Cooktop Gas Conv Kit Parts

Controls air-to-gas mixture at the burner inlet. Replace if cracked, broken, or missing to restore proper airflow regulation for efficient flame control.

Orifice hood directs natural gas flow from the orifice to the burner. Replace if cracked, damaged, or missing to restore proper gas delivery and flame.

Main venturi front for gas range burners. Installs between the gas valve and burner to direct gas flow. Replace if cracked, damaged, or corroded.

Converts your gas range from natural gas to liquid propane fuel. Includes all orifices and instructions. Needed when switching fuel types or missing parts.

The LP Conversion Kit is an OEM part for GE ranges. This kit allows the range to run on either liquid propane (LP) gas or natural gas and includes all necessary components for conversion.   

The LP Conversion Kit contains burner tubes, valves, and seals to adapt the range safely to run on liquid propane. Installation involves replacing components and adjusting gas pressure and burner flames accordingly.

Causes of a bad conversion can include worn burner tubes, seals, or valves that no longer properly regulate gas flow. 

Symptoms of an improperly converted or failing kit include:

• Incomplete ignition of burners   
• Unstable burner flames
• Gas leaks around valves or tubes
• Abnormal sounds or smells from the gas system

Replacing with this genuine OEM GE part ensures safe, reliable operation whether using natural gas or liquid propane. This conversion kit is also compatible with some Hotpoint, KitchenAid, and Kenmore ranges.
 

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Converts your gas range from natural gas to liquid propane fuel. Includes all surface burner orifices needed for fuel source conversion installation.

Converts your gas range between natural gas and LP propane fuel sources. Includes orifices and components needed for safe fuel type conversion.

Converts your gas range to use liquid propane instead of natural gas. Includes orifices, fittings, and hardware for safe fuel conversion.

This ignitor orifice assembly routes gas to the oven igniter so burners light reliably. It replaces a damaged or clogged orifice to restore consistent ignition and safe burner operation. What it does:

• Directs gas flow from the manifold to the igniter/pilot so the burner can light
• Helps restore proper ignition when the burner sparks but fails to light
• Replaces corroded, clogged, or damaged orifice hardware that can weaken flame
• Works with standard oven/range ignition systems that use a separate orifice assembly

• One ignitor orifice assembly

• Turn off gas supply and disconnect power before attempting service
• Basic hand tools required; avoid overtightening fittings to prevent damage
• Check for gas leaks with a non-corrosive leak detector after installation

Converts your gas range from natural gas to liquid propane. Includes orifices and components needed for safe fuel changeover. Order if converting to LP.

Securely holds the gas orifice in your cooktop burner assembly. Replace if cracked, broken, or damaged to maintain proper gas flow and safe operation.

This orifice spud positions the burner orifice for proper gas flow to the burner, helping restore consistent ignition and steady flame performance in gas ranges and ovens. It replaces a worn or damaged spud to help maintain safe burner operation. What it does:

• Secures the burner orifice in the burner tube so gas is delivered correctly to the burner
• Restores consistent flame shape and size when a damaged spud is causing uneven or weak flames
• Helps resolve ignition issues tied to a misaligned or broken orifice spud
• Works with the existing burner assembly and orifice insert to control gas flow

• Turn off the gas supply and electricity to the appliance before starting work
• Use basic hand tools; avoid overtightening fittings to prevent damage
• Check all connections for leaks after installation using a soap solution or approved leak detector

5-piece LP conversion orifice kit for gas range surface burners. Converts your range from natural gas to liquid propane fuel. Replace when switching fuel types.

Controls gas flow from valve to burner on gas ranges and stoves. Replace if damaged, clogged, or causing uneven flame distribution on cooktop burners.