Craftsman Parts

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

This replacement part is an ignition coil. This is a genuine replacement part made by MTD. This part is commonly found in line trimmers or edgers. This part ensures that the trimmer is able to start and stop according to the user's needs.A new ignition coil might be needed if the starting and stopping functions in the line trimmer are not working as effectively as during prior uses. This can be due to a faulty ignition coil, and if this is the case, it should be replaced. Be sure the engine is completely turned off before attempting to replace this part. Refer to the proper user manual for more information on this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

Idler pulley assembly for edgers. Mounts to the deck and maintains proper belt tension. Replace if pulley is cracked, worn, or spins roughly.

This is a replacement cutting chain designed for the pole saw attachment on a string trimmer. It wraps around the guide bar and performs the actual cutting of branches and limbs. Replace the chain if it has become dull, stretched, or has damaged or missing teeth, resulting in poor cutting performance or difficulty making clean cuts.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

Carburetor assembly for gas leaf blowers. Mounts between engine and fuel system to regulate air-fuel mixture. Replace if cracked, leaking, or worn.

Plastic flex tube for gas leaf blowers. Connects engine components for airflow. Replace if cracked, split, or worn from extended use.

This ignition coil module generates the high-voltage spark needed to ignite the fuel-air mixture in a gas-powered string trimmer engine. It converts low-voltage current from the flywheel magnets into the spark that fires the spark plug. Replace this module if the trimmer has no spark, won't start, runs intermittently, or stalls frequently - especially after the engine warms up.

This impeller can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of an impeller, which operates by rotation, is to take in the leaves and eject them out of the chute.An impeller might have to be replaced if it suffers damage that impedes it from properly ejecting the leaves from the chute. A common symptom of an impeller that needs to be replaced is that the leaves are not ejected with enough force from the chute or that the ejection process stalls or does not occur at all. If this is the case, the impeller should be removed and replaced with this genuine OEM replacement part immediately before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD, and it is sold individually. This impeller is compatible with the following brands: MTD, Troy-Bilt, and Yard Man.

Replacement flex shaft for gas line trimmers. Connects the engine to the trimmer head. Replace if bent, broken, or worn causing vibration issues.

This is a ratchet pawl assembly used in the recoil starter mechanism of a string trimmer. It engages the starter pulley to turn the engine over when the pull cord is yanked. Replace this part if the pull cord pulls freely without engaging the engine or if the trimmer fails to start due to a slipping or broken starter pawl.

Blade guard assembly for line trimmers. Protects operator from debris and rotating components. Replace if cracked, broken, or missing for safe operation.