Cooktop Glass Top Or Cook Top

This main top is the painted white cooktop surface that sits over the range frame, restoring a clean finished look and a stable platform for burners and grates. Replaces a damaged, rusted or dented top to improve appearance and function. What it does

• Provides the outer cooktop surface that supports burner heads, burner bowls/pans and grates.
• Covers and protects internal components from spills and debris while maintaining correct spacing for burners.
• Restores a flat, undamaged surface when the original top is dented, corroded, or has chipped paint.
• Helps ensure burners and grates sit level for safe, even cooking.

• One painted white main top (single unit as shown).

• Disconnect power to the range before starting any service; this part typically requires lifting or removing the cooktop and may expose wiring and sharp edges.
• Handle with care to avoid scratching the painted finish and wear gloves for protection against sharp sheet-metal edges.
• Basic removal often requires removing burner grates, burner heads, knobs and possibly the control panel—refer to the service manual for model-specific steps.

This is a glass main cooktop intended for use with stoves. It is the main component associated with holding cookware while meals are heated on the appliance. It is a protective glass cooktop that sits over many internal components of the stove, such as the heating elements. The glass main cooktop can be damaged, cracked, or scratched and require replacement.If there are large scratches, areas of damage, or the glass main cooktop has shattered, it will need to be replaced. Before doing so, the oven will need to be unplugged from the wall socket. A set of tools and work gloves will be needed during the process. The gloves will prevent injuries working with broken glass. To replace the glass main cooktop, open the oven door and unscrew the part from the stove. Take it up and disconnect the interior parts. Install the new part and turn back on power to the appliance.The glass main cooktop is compatible with ranges, stoves, and ovens made by KitchenAid. The part is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer.

This black cooktop is the top panel of the range. It forms the cooking surface and supports the surface burners, restoring a clean look and secure burner alignment when the original top is chipped, dented, or damaged.

• Serves as the main cooking surface and mounting platform for surface burners and related components
• Helps contain spills and shields internal components from heat and debris
• Corrects issues like warped or dented tops that cause burners to rock or sit unevenly
• Refreshes appearance when enamel is heavily chipped, scratched, or rusted

• Disconnect power and, if applicable, shut off gas supply before servicing
• Remove grates, burner caps, and burner heads; retain all screws and hardware
• Lift off the old top; transfer any brackets, insulation, and screws from the original top as required
• Reassemble carefully; check for leaks on gas models

Replacement cooktop surface assembly that restores the top of the range for safe, even cooking and a finished appearance. Use this part to replace cracked, warped, or cosmetically damaged cooktop tops. What it does:

• Replaces the cooktop surface so burners and grates seat correctly and cookware sits level.
• Protects internal components from spills, debris, and heat exposure.
• Stops visible cracks, chips, or warping that can cause smoke or poor burner contact.
• Restores the appliance's finished look and makes cleaning easier.

• Disconnect power (and shut off gas for gas ranges) before starting any work.
• Remove grates, burners, and knobs as needed; handle the surface carefully to avoid cuts or additional breakage.
• Some installations require two people due to size and weight—use proper lifting techniques.
• Follow the manufacturer's installation instructions.

This main top is the replacement cooktop surface for select electric ranges, restoring a flat, secure mounting area for burners and controls and improving appearance and function. What it does

• Replaces a damaged, dented, or warped cooktop top so burners and components mount correctly
• Restores a flush, stable surface that helps prevent gaps or misalignment around elements
• Addresses visible cosmetic damage like deep scratches, chips, or paint loss
• Helps eliminate rattling or instability caused by a bent or loose top

• One main top

• Disconnect power to the range before starting and verify the unit is de-energized
• Removal typically requires lifting the front edge and unfastening screws or clips; some models may require removing the control panel first
• Handle carefully to avoid damaging trim or finish; two people may be helpful for positioning larger tops
• Use manufacturer-recommended fasteners and verify alignment before fully tightening

This replacement inner oven door glass restores a clear viewing window and helps contain heat for safe, efficient baking. It fits into the oven door assembly to replace cracked, chipped, or cloudy glass. What it does:

• Restores a clear view into the oven cavity so you can monitor cooking without opening the door
• Helps seal the door to reduce heat loss and maintain consistent cooking temperatures
• Replaces cracked, shattered, or damaged inner glass that can compromise safety or appliance performance
• Matches OEM fit and form for a secure installation when used with the correct door hardware

• High-level job: remove the oven door, disassemble door panels to access inner glass; reassemble in reverse order
• Handle glass carefully and wear cut-resistant gloves and eye protection
• Inspect door seals and mounting clips during reassembly; replace any damaged hardware

This electronic control module manages oven functions and timing so the range heats and cycles correctly. It replaces a faulty control board to restore display, bake/broil control, and timed cooking features. What it does:

• Regulates oven temperature and heating cycles for bake, broil and timed operations
• Manages front display, clock and user control inputs
• Enables/controls sequencing of safety and heating elements
• Commonly replaces a module when the display is blank, controls are unresponsive, or oven cycles improperly

• Disconnect power at the breaker before starting any repair
• Handle the module carefully to avoid ESD damage; use anti-static precautions if available
• Follow the appliance service manual for removal and replacement steps; mounting hardware and connectors must be secured

Color: White

Color: White. For black order JEA8120ADBA. This Designer Line Jenn-air radiant module cartridge has a 3 spade and 1 round terminal on the end of its base. It features an ultra quick start radiant element with a glass ceramic surface.