Cooktop Knob, Dial & Button

This square burner control knob replaces a damaged or missing range/stovetop control knob, restoring secure grip and reliable temperature control for your burner. It matches the OEM shape and spline for a proper fit. What it does:

• Fits onto the burner control shaft to let you set and adjust flame/heat levels
• Replaces cracked, melted, loose, or missing knobs that are hard to turn
• Restores tactile control so settings click or stop at detents as intended
• Helps prevent accidental shaft access when the original knob is broken

• Turn off power to the appliance (and gas supply for gas range/stovetops) before servicing.
• Pull the old knob straight off the control shaft; align the knob spline and push the new knob on until seated.
• If knob is tight or stuck, gently wiggle while pulling; do not pry with metal tools.
• If control shaft or retaining clip is damaged, replace that component before installing the knob.

This white control knob replaces a worn or damaged selector on compatible Whirlpool range and oven controls to restore easy setting selection and a secure grip. Simple, direct replacement that returns normal knob operation. What it does:

• Replaces a stripped, cracked, or missing control knob so you can change settings easily
• Provides a clear pointer and tactile stop for accurate temperature or function selection
• Restores a secure fit to the control shaft for safe, reliable use
• Helps eliminate slipping, wobbling, or intermittent contact caused by a damaged knob

• Disconnect power to the appliance before servicing to avoid shock or injury
• Pull the old knob straight off the control shaft (use gentle rocking if needed) and push the new knob fully onto the shaft until seated
• Verify proper alignment of the pointer/indicator with the control markings before restoring power

This replacement infinite control knob lets you precisely adjust the heat level on an electric cooktop or range surface element. It restores a secure grip and clear pointer for accurate temperature control during cooking. What it does:

• Fits onto an infinite (infinite-tap) surface element control shaft to select heat settings
• Provides a clear pointer for accurate selection of low-to-high settings
• Replaces worn, cracked, or stripped knobs that slip or won't turn
• Helps stop intermittent or unreliable control caused by a damaged knob

• Remove power to the appliance before servicing for safety
• Pull off the old knob straight from the control shaft; push the new knob onto the shaft until secure
• Confirm proper fit and full range of motion before restoring power

The Burner Knob is an OEM replacement part for Whirlpool ranges. It is designed to control the individual burners on your range, allowing you to adjust the heat levels for cooking.

A bad burner knob can occur due to wear and tear, damage, or malfunction. If you notice symptoms such as difficulty turning the knob, a loose or wobbly fit, or the inability to adjust the burner heat properly, it may be time to replace the burner knob.

Symptoms of a bad burner knob include:

• Difficulty turning the knob
• Loose or wobbly fit
• Inability to adjust the burner heat properly

Repair your range by replacing the faulty or damaged burner knob with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Stainless

Replace a damaged or missing gas burner knob to restore smooth, precise flame control and a clean, finished look. This knob attaches to the surface burner valve stem so you can turn the burner on and adjust heat levels.

• Attaches to the surface burner valve stem to select Off/ignite/heat settings
• Restores positive feel and control when the original knob is cracked, stripped, or loose
• Helps ensure accurate flame adjustment during cooking
• Common symptoms: knob broken, missing, wobbly, or spins without turning the valve

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the valve stem
• Align the new knob with the valve stem and press straight on until fully seated
• Verify smooth rotation and proper Off position after installation

The Knob Thermostat Assembly is an OEM part for GE gas ranges. It allows for control of oven baking temperatures through the regulation of pilot lights and burners.

Symptoms of a bad knob thermostat assembly include:  

• Erratic or inaccurate temperature readings
• Difficulty selecting or maintaining desired heat levels
• Unstable or inconsistent baking performance   
• Improper ignition or control of range burners

Causes of a malfunctioning knob thermostat include continuous exposure to cooking heat and normal wear over extended use. The internal components experience constant adjustment and fluctuations that can lead to loosening or degradation over time.

This part works for some Hotpoint and RCA gas range models as well.

The Gas Range Knob Asm is an OEM component specifically designed for GE gas ranges. It consists of the sturdy knob handles used to turn gas burners on and off, or adjust flame levels. 

Causes of a bad gas range knob assembly include general wear and tear from frequent use. Exposure to cooking spillages and cleaning solutions may also negatively impact knob integrity if not properly cleaned.

Symptoms of a bad gas range knob assembly consist of:

• Difficulty turning knobs fully on or off  
• Knobs slipping out of set positions
• Knobs cracking, splitting, or signs of damage
• Inconsistent or uncertain burner control

This genuine GE replacement part is also compatible with some gas ranges from Hotpoint, Magic Chef, and select Kenmore models

This gas surface burner control knob replaces a worn or missing knob and restores smooth, accurate flame control. It's built for appliances that use a bladed (flat) valve stem for a secure, factory-style fit and feel. What it does:

• Turns the surface burner valve on/off and adjusts flame level
• Sized for flat-blade (bladed) valve stems to ensure proper orientation and grip
• Helps address: cracked or stripped knob, loose/slipping knob, missing knob, difficulty adjusting flame

• 1 gas surface burner control knob

• Ensure the cooktop/range is cool and all burners are off
• Pull the old knob straight off the valve stem; no tools typically required
• Align the blade-style stem with the slot in the new knob and press straight on until fully seated
• Do not force; if it won't seat, re-check stem orientation or inspect the stem for damage

The Infinite  Knob is an OEM replacement part for GE ranges. It allows you to easily adjust and control the heat settings of your range. A bad infinite knob can be caused by regular wear and tear, accidental damage, or exposure to heat and moisture. If you find that the knob is difficult to turn, loose, or shows signs of wear, it may be time to replace it.

Symptoms of a faulty infinite knob include:

• Difficulty in adjusting burner heat levels
• Loose or wobbly knob
• Damage or discoloration of the knob

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This burner control knob lets you set the surface burner level on your range or cooktop. Replace a cracked, worn, or missing knob to restore reliable control and a clean, matched stainless-steel look.

• Attaches to the burner valve/switch shaft to select settings from Off to High
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps the control turn smoothly and stay aligned with the indicator
• Restores a consistent appearance across all burner controls

• Ensure all controls are Off and surfaces are cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; if tight, pull evenly—do not pry against the panel
• Align the new knob hub with the stem and press straight on until fully seated

This control knob replaces a worn, cracked, or missing knob so you can accurately select settings again. It fits onto the control shaft and restores a secure, positive feel and clean appearance. What it does:

• Attaches to the control shaft to engage and adjust the setting
• Restores smooth, accurate selection when the old knob is stripped or loose
• Helps correct issues like a knob that spins freely or won't stay on
• Improves usability and cosmetics when the original is damaged or missing

• 1 control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the control shaft
• Align the new knob's insert with the flat/D-shaped or splined shaft and press on until fully seated
• The control moves through all positions and operates correctly

Color: Stainless

The Gas Range Control Knob Assembly is an essential replacement part designed to restore the functionality of your Samsung gas range. This genuine OEM part ensures a perfect fit and seamless operation, maintaining the quality and reliability you expect from your appliance. Crafted with precision, the knob assembly allows for smooth and accurate control of your burners, making it easier to adjust heat levels for all your cooking needs. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and providing peace of mind. Installing the Gas Range Control Knob Assembly is straightforward, allowing you to quickly get back to enjoying your kitchen without the hassle of complicated repairs. Whether your original knob is worn out, broken, or missing, this assembly offers a reliable solution to keep your gas range operating efficiently. Enhance your cooking experience with this high-quality, genuine OEM part that delivers both functionality and durability for your Samsung gas range.

This replacement control knob restores a solid, precise feel when selecting settings on your appliance. It replaces a cracked, loose, or missing knob so the control shaft engages properly and your chosen settings hold. What it does:

• Mounts on the control shaft to select functions such as cycles, temperature, or burner level
• Common symptoms: cracked/broken knob, loose or wobbly fit, knob falls off, turns without engaging the control
• Restores proper engagement so settings stay put during use
• Direct replacement sized to fit the original control shaft interface

• Includes 1 control knob

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the shaft—avoid prying against the control panel
• Align the new knob with the shaft and press firmly until fully seated
• After installation, rotate through settings to ensure proper engagement

The Knob Assembly is an OEM part for GE gas ranges. It serves as the interface allowing precise temperature and function control of the appliance. 

Causes of a faulty knob can include minor internal component wear, stresses from repetitive use, or impacts damaging knob connections over time.  

Symptoms include:

• Difficulty turning or fully engaging temperature or setting selections
• Loose, wobbly, or misaligned positioning on the control panel  
• Faded or degraded identifying markings on the knob face

This GE replacement restores easy, accurate usability of all range features. Compatible with Hotpoint, RCA and Kenmore appliances as well, it prevents further wear issues.
 

Replacement control knob that restores safe, reliable control and the original appearance to your appliance. The black finish matches existing controls and provides a positive grip for setting temperatures and functions. What it does:

• Replaces a cracked, melted, stripped, loose, or missing control knob so you can operate the control shaft properly
• Slides onto the control shaft to set temperature or function positions with a clear pointer
• Restores a finished look to the control panel and prevents accidental slips while adjusting settings
• Matches original-style black finish for a consistent appearance

• Always disconnect power to the appliance before servicing controls
• Knob typically pulls straight off the control shaft; align pointer with the control post when installing
• Do not force the knob if it won't seat—inspect the control shaft for damage or worn splines