Craftsman Parts

This genuine replacement part is a 9 x 2 inch MTD wheel complete assembly. This part is for use with walk-behind self-propelled lawn mowers. This complete wheel features link tread to provide better grip. This wheel assembly is the rear wheel, and attaches to the bottom of the mower to allow for good grip and smooth rolling, even on uneven ground. Over time, the wheels on a lawn mower can wear out or become damaged. This can reduce traction or affect the alignment of the mower. Replacing the wheel assembly is simple, but be sure to shut off the engine of the mower. Allow the engine to become cool before installing this part. Disconnect the spark plug to prevent the mower from accidentally starting. This OEM replacement part is made of high quality plastic, and is sourced directly from the manufacturer. This part is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Yard Machines and MTD lawn mowers.Please note: original part numbers 734-1836, 734-1837, 734-1838, 734-1981, 734-1850 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This is a rear wheel measuring 9 inches in diameter by 2.125 inches wide, designed for walk-behind lawn mowers. It mounts to the rear axle and provides traction and height support during mowing. Replace this wheel if it is cracked, wobbles on the axle, or has worn tread that causes the mower to track unevenly.

This is a complete wheel assembly for walk-behind and push lawnmowers. It is a single replacement wheel for the front wheels on a mower. Wheels may be damaged by impact with hard objects or from exposure to the elements over time. When the wheel is visibly damaged or otherwise does not roll as well as it should, it should be replaced.If the user is having difficulty pushing the walk-behind lawn mower, a visual inspection of the wheels will determine if a new part is required. Replacing a wheel on a lawn mower is simple. Tools including a socket set, pliers, and a screwdriver may be necessary to perform the repair.This wheel is a genuine OEM replacement part. It is compatible with MTD, Troy-Bilt, and Yard-Man machines. It is sold as an individual unit. The wheel is made of durable plastic.

Replacement washer for outdoor power equipment assemblies. Needed when original is damaged, missing, or worn. Essential for secure bolt connections.

This flat washer is used to attach the idler pulley in a number of small and medium sized gasoline powered engines. These engines include snow blowers, log splitters, riding mowers, lawn tractors, and chippers. Because the idler pulley is subject to a great deal of resistance when the pulley is engaged, eventually the pulley will wear out. Should there be a squealing sound when engaging the drive, the problem is likely the idler pulley. In these cases, the pulley must be replaced. It is a good idea to replace the surrounding hardware when replacing the idler pulley; tNhis includes the flat washer, which is subject to corrosion during heavy use. To replace the idler pulley, first detach the spark plug cap. If on a mower or tractor, drop the mower deck. Remove the original pulley and install in order: replacement pulley, hex bolt, flat washer, flange nut. Apart from dropping the mower deck, the only tools required to complete this installation may be a 9/16 ratchet and combination wrench. This washer is a genuine OEM replacement part, designed to perfectly replicate the original piece. This washer is compatible with Troy-Bilt, Yard Man, Yard Machines, MTD, and Craftsman devices.

Gear lubricant for snow blowers and lawn tractors. Replace annually or when gears run dry to ensure smooth operation and prevent wear. Verify fit with your model number.

Threaded nipple pipe connector for lawn tractors, log splitters, and chippers. Replace if cracked, stripped, or leaking to restore secure fitting.

Replacement shear pin for snowblower auger assembly. Designed to break on impact to protect the gearbox. Order when pin is sheared, broken, or missing.

Fastening screw for lawn mowers and tractors. Secures components throughout the equipment. Replace if stripped, broken, or missing during repairs.

Hex flange bearing for lawn tractors and riding mowers. Replace if you notice wheel wobble, rough rotation, or grinding noise. Confirm fit with your model.

Flange bearing restricts movement and prevents shifting in lawn tractor components. Replace if you notice wobbling or unusual noise. Verify fit with your model.

The bearing sleeve is an authentic part designed for use with lawn tractors of the riding variety. This bearing sleeve is located on the transmission shaft and used to assist in securing the bearing in its place. The location of this part means that it is susceptible to constant vibrations and other threats. This part can wear down over time and eventually require a replacement, or need to be replaced as a result of damage or a direct impact. Using a genuine product like this replacement bearing sleeve will provide an exact fit for compatible models. This genuine OEM bearing sleeve is manufactured to specific standards by MTD. It is compatible with tractors from MTD, RYOBI, Bolens, Yard Machines, Cub Cadet, HUSKEE, Yard Man, and Troy-Bilt. There are hundreds of tractors that can use this specific bearing sleeve. It is made of durable metal and sold as an individual unit. A wrench will be required for this part replacement, but it is an easy task that should not take a lot of time. Always disengage the engine before starting any repairs and ensure that it is not hot to avoid burns or causing potential damage.

Left-hand bolo tine blade for tillers. Attaches to the tine holder to dig and cultivate soil. Replace if bent, broken, or worn for proper tilling.

Deck lift cable for lawn tractors and riding mowers. Connects lift lever to mowing deck. Replace if cable is frayed, connectors are worn, or damaged.

21-inch grass catcher frame for walk-behind mowers. Holds and secures the fabric bag that collects clippings. Replace if bent, broken, or cracked.