shipping bolt used to secure a washing machine's tub and suspension during transport. Replacing a missing or damaged bolt helps protect internal components from vibration and impact when moving the appliance. What it does:

• Locks the tub in place to limit movement during shipping or relocation
• Helps prevent internal damage caused by excessive shaking in transit
• Restores a complete set when one shipping bolt is lost, bent, or stripped
• For transport only—remove all shipping bolts before operating the washer

• 1 bolt assembly

• Unplug the appliance and shut off water before starting
• From the rear, align the bolt with the shipping hole and hand-thread to avoid cross-threading; tighten securely without overtightening
• Install all shipping bolts required by your model (often four) before moving the unit
• After moving, remove all shipping bolts before use and store for future moves

The Bearing Ball is an OEM part for LG washing machines. This component plays a crucial role in the smooth operation of the washer drum, enabling it to rotate quietly and efficiently during the wash and spin cycles.

Causes of a bad bearing ball can include regular wear and tear, exposure to heavy loads, or insufficient lubrication. Over time, these factors can lead to deterioration and reduced performance of the bearing ball, potentially causing the washer drum to spin improperly or not at all.

Symptoms of a bad bearing ball include:

• Loud rumbling or grinding noises during the wash or spin cycles
• The drum not spinning or spinning unevenly
• Increased vibration or movement of the washer
• Leaks from the drum area due to damaged seals

This OEM LG part is also compatible with Sears/Kenmore models.

Supports smooth drum rotation in your washer. Replace if you hear loud roaring or grinding noises during spin cycles. Confirm fit with your model number.

Secures the spider assembly to the inner drum in your washer. Replace if bolt is stripped, loose, or missing to restore secure mounting and reduce noise.

Seals the rear tub to prevent water leaks during wash and spin cycles. Replace if you notice leaking or bearing noise. Confirm fit with your model.

Fix washer control issues with this multi-connector wiring harness. Restores electrical connections between control board, sensors, and motor components.

This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.

• Secures panels, brackets, and mounting points as specified by the manufacturer
• Replaces screws that are lost, damaged, corroded, or stripped
• Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
• Maintains proper alignment and stability of the assembly

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to its original location; start threads by hand to avoid cross-threading
• Use the correct driver; tighten snugly without over-torquing into metal or plastic
• Refer to your model's parts diagram to correct location and quantity

Fixes loud banging or clunking during spin cycle caused by loose or broken balance weight. Reduces vibration and stabilizes drum movement. DIY repair.

Protects the drum assembly and seals water inside during cycles. Replace if cracked, warped, or leaking. Confirm fit with your washer model number.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

Seals between front and rear outer tubs to prevent water leaks during wash cycles. Replace if you notice leaking or during bearing replacement. Confirm fit with your model number.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Motor harness wiring for washers. Connects motor to control board. Replace if wires are damaged, frayed, connectors broken, or harness is worn out.

Washer door won't close or latch securely? This door strike ensures proper door closure for safe operation. Easy DIY fix for common latch issues.

This three coil solenoid is used for the cold water, bleach dispenser and prewash.

Fix washer IE error or no water flow issues with this water inlet valve. Controls hot or cold water flow into wash drum. 15-minute DIY repair.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

Cabinet base assembly for washers. Forms the bottom structural support of the cabinet frame. Replace if cracked, rusted, or damaged from moisture exposure.

This control panel assembly is the complete user interface for your appliance, letting you select settings and view status. It replaces a worn, cracked, or unresponsive control surface to restore normal control and feedback. What it does:

• Provides the buttons/touch surface and display area used to select cycles, temperatures, and options
• Restores response when touch-buttons or keys stop working or feel intermittent
• Replaces panels with visible damage, cracked overlays, or faded markings that make controls hard to read
• Helps correct erratic or blank display behavior when the issue is panel-related

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the panel carefully to avoid glass or plastic damage and static-sensitive components
• Basic hand tools are typically required; some panels may need partial disassembly of the appliance

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace a broken, rusted, or missing leveling leg assembly. Installs at the base to stabilize your washer, reduce vibration, and adjust height.

Fix detergent not dispensing or a broken dispenser drawer. This washer detergent box assembly holds and releases soap properly. DIY-friendly repair.

This part may be black or gray in color.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Includes sensor probe

Replace your washer's water inlet hose if cracked, kinked, or leaking. This hose connects your water supply to the washer inlet valve for proper fill.

Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.

Fix washer dispenser overflows and leaks with this inlet hose. Connects water supply to detergent drawer for proper softener and bleach distribution.

Fix washer leaks or no water flow with this water inlet connector hose. Routes water from valve to dispenser. Direct-fit replacement for worn hoses.

Washer won't drain or shows OE error? This drain pump assembly removes water during spin cycle. Moderate DIY repair with video guide available.

Note: Per the manufacturer, the design changed  of this washer drain pump changed in April 2025. The new gray casing with different fins will still work, as the fins allow access for wiring.

Fix leaking water from the bottom of your washer with a new pump casing. Houses and protects the water pump. Moderate DIY repair with clear instructions.

Washer won't drain or shows drain error? This drain pump assembly removes wastewater from the tub. Moderate DIY repair, 1-2 hours with basic tools.

Washer won't spin or shows LE error code? The stator assembly converts power to spin the drum. Moderate repair, typically takes 30-60 minutes with video.

The Connector Hose is an OEM part for LG front-loading washing machines. It is a flexible vinyl tube that connects the water supply line to the individual water valves and nozzles inside the washer. As water flows through this hose during wash cycles, it must withstand pressure and thermal expansion/contraction.

Causes of a bad connector hose can include cracks, splits, or leaks developing from repeated bending and flexing over thousands of wash cycles. Mineral buildup or scale deposits inside the hose can also restrict water flow.

Symptoms of a bad connector hose include:

• Water supply issues such as low pressure, reduced flow, or leaks  
• Mineral deposits causing clogged or dripping nozzles
• Discolored or brittle hose material

Replacing the hose with a new OEM LG part restores proper water connections for improved washing performance. It is also compatible with Sears/Kenmore front-load washer models.

Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.

The Connector Hose is an OEM part for LG front-loading washing machines. It is a flexible vinyl tube that connects the water supply line to the individual water valves and nozzles inside the washer. As water flows through this hose during wash cycles, it must withstand pressure and thermal expansion/contraction.

Causes of a bad connector hose can include cracks, splits, or leaks developing from repeated bending and flexing over thousands of wash cycles. Mineral buildup or scale deposits inside the hose can also restrict water flow.

Symptoms of a bad connector hose include:

• Water supply issues such as low pressure, reduced flow, or leaks  
• Mineral deposits causing clogged or dripping nozzles
• Discolored or brittle hose material

Replacing the hose with a new OEM LG part restores proper water connections for improved washing performance. It is also compatible with Sears/Kenmore front-load washer models.

Restores proper door tension for smooth opening and closing. Replace if door sags, closes unevenly, or slams. Confirm fit with your washer model number.

Fix washer overfilling or won't fill issues with this water level pressure switch. Senses tub water level to control fill cycles. Easy DIY repair.

Flexible drain hose assembly that carries wastewater from your washer to the household drain. Replace if cracked, leaking, or damaged during installation.

Pivot hanger assembly for washers. Mounts inside the cabinet to support the tub suspension system. Replace if cracked, broken, or worn to restore stability.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

Protective access cover shields internal washer components from dirt and moisture. Replace if cracked, broken, or missing to restore factory protection.

Secures hose connections to maintain watertight seals in your washer. Replace if you notice leaks or loose hoses during operation. Verify fit with model number.

Secures washer tub assembly and hoses to prevent shifting during cycles. Replace if tub moves excessively or you hear rattling. Confirm fit with your model.

This clamp assembly secures a wash tub boot or drain hose to prevent leaks and keep connections tight during operation. It replaces a worn or loose clamp to restore a proper seal and reduce water leaks. What it does:

• Secures the tub boot or hose connection to the appliance, helping prevent leaks
• Keeps hoses and bellows firmly attached during cycles to reduce movement and wear
• Helps eliminate water dripping or pooling around the appliance inlet/outlet
• Can stop noise caused by a loose or shifting hose/boot connection

• Disconnect power and water supply before attempting any service
• Use appropriate tools to tighten evenly without over-torquing to avoid damage
• Inspect surrounding seals and hoses while replacing the clamp and replace if cracked or brittle

This noise filter assembly is an electronic component that suppresses electromagnetic interference (EMI) generated by the washing machine's motor and control circuits. It helps prevent electrical noise from feeding back into your household wiring. Replace this part if your washer fails to start, shuts off unexpectedly, or causes interference with nearby electronics.

Seals washer door to drum, preventing leaks during wash cycles. Replace when torn, cracked, or showing mold buildup. Verify fit with your model number.

Fix water leaking from bottom of washer with this nozzle connector. Attaches supply lines to tub fill nozzle for proper water distribution. Easy repair.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Replacement tub to pump hose for washers. Transports water from the wash tub to the drain pump. Replace if cracked, split, leaking, or damaged from wear.

Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

Replace your washer's drain hose if cracked, leaking, or damaged. Connects the pump to the standpipe for proper water drainage during wash cycles.

If your washer leaks during fill or has low water pressure, this water inlet connector hose restores secure water flow. Direct replacement part.

Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.

The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.

Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.

Symptoms of a bad hinge pin include:

• Difficulty opening or closing the washer door
• Door not staying securely closed during operation
• Squeaking or grinding noises when the door is moved
• Visible wear or damage to the hinge pin

This OEM LG part is also compatible with Sears/Kenmore models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.