Craftsman Parts

An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

This is a greaseable mandrel kit, also called a blade spindle assembly. It is the part of a riding lawnmower where the blade assembly fits. It's attached to the bottom of the engine with four self-tapping screws, which assure the stability of the spindle when the blades are turning. The mandrel assembly is a part of the riding mower that is intentionally meant to be the most breakable. This is by design, so the other, more expensive, more challenging to repair parts are spared. As a result, mandrels often need to be replaced. If you have to replace the mandrel, first take off the blade assembly and the mandrel cover. After removing the nut holding the pulley in place, remove the pulley. From there, it’s just a matter of unscrewing the four bolts holding the mandrel to the cutting deck. Replace the original mandrel with the new unit and walk back through the disassembly instructions. This is a genuine OEM part manufactured by Husqvarna and Poulan. The mandrel is also compatible with Ariens, Dixon, and Craftsman. This OEM part is sold individually.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This replacement foam air filter is an authentic OEM replacement part for both lawn tillers and cultivators. For a combustion engine to run effectively, the carburetor must maintain a balance of fuel and air. Therefore, the engine takes in air from the outside and mixes it with fuel. However, if the air is dusty, it will clog the carburetor and cause the engine to seize up. To prevent this from happening, manufacturers add an air filter like this one to capture any dust or debris. When lawn appliances are in use, they often kick a lot of dirt into the air. This means that air filters get a lot of use every time an operator uses their appliance. Eventually, the filter will reach max capacity, and air will no longer pass through it. When this happens, the filter will need replacing. Changing out an air filter is a simple job and will only require a screwdriver at most. This part is made for Cub Cadet, Troy-Bilt, and MTD tillers and cultivators and is sourced from its original manufacturer. This part ships individually.

This part is a sheave plate that is used on snowblowers. This part is attached to the auger housing base assembly and its purpose is to scrape snow up into the auger blades. A new sheave plate may be needed if there are any signs of wear or damage of any kind. If the snowblower is leaving behind strips of snow, this can be a sign that the sheave plate needs to be replaced; it's also one of the most common signs of a bad sheave plate. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This sheave plate is used on snowblowers manufactured by MTD and Craftsman.

In a snowblower, the driveshaft is connected to a part called a worm gear. The worm gear turns the auger blades which eject the snow. The worm gear is connected to the worm shaft, which causes the auger blade to turn rapidly. Eventually, the incredible torque inside the machine, plus the occasional bumps and bruises experienced by the machine in operation and when being stowed, may cause the worm gear to malfunction. When the snowblower is erratic in its operation and fails to remove snow completely, there is a good chance the problem is the worm gear. To replace the worm gear, remove the housing to get to the worm shaft. Remove the entire worm assembly. Next, remove the blower fan and remove the worm gear. Grease the auger assembly before installing the new gear. Reverse the order to reassemble. While the snowblower is disassembled, it's the best time so exam the auger, driveshaft, sheer bolts, and tires for wear. You may find other parts that need to be updated. Make sure to replace the worm bolt and any other necessary parts with a genuine OEM manufactured part such as this one. This gear can be used in a number of snowblowers, including machines made by Yard Machines, Craftsman, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, Ryobi, Montgomery Wards, Huskee, and MTD. Part sold individually.

This is a wheel assembly made specifically for use with snowblowers. The wheel on the snowblower adds support for the equipment and ensures it can easily be used and transported from one location to another. It is made of durable rubber and comes with both the tire and the metal rim. Both normal wear and tear and impact with other objects can cause damage to the wheel.If the snowblower is hard to move or the wheels seem wobbly or shaky, it could be the result of a damaged or broken wheel assembly. A visual inspection will indicate whether there is any clear damage to the component. If damage is present, for instance, if the wheel no longer spins, it will need to be replaced. Replace the wheel while the snowblower is on a stable surface and powered off. Remove the wheel and replace it with a new one.This wheel assembly is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. This wheel assembly is compatible with various snowblowers made by Craftsman, MTD, and Yard Machines.

The snowblower auger driver belt is made from high-quality rubber and has a special design that features cogs. The belt is what will rotate the augers in the snowblower. Belts in snowblowers and other types of equipment tend to wear down over time and use. The belt might begin to stretch and no longer be able to rotate the augers. It could also crack or break. If any of these things happen to the belt, it would require a replacement before the machine could be used again. The belt is relatively easy to replace when the time comes. The genuine OEM snowblower auger driver belt is sold individually. It can be used with a number of models of snowblowers from Craftsman, Yard Machines, MTD, Huskee, and Cub Cadet. Whenever buying a new belt or any replacement parts, owners should always check to see that they are buying the correct option for their make and model.

An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This genuine Husqvarna pulley can be used as a replacement part for lawn mowers. The pulley is a component on which a rope is coiled while attached to the belt drive; the function of the pulley is to move along with the belt drive, which maintains the rotation of the belt drive and keeps the lawn mower steering and operating.If the belt drive of the lawn mower is not working properly or is frequently slipping, this could be a symptom of a damaged pulley. Additionally, if the engine is stalling or misfiring frequently, this could be attributed to a broken pulley. If the pulley is damaged, it should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This pulley is compatible with Husqvarna brand lawn mowers.

This is a genuine replacement part designed for select lawn mowers and snowblowers. The carriage screw is responsible for securing various components on lawn tractors and snowblowers and has multiple locations and applications on different models. There is a square piece under the head that will fit into a square hole to secure the screw so that the nut can be tightened. This screw can become damaged over time or the threads can wear down with regular use. In some cases, these small screws are lost in the process of performing other repairs. A replacement with this genuine OEM carriage screw can get equipment back in working order. This OEM replacement screw is manufactured to exact standards by MTD. It can be used on hundreds of lawn mowers and snowblowers, including those from MTD, Craftsman, Yard Man, Troy-Bilt, Bolens, Yard Machines, Husky, and Cub Cadet. Since this part has multiple applications, users should refer to parts diagrams for exact location and replacement procedure. This durable screw is made of high-quality metal and sold as an individual unit. Those who need more than one will have to purchase multiple quantities.